Hydraulic guillotine shear

LVD CS 13/31

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Gedpfx Aoydpxvshdjkc Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: excellent (used), Year of construction: 1997, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 200 mm, side roll diameter: 280 mm, roller length: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 7,250 kg, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, power: 6 kW (8.16 HP), 4 roll plate bender HAEUSLER - VRM-HY MACH-ID 9604 Make: HAEUSLER Type: VRM-HY Control: HAEUSLER CNC Rolling width: 3000mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending: 3mm Top Roll Ø: 200mm Bottom Roll Ø: 280mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Gksdoy Expuopfx Ahdoc Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 6kW Length: 6000mm Width: 2000mm Height: 2000mm Weight: 7250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, sheet width 3100 mm plate thickness 10 mm Gedpfxoyv Nhcs Ahdekc pre-bending 8 mm upper roll diameter 270 mm lower roll diameter 250 mm side roll diameter 210 mm total power requirement 11 kW weight of the machine ca. 7750 kg Overall size 5600x1450x1600 mm

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34368, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 170 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table length: 3,050 mm, table height: 950 mm, throat depth: 400 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, Equipment: CE marking, safety light barrier, Hydraulic press brake LVD PPEC-5 170/30 Touch Year of manufacture: 2008 Serial number: 34638 Technical specifications Force: 1700kN Working length: 3050mm Distance between uprights: 2600mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Table width: 150mm Approach speed: 100mm/s Working speed: 10mm/s Return speed: 100mm/s Weight: 11000 kg Gsdezl Uchepfx Ahdokc Motor: 15kW COMMAND CONTROL CNC TOUCH LITE CNC 5 axes Y1 Y2 X R V • Table V-axis PP8170 • Reach of X-axis: 600mm • CE marking “PP3580” • Top tool clamping Eurostyle, 15 pcs • Back gauge X-R duo PP8098 • 2 front supports • 2 fingers on back gauge

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Gksdsyzc Iajpfx Ahdec Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Year of construction: 1996, condition: good (used), machine/vehicle number: 9605075, Offer 22537 Technical data: - max. working width 4040 mm - max. cutting capacity St 40 6 mm - Cutting angle, hydraulically adjustable 0.5 - 3° Gsdpfx Aheimq A Ijdskc - Cutting gap adjustment, hydraulic - Number of hydraulic clamping cylinders 22 pcs - Motorized backstop with positioning control 10 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 15 strokes/min - Hydraulic drive 400 V / 7.5 kW - Pneumatic connection 6 bar - Table height 770 mm - Space requirement approx. W 5100 x H 2250 x D 2150 mm - Weight approx. 9000 kg - includes: - Electronic foot switch - Cutting line illumination - Sheet metal lifting system, pneumatically assisted

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 3100 mm Range back gauge 1000 mm Gedpfxsyag Uae Ahdjkc Min. cutting angle 0.5 ° Max. cutting angle 3.5 ° Number of sheetholders 17 Min. number of strokes/min. 6 Max. number of strokes/min 30 Min. blade clearance 0.1 mm electric powerd back guage with elgo "go-to" controller plate following system at back guage

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, controller manufacturer: Robosoft, controller model: PC90, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 14 1/min, sheet thickness (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, back gauge: 1,000 mm, overall weight: 8,500 kg, total length: 4,100 mm, total width: 2,400 mm, total height: 2,300 mm, Maximum sheet thickness: 12mm Max. cutting length: 3100mm Strokes on full length: 7mm Strokes in short 1000 length: 14 Cutting angle: 0,5 - 3° Length backgauge: 0 - 1000mm Number of down holders: 18 Operated mechanical or hydraulic:Hydraulic Power: 24kW Length: 4100mm Width: 2400mm Height: 2300mm Gkjdpfx Ajzvf Hrjhdsc Weight: 8500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 2002, Equipment: CE marking, type plate available, Model VR 13/3000 with numerical control, motorized back gauge, blade spacing adjustment, angle adjustment, and rear sheet metal support. Gedpjzrzkxsfx Ahdekc

Condition: ready for operation (used), Year of construction: 1974, machine/vehicle number: 5470, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 200 t, stroke length: 250 mm, table width: 250 mm, table length: 3,000 mm, table height: 800 mm, throat depth: 300 mm, ram plate length: 3,000 mm, distance table to ram: 500 mm, clearance between the columns: 2,550 mm, total length: 3,500 mm, total width: 2,000 mm, total height: 3,550 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Force: 2000 kN Working length: 3000 mm Distance between uprights: 2550 mm Gksdpfxozzxdue Ahdoc Stroke: 250 mm Distance table – ram: 500 mm Gap: 300 mm Table width: 250 mm