Profile grinder MAEGERLE - MGC-L 560

Mägerle MGC-L 560

Condition: good (used), Year of construction: 2010, Machine is in good condition. Parts shown by hand not come. Nodpfx Ahjx N Atfs Newf

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, table length: 4,500 mm, table width: 2,500 mm, spindle speed (max.): 22,000 rpm, CNC Heidenhain iTNC 640 WORKING AREA: Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE: Dimensions: mm 4.500 x 2.500 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE: Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. C-axis rotation range: ± 270° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Constant power range: rpm 3.000 to 18.000 Constant torque range: rpm 10 to 3.000 Tool interface: HSK-A63 DIN 69893 ELECTROSPINDLE HSK-A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM Spindle power (S1/S6): kW 37/43 Spindle torque (S1/S6): Nm 140/165 Maximum spindle speed: rpm 15.000 Constant power range: rpm 2.500 to 12.000 Constant torque range: rpm 10 to 2.500 Tool interface: HSK-A100 DIN 69893 CHAIN TOOL MAGAZINE – 55 POSITIONS, HSK-A100 / HSK-A63 Floor-mounted fixed chain magazine located at the rear of the machine, fully enclosed for operator protection, equipped with a vertical tool change arm and automatic tool pre-selection. Fixed-pocket management system. Hydraulic axis locking Total tools: No. 55 HSK-A63 tools (DIN 69893): Number of tools: No. 30 Max tool diameter: mm 90 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 300 Max tool weight: kg 10 HSK-A100 tools (DIN 69893): Number of tools: No. 25 Max tool diameter: mm 100 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 450 Max tool weight: kg 20 Njdpfx Aoyv In Ijh Newf REQUIRED CONNECTIONS Maximum installed power: kVA 177 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • High-pressure water and air through the spindle • Semi-automatic electrospindle change system with HSK-A63 and HSK-A100 interfaces • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 22049, functionality: fully functional, CNC horizontal machining center MAZAK HC NEXUS 5000-II + PALLETECH (6 Paletten) Mfg. year 2007 Mazatrol Matrix control movements: X-axis: 730 mm Y-axis: 730 mm Z-axis: 740 mm Distance spindle nose to spindle center 70-810 mm Distance spindle center to pallet surface 100-830 mm Pallet size 500 x 500 mm Nedpfx Ahspm Igze Nswf Max. workpiece dimensions Ø800 x 1000 mm Max. pallet load 700 kg Main spindle 30 kW Max. spindle speed 18.000 rpm BT-40 Tool magazine for 120 tools NC indexing table, 1° indexing Tool length measuring – Laser Renishaw NC4 Swarf conveyor, Tecnoforme Coolant through spindle Coolant tank 300 microns rotofilter 18 bar high pressure pump Pulse generator Palletech system with pallets and loading station CE-mark

Condition: used, Year of construction: 2017, Milling machines Travel distance X: 400 mm Travel distance Y :450 mm Travel distance Z: 350 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Heidenhain iTNC 530 HSCI spindle chuck: HSK-40 spindle revolutions: 42000 rpm Speed range to: 42000 U/min table size X: 400 mm table size Y: 400 mm max. workpiece weight: 100 kg tool changer: 68 - time input Power : 20 kW Torque: 30 Nm Rapid traverse: 50 m/min feed rate: 50000 mm/min Nodpfeym Rr Aex Ah Nswf spindle cooling chip conveyor control Heidenhain 5-axis CNC machining center designed for graphite machining Heidenhain iTNC 530 HSCI control 68-position tool changer HSK-40 high-speed spindle spindle speed up to 42,000 rpm KNOLL oil filtration system KF 400 / FKA 620 KNOLL chip conveyor ideal for electrode production high surface quality in finishing

Condition: good (used), Year of construction: 2009, operating hours: 22,100 h, functionality: fully functional, HECKERT HEC 1250 ATHLETIC PINOLE For sale is a Heckert HEC 1250 Athletic Pinole horizontal machining center, year of manufacture 2009, currently in ongoing industrial operation. The machine is in exceptionally well-maintained condition and fully functional. It has undergone consistent preventive maintenance over the years. Documented maintenance was performed in 2012, 2014, 2016, 2017, 2018, and 2019. Documented inspections took place in 2021, 2022, and 2023. In 2025, the ZP-KGT was replaced. The machine has approximately 50,100 operating hours. The machine is equipped with a Siemens SINUMERIK 840D Solutionline control and is ideally suited for machining large and heavy prismatic workpieces. The combination of NC rotary table, quill support, SK50 interface, and large tool magazine makes the unit highly suitable for multi-sided machining, heavy-duty cutting, and complex machining tasks requiring minimal setups. Technical Data Manufacturer: Starrag Heckert Model: HEC 1250 Athletic Pinole Year of manufacture: 2009 Machine type: Horizontal machining center Control: Siemens SINUMERIK 840D Solutionline Potential total number of axes (according to documentation): 5 Travel X-axis: 2200 mm Travel Y-axis: 1500 mm Travel Z-axis: approx. 1850 mm Tool holder: DIN 69871 SK50 Tool magazine: 280 positions Max. tool length: 450 mm Max. tool diameter: 250 mm Nwodpfx Asx Syhroh Njf Max. tool weight: 35 kg Measuring probe: Renishaw MP10 Pallet system: 2-pallet system Pallet size: 1000 x 1250 mm Additional pallets (as per documentation): 4 pallets with threaded holes / T-slots Mains connection: TN-C, 3/PEN AC 400 V Rated current: 250 A Connected load: 130 kW Compressed air: 6 bar Operating hours: approx. 50,100 h Features Quill support NC rotary table 280-position tool magazine Renishaw measuring probe MP10 Oil pan Platform Coolant system Chip suction unit Documentation / operating manuals included Maintenance and history Documented maintenance: 2012, 2014, 2016, 2017, 2018, 2019 Documented inspections: 2021, 2022, 2023 2025: ZP-KGT replaced Availability Machine located in Augsburg Dismantling possible from 31.03.2026 Collection by 29.05.2026 Viewing by appointment Scope of delivery Machine as described Without tools Without additional spare parts

Condition: used, Year of construction: 2020, Technical details: turning diameter: 670 mm turning length: 1540 mm control: F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover: 700 mm Travel turret No.1 (milling spindle) x/y/z: 495 / ± 150 / 1562(+164) mm Rotation B-axis: -30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/40/40 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 20,2/18,8 kW Torque of milling spindle: 120 / 44 Nm tool taper milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool/tool, milling spindle: 1,25 s Spindle 1 RPM: 3000 1/min Spindle 1 Power: 36 / 30 / 25 kW C-axis spindle 1: 0,001 ° Bar capacity spindle 1: 102 mm Spindle 2 RPM: 4000 1/min Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0,001 ° Bar capacity spindle 2: 80 mm dimensions of the machine ca.: 7,8 x 3,6 x 2,9 m Linear scales on axis: X, Y programmable steady: KLU-A530 & SLU-X3.2 Accerories Chip conveyor tool setting spindle load monitor Airblow system Nedeyv E T Uepfx Ah Nowf Airblow system internal to cutting tool Spindle 1 Chuck Kitagawa 250 (B 210) mm Spindle 2 Chuck Kitagawa 250 (B 210) mm Interface for coolant through the spindle 70 bar Tailstock specification for spindle 2 Measuring probe for work piece Renishaw OMP60 pendant hand wheel Parts and total counter Signal lamp 3 colors Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear window Quick fixed cycles Program restart Signal lamp 4 colours Ethernet I/P Interface manual tool eye Automatic door Air Filter Oil skimmer Tactile sensor for workpiece measuring Airblow system external Subspindel Spindle 1 coolant jet Spindle 2 coolant jet Coolant Gun Coolant through spindle 70 bar with filter Knoll High performance turning and milling center with multi axis milling head, 76 tool magazine Capto C6, main- and sub spindle, which can act as tailstock. It has automatic door and Matris robot R-2000iC/165F. *

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Nedpfx Ahox Tdyze Newf Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: ready for operation (used), Year of construction: 2007, PAMA ACC 200/500 CNC boring machine Control - Siemens 840 DSL Fully retrofitted in 2007 Spindle diameter - 200 mm Nodjx Nw Uqepfx Ah Njwf Spindle speeds - 1,500 rpm X axis travel - 9,000 mm Y axis travel - 4,150 mm Z axis travel - 1,700 mm W axis travel - 1,150 mm V axis table feed travel - 2,500 mm B axis - 360° / 1.5 rpm Ram dimensions - 530 x 600 mm Milling spindle diameter - 250 mm Spindle taper - ISO 50 Spindle motor power - 75 kW Rapid traverse - 10,000 mm/min Feeds - 6,000 mm/min Table PAMA TGM 2025 - 2,500 x 2,000 mm, travel 2,500 mm Table load capacity - centered balance 40 tons Video of machine under power available! Floor plates supplied with the machine! Machine still under power!

Condition: used, spindle diameter 160 mm x-travel 10500 mm y-travel 4000 mm spindle taper ISO 50 z-travel 950 mm turning speeds 3,15-1000 U/min transmission ratio 4 Nwsdpoyqvzwsfx Ah Nof spindle power 58 kW Support sleeve 340x400 mm w-travel 900 mm Feed x 0,12-9600 mm/U Feed y/z/w 0,1-5600 mm/U Plate area 39,5 m² Plate 5400x3500 mm Plate 5900x3500 mm T-slot - distance 365 mm T-slots 35/75 mm Thickness of the plate 360 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team