Used Gesan Dps 65 for sale (7,742)

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 06/2027, loading space volume: 65 m³, total width: 2,550 mm, total height: 3,670 mm, Year of construction: 2020, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final agreement, errors, typos, and prior sale: Reisch 65 cbm sliding floor trailer (Trailer No. 674) First registration: 06/03/2020 Type: RSBS-3-10/C3V Permissible gross vehicle weight: 39,000 kg Unladen weight: 6,000 kg Payload: 33,000 kg Overall length: 11,000 mm Overall width: 2,550 mm Overall height: 3,670 mm Load volume: approx. 65 cbm MOT (TÜV) valid until: 06/2027, next inspection (SP) due: 12/2026 Roll-up cover, platform Clean floor, end pieces, sides, reinforced rear walls Portal doors 1/2 and 1/2 at the rear, grain slide Remote control Cargo floor LED work lights + reversing lights 2 x 12-ton, 2-speed geared winch Shovel and broom holder on the driver's side at the front Storage box, plastic, on the driver's side in the middle Air suspension with lifting and lowering function 1 lifting axle BPW drum brakes Hfsdjz Nb Enepfx Aipjn Tires: 385/65R22.5, 1.) approx. 70/80%, 2.) approx. 80/90%, 3.) approx. 60/60% ALCOA aluminum rims Extension ladder on the passenger side at the rear Access ladder behind the kingpin Half fender Price: €18,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Subject to errors, typos, and prior sale.

Year of construction: 2008, condition: used, Clamping force: 650kN, length: 4000mm, width: 1600mm, height: 2200mm, weight: 3.9t, an on-site inspection is possible. Hfedpfxszybvks Aipen

Condition: used, Year of construction: 1987, Pressing force: 65 t Stroke: 1100 mm Frame width: 930 mm Hjdpfx Aijzyl Dfopsfn Side frame opening: 705 mm

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Hfjdpfx Aexizansipon

Year of construction: 2006, condition: used, Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible. Hedpfx Aiezuzzvepjfn

Condition: used, functionality: unexamined, For sale is a Leybold RUTA vacuum pump unit in adapter configuration, consisting of a RUVAC WS 501 rotary lobe pump and a TRIVAC D 65 B rotary vane pre-pump. Hfsdpezzr Nkofx Aipjn Technical data and markings: - Configuration: RUVAC WS 501 / TRIVAC D 65 B / Adapter - RUVAC catalog number: 11732 - RUVAC nominal pumping speed: 505 m³/h - TRIVAC D 65 B, catalog number 11296 - TRIVAC serial number: 31000491088 - TRIVAC pumping speed: 65 m³/h - Pumping speed of the pump unit at 0.1 mbar: approx. 380 m³/h - Ultimate partial pressure: < 2 × 10⁻⁵ mbar - Installed motor power: approx. 4.4 kW - Connections: DN 63 ISO-K on the suction side, DN 40 ISO-KF on the discharge side - Druschke article number: SGWS501 - Druschke serial/ID number: 11732-ID15931 - RUVAC marking 2003/08; TRIVAC marking CW 31/2011 Visible scope of supply according to the images: - RUVAC WS 501 - TRIVAC D 65 B - Direct adapter - Side filter/separator housing - Connection line, cable, and plug - Base frame with drip tray Used condition with dirt, paint damage, and slight corrosion. The operational condition and achievable vacuum performance were not re-tested after disassembly; therefore, it is sold as untested. A control cabinet or frequency inverter is not shown and is not part of the described scope of supply. Scope of supply according to the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and by prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: excellent (used), Year of construction: 2007, CNC Lathe SPINNER TC 65 2007 ----- Dimensions / Weight Dimensions L × W × H (without chip conveyor): 2.73 × 1.44 × 1.62 m Footprint: 3.93 m² Total weight: 4,200 kg Swing diameter over bed: 425 mm Distance between centers: approx. 600 mm Max. turning diameter: 310 mm Axes Hfedpfx Ajzudxdsipon Max. travel X-axis: 230 mm Max. travel Z-axis: 740 mm Max. rapid traverse X-axis: 15 m/min Max. rapid traverse Z-axis: 24 m/min Main Spindle Speed (bore 32 mm): 4,500 rpm Spindle head Ø: 100 mm Max. Ø collet chuck: 250 mm Max. permissible collet jaw weight: 1.25 kg Spindle bearing diameter: 120 mm Capacity of clamping cylinder: 65 mm Tailstock Arbor diameter: 80 mm / MK4 Arbor stroke: 120 mm Adjustable travel of tailstock: 475 mm Max. clamping force (at 30 bar): 500 daN Turret Manufacturer: Sauter Type: 0.5.473.516 Type with tool drive: 0.5.480.516 Coupling system: DIN 5482 with gear B15×12 Number of stations: 12 Tool holder: DIN 69880 / 30 mm Driven stations (only TC65-MC): 6 Speed of rotating tools (only TC65-MC): 6,000 rpm Torques Main spindle Fanuc (S6 40 %): 178 Nm Main spindle Siemens (S6 40 %): 301 Nm Driven tool TC65-MC, Fanuc (S6 40 %): 7 Nm Driven tool TC65-MC, Siemens (S6 40 %): 9.5 Nm

Condition: used, Year of construction: 2000, functionality: limited functionality, machine/vehicle number: 1501, total width: 3,000 mm, total height: 2,700 mm, total length: 21,000 mm, overall weight: 4,000 kg, space requirement width: 5,000 mm, Used ASCOT BRICMATIC 1-65/150 briquetting press, manufactured in 2000. This unit features a triple production line configuration, designed for the efficient industrial compaction of wood residues, sawdust, and shavings into high-density biomass briquettes. It is a robust and reliable solution for woodworking plants and biomass production facilities. The machine is currently partially disassembled in our warehouse. Hsdpfxjzxyd Re Aipsfn

Condition: used, Year of construction: 2008, bar material dia. 65 mm turning speeds 5.000 min-1 Number of working hours 34979 h spindle hours 72260 h control FANUC 310 i weight of the machine ca. 8800 kg dimensions of the machine ca. 4500x1990x2300 mm Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Hjdpfsyat Hvjx Aipefn X2 AXIS DATA Stroke: 165 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm Translated with (free version)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Hjdpouiq Dhefx Aipofn Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), SPINNER TC600-65 SMCY | Year of manufacture 2012 | Y-axis | BMT45 | driven tools | Siemens 840D | 15 bar HPC For sale is a high-quality CNC turning center, the SPINNER TC600-65 SMCY, manufactured in 2012. Technical data: Manufacturer: SPINNER Werkzeugmaschinenfabrik GmbH Type: TC600-65 SMCY Year of manufacture: 2012 Machine number: AT0560 Working area: • Max. turning diameter: 400 mm • Max. turning length: 650 mm • Max. swing diameter: 600 mm • Travel in X-axis: 275 mm • Travel in Y-axis: mm • Travel in Z-axis: 700 mm • Spindle bore: 65 mm Tool system: • 16-position turret BMT45 • 16 driven tool stations Hsdpfx Aezgvgkeipefn • Spindle orientation • Tool measurement in the working area Control system: • Siemens 840D Equipment: • Y-axis for complex milling and drilling operations • 16-position BMT45 turret with driven tools • Direct measuring system in the X-axis • Tailstock • High-pressure coolant system 15 bar • Automatic sliding door • Robot interface for automation solutions • Hardened and ground slideways • Heavy-duty, FEM-optimized machine bed made of cast iron • High vibration damping for precise machining results Electrical data: • Mains connection: 400 V • Frequency: 50 / 60 Hz • Operating current: 53 A • Rated current: 63 A ✔ Y-axis and driven tools for complete machining ✔ Automation-ready via robot interface ✔ Powerful Siemens Sinumerik ONE control system Bar loader: CUCCHI GIOVANNI CNC-DB70 Stand loader 3300mm, 12-70mm diameter Year of manufacture 2012 is included in the price. The machine is in technically perfect and well-maintained condition and can be inspected under power by appointment. Further technical documentation, accessory lists, videos, as well as information on price and availability are available upon request.

Condition: new, Year of construction: 2026, SEM65/28 PVC Corrugated Pipe Extrusion Line Complete Production Line for Flexible Corrugated PVC Pipes Ø10–40 mm The SEM65/28 extrusion line is designed for continuous production of flexible corrugated PVC pipes. The line includes automatic material feeding, drying, extrusion, water-cooled pipe forming, automatic cutting and double-station winding. Equipped with Siemens PLC control and DELTA frequency inverters. Only one operator is required. 1. General Specifications * Model: SEM65/28 * Material: PVC * Capacity: 40–70 kg/h, depending on material * Pipe Diameters: Ø10, 16, 20, 25, 32, 40 mm * Wall Thickness: 1–2 mm * Production Speed: 5–30 m/min * Total Installed Power: 50 kW * Actual Power Consumption: Approx. 70–80% * Power Supply: 380 V, 3-phase, 50 Hz * Operating Direction: Right to left * Operators: 1 * Color: Grey * Installation Space: 11 × 2.5 × 3 m * Operating Temperature: +5°C to +40°C * Maximum Humidity: 85% Hfjdpfx Aoz Nkpwoipsn 2. Equipment Included 1. ZJ300 Vacuum Auto Loader – 1 unit 2. STG-U100 Hopper Dryer – 1 unit 3. SEM65/28 Single-Screw Extruder – 1 set 4. Extrusion Die Head with Interchangeable Tooling – 1 set 5. Corrugated Pipe Forming Mold Blocks – 3 sets Ø10-40, Ø25-20, Ø16-32 6. High-Speed Corrugator – 1 unit 7. Automatic Double-Station Winder – 1 unit 3. SEM65/28 Single-Screw Extruder * Screw Diameter: 65 mm * L/D Ratio: 28:1 * Screw Speed: 0–40 rpm * Main Motor: 22 kW, asynchronous * Motor Control: DELTA vector inverter * Screw & Barrel: 38CrMoAlA, nitrided * Heating Zones: 4 * Heating Power: 3.2 kW × 4 * Heaters: Ceramic * Cooling Fans: 4 × 0.18 kW * Feed Throat Cooling: Water * Gearbox: SJF-173 * Gearbox Lubrication: Forced * Gear Material: 20CrMnTi steel * Capacity: 40–70 kg/h * Control: PLC 4. High-Speed Corrugated Pipe Forming Machine Water-cooled corrugator with an enlarged cooling area for efficient pipe forming. * Main Drive: 4 kW induction motor * Speed Control: DELTA inverter * Forming Plate Hardness: 63.4 HRC * Cooling: Water * Vertical Adjustment: Electric * Horizontal Adjustment: Manual * Adjustment Motor: 1.1 kW * Platform Travel: 800 mm * Forming Method: Pneumatic blow forming * Vacuum Pump: 4 kW Automatic Cutting System * Pneumatic inline cutter * Adjustable cutting length * PLC control 5. Automatic Double-Station Winder * Type: Double-station * Drive: 12 N·m torque motor * Speed Control: Automatic synchronization * Traverse: Spindle speed tracking, frequency-controlled * Station Switching: Pneumatic self-locking * Air Pressure: 0.6–1 MPa 7. Wire device * Device for pulling a steel wire through corrugated PVC pipes during production, allowing easier cable installation 8. Applications Production of flexible PVC corrugated pipes for electrical cable protection, cable management, industrial installations and general-purpose conduit applications.

Condition: excellent (used), The REX Düker Hydro 65 is a bowl cutter from REX Düker, a recognized manufacturer of machinery for the meat industry. The machine is designed for chopping and cutting meat raw material for the production of sausages, cold cuts, and other products requiring precisely prepared meat batter. How does the REX Düker Hydro 65 bowl cutter work? The Hydro 65 is equipped with a 65-liter bowl and a 6-knife cutting head, driven by a 20 kW main motor. Thanks to the hydrostatic transmission, blade shaft speed is infinitely variable up to 4500 rpm, allowing the intensity of cutting to be precisely matched to the type of raw material being processed. The bowl rotates at up to 500 rpm in both directions, and the machine offers 3 separately switchable bowl speeds. Operation is controlled via an SL23 membrane keypad with contactor control and motor protection, while smooth speed regulation is available through a potentiometer. A digital display shows blade shaft speed, bowl revolutions, and temperature in real time, and safety switches for the bowl and temperature ensure safe operation. Key advantages of the REX Düker Hydro 65 The REX Düker Hydro 65 stands out with infinitely variable blade speed thanks to its hydrostatic drive, allowing the cutting process to be precisely matched to different recipes and types of meat raw material. Three independently switchable bowl speeds, together with bidirectional bowl rotation, further increase the machine’s operational flexibility. A robust stainless steel construction, a control panel with a digital display of operating parameters, and a noise protection cover combine high functionality with comfortable, safe operation — an important factor for daily, intensive work in a meat processing plant. Technical specifications of the REX Düker Hydro 65 Manufacturer: REX Düker Machine type: Hydro 65 Bowl capacity: 65 l Cutting head: 6 knives Main motor power: 20 kW Blade shaft speed: infinitely variable up to 4500 rpm (hydrostatic transmission) Bowl speed: up to 500 rpm, bidirectional, 3 speeds Power supply: 400 V, 50 Hz Hjdpfxsztxx Ne Aipefn Protection: 63 A slow-blow fuse Controls: SL23 membrane keypad, digital display Application of the REX Düker Hydro 65 bowl cutter The REX Düker Hydro 65 is used in meat and sausage processing plants, wherever precise chopping and mixing of meat raw material is required for the production of fillings, sausages, cold cuts, and other products with a uniform consistency. Infinitely variable blade and bowl speed make the machine well suited both to recipes requiring gentle cutting and to intensive chopping of raw material.

Condition: used, Year of construction: 2015, operating hours: 4,348 h, mast type: telescopic, fuel type: diesel, color: other, Equipment: all wheel drive, Drive: Wheel GVW: 10.121 kg Dimensions (LxBxH): 942 x 249 x 272 cm Make of engine: Deutz Lifting capacity: 227 kg Working height: 2.181 cm Maximum reach: 1.710 cm CE mark: yes Technical condition: good Genie S 65 telescopic boom lift Year of construction: 2015 Hours: 4348 h Engine: Deutz Diesel Weight: 10121 kg Working height: 22 m Horizontal outreach: 17 meters Lifting capacity: 227 kg Drive: 4X4 CE certified Hfjdpjz Au Tusfx Aipsn Generator Price excl. VAT

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 650 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 500 mm, number of axes: 3, This 3-axis Wenzel LH 65 was manufactured in 2018. It features a measuring range of 650 × 750 × 500 mm and includes a Renishaw PH6M probe head with a TP200 probe. The machine is equipped with online temperature compensation and active vibration damping for enhanced precision. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 65 CMM machine we have for sale. Contact us for further details. Technical Data • Measuring Range (X × Y × Z): 650 × 750 × 500 mm • Accuracy Standard: DIN EN ISO 10360 • Accuracy Class: Premium • Temperature Range: 18 °C – 22 °C • Maximum Temperature Gradient: 1 K/h • Maximum Temperature Gradient: 1 K/m • Maximum Temperature Gradient: 2 K/day • Probe Head: Renishaw PH6M • Probe: Renishaw TP200 • Probe Module: Standard Force (SF) • Probe Interface: PI200-3 • Probe Ball Diameter: Ø 4 mm • Probe Extension: 50 mm • Probe Extension: 100 mm • Adapter: PAA1 • PFTU, MPE: 1.6 µm • E0, MPE: 1.6 + L/350 µm (L in mm) Hfjdpfxszt Nr Hj Aipjn • E150, MPE: 1.6 + L/350 µm (L in mm) • R0, MPL: 1.6 µm • Standard Module • Stylus: 4 ×

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 2: KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Hsdpjxbhtrjfx Aipjfn Part no.: 48875108 Single-stage volute casing pump with nominal ratings according to EN 733, equipped with a KSB IEC three-phase motor, protection class IP 55, insulation class F, flange-mounted to form a monobloc unit. Pump shaft is rigidly connected to the motor shaft. Fitted with an uncooled mechanical seal, corrosion-resistant shaft sleeve, and replaceable wear rings. Drive lantern made of grey cast iron, with contact protection according to EN 294. Mounting via support foot up to motor size 112, and via motor foot from motor size 132 onwards. Volute casing: Grey cast iron Impeller: Grey cast iron Shaft, pump: Tempered steel

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 1: KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Part No.: 48875108 Single-stage volute casing pump with rated capacities according to EN 733, fitted with KSB IEC three-phase motor, protection class IP 55, insulation class F, assembled as a block unit. Pump shaft rigidly coupled to motor shaft. Equipped with uncooled mechanical seal, corrosion-resistant shaft sleeve, replaceable wear rings. Drive lantern made of cast iron, with contact protection in accordance with EN 294. Mounting by support foot up to motor size 112, by motor foot from motor size 132 upwards. Volute casing: Cast iron Hfedpfx Ajxbhtloipen Impeller: Cast iron Shaft, pump: Tempered steel

Condition: used, Year of construction: 2007, Number of working hours 20456 h spindle hours 75180 h control FANUC 310 i chuck diameter 175 mm turning speeds 5.000 min-1 weight of the machine ca. 8800 kg dimensions of the machine ca. 4500 x 1990 x 2300 mm Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Hodpfx Aijydfq Ijpsfn Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N X2 AXIS DATA Stroke: 165 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm

Condition: ready for operation (used), Year of construction: 2024, laser power: 3,000 W, number of axes: 5, Tube cutting machine manufactured in 2024. This Bodor T2-65-3000W features advanced technology for efficient cutting operations. If you are looking to get high-quality tube cutting capabilities, consider the Bodor T2-65-3000W machine we have for sale. Contact us for further details. Hsdpfezl Ur Aox Aipofn Model T230Tube size range Round tube：φ8-φ230mmSquare tube ：□8-□230mmRectangular tube 230mm≥Side length≥8mmI-beam 10#-14#Requirements for tubesDiameter＜φ50mmWall thickness of tubes≥1.2mm；Diameter≥φ50mmWall thickness≥2.5% of Diameters of tubesPneumatic chuck maximum load 300kg 46kg/mMaximum machinable tube length 6500mmMaximun unloading length 4500mmShortest remaining material 80mmLaser Power / Brand 3000W BodorPositioning Accuracy 0.05mmRepositioning Accuracy 0.03mmMax. Acceleration 1.5GMachine overall dimensions12650mm×2350mm×2500mmOverall weight 5060kg

Year of construction: 2015, condition: ready for operation (used), A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible. Hfedpfx Aiev Scrbjpsn

Condition: used, mileage: 409,199 km, power: 193 kW (262.41 HP), first registration: 03/2009, fuel type: diesel, number of seats: 65, gearing type: automatic, emission class: euro5, color: red, brakes: retarder, Year of construction: 2009, Equipment: ABS, air conditioning,

Year of construction: 2008, condition: ready for operation (used), Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X3 axis: travel: 165mm, max. speed: 40m/min, max. acceleration: 10m/s², nominal thrust (S1): 2400N. Z3 axis: travel: 678mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Y3 axis: travel: 80mm (+50/-30), max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Workpiece unloading (UA-WA): max. unloading weight: 4daN, max. unloading diameter: 70mm. Total number of tool stations: 12, tool holder diameter: 30mm, driven positions: 12, max. speed of driven tools: 4000/min, nominal torque (S1-n = 0/min): 17Nm, nominal power (S1-n = 4000/min): 2.9kW, control: Siemens 840D, operator panel: ErgoLine, screen: color TFT 19 inch, number of spindles (C-axes): 2, number of axes: 10, number of channels: 4. Operating hours: 70,035h power on, 48,657h in production, machine operates with cutting oil. With documentation and Bar Loader FMB Turbo 8-80 XT 3200. An on-site inspection is possible. Hfsdpfx Ajyln Ekoipjn

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Traub CNC turning machine TNC65DGY, TX8I, year of manufacture 2005, serial number 113* Y-axis on S1, V-axis, 2x C-axis, 2 rotating tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, parts gripper, without loading magazine. Very well maintained, in good condition, maintenance performed. Hfodpfx Aszfkbaoipjn Machine geometry has been checked and corrected/adjusted. Machines can be inspected while powered up – or a video is available. Approximately 4 weeks after order. Warranty of 6 months on main components as follows: Spindle bearing, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to the replacement parts, not to downtime or labor time, or travel time. The warranty expressly does not apply to other parts than those mentioned above, e.g. wear parts, electrical components, electronics, hydraulics, etc.

Year of construction: 2004, condition: used, An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement. Hfodpfx Aozu Sz Tsipen

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor Hfodpfswp D Nbsx Aipon 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *