High frequency spindle

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Lrjdpfx Apoz D Taajhst Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Lrjdpfxez A D Irs Aphot Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, empty load weight: 550 kg, total length: 3,210 mm, total width: 1,162 mm, total height: 2,050 mm, discharge height: 1,080 mm, machine/vehicle number: 2211410, TECHNICAL DETAILS Capacity, light vegetables: max. 400 kg/h Capacity, heavy vegetables: max. 800 kg/h MACHINE DETAILS Voltage: 3~ 400 V Frequency: 50 Hz Connected load: 7 kW Fuse rating: 25 A Water content: 500 l Protection class: IPX4 Dimensions & Weight Dimensions (L x W x H): 3,120 x 1,162 x 2,050 mm Machine weight: 550 kg Loading height: 1,140 mm Unloading height: 1,080 mm EQUIPMENT Barbotage system Frequency-controlled pumps Inverter control Stainless steel design Conveyor belt with product discharge Rinsing via spray device Height-adjustable feet Spiral water guide Ledoz Ahnrspfx Aphsrt Extended and raised product discharge zone, special design Extension of the product discharge zone: 200 mm Documentation

Condition: used, machine/vehicle number: BXMS230118020, No minimum price – guaranteed sale to the highest bidder! The new price was €4,950! TECHNICAL DETAILS Relief for the lower back: up to 25 kg Support force: continuously adjustable MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 600 x 600 x 600 mm Weight: 5 kg FEATURES Purely mechanical control at hip height Lsdpfjzz H D Aox Aphort Automatic deactivation of support during walking Force absorption during bending and force release during lifting Load transfer from the shoulders to the thighs via a support structure Energy storage Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 2000

Condition: used, Year of construction: 2019, battery capacity: 1,376 Ah, battery voltage: 80 V, overall weight: 2,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Battery type: 8 PzS Nominal voltage: 80 V Capacity: 1,376 Ah Voltage in idle state: 88.89 V Suitable for: Linde E70 and E80 Dimensions & Weight Dimensions (L x W x H): 1,290 x 1,030 x 770 mm Net weight: 2,500 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Lrjdpfjzz H Dpox Aphet Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1156

Condition: used, Year of construction: 2020, overall weight: 540 kg, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Fork adjustment: 4-way Fork length: 1,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,500 x 1,600 mm Self-weight: 540 kg EQUIPMENT 4-way fork adjuster Fork carriage Fork tines with 1,200 mm length All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lodpfxezz H Die Aphsrt Lot number: 1152

Condition: used, Year of construction: 2019, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity forklift: 2,500–5,000 kg Fork length: 1,350–2,000 mm Mounting: FEM 3A MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,350 x 800 x 1,000 mm Net weight: 250 kg EQUIPMENT Hydraulic telescopic forks For loading onto a pallet for truck loading All dimensions are approximate. No guarantee is given for typographical or measurement errors. Lodozz H A Ejpfx Aphort Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 1103

Condition: used, Year of construction: 2022, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS FEM class: FEM 3 Load capacity forklift: 3,000–5,000 kg Fork length: 1,350–2,350 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,350 x 1,000 x 1,000 mm Self-weight: 200 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Lsdpjzz H Afsfx Aphjrt Side loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of delayed collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1081

Condition: used, Year of construction: 2019, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Internal opening width: 70–940 mm Rotation range: 360° Fork length: 2,400 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,350 x 1,000 mm Self-weight: 1,000 kg Originating machine: Linde E50HL EQUIPMENT 3rd, 4th, and 5th valve Rotating clamp with 360° rotation function Lsdozz Hzzepfx Aphsrt Fork positioner Side shifter Fork, 2,400 mm long All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1013

Condition: used, machine/vehicle number: 90540056, Year of construction: 2017, operating hours: 788 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Ljdpfxjzz Hzuo Aphsrt Lifting height: 2,500 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 150 Ah Battery type: 2 PzB Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,720 mm Own weight: 800 kg Service valid until: 07/2027 UVV (Occupational Safety and Health) certificate valid until: 07/2027 Operating hours: 788 h All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 446