Hydraulic guillotine shear

LVD HST-C 31/16

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg Fedpfeydpxvox Ahdjpn

Year of construction: 2007, condition: ready for operation (used), A Beyeler press brake, today Bystronic, is available. Working length: 4100mm, press force: 2250kN, max. stroke: 400mm, throat depth: 250mm, installation height: 917mm, rapid traverse down/up: 150mm/s, working speed: 10mm/s, hydraulic pressure: 315bar, oil volume: 815l, max. oil temperature: 65°C, power: 30kW, max. upper tool weight: 400kg, max. workpiece weight: 13kg. Machine dimensions X/Y/Z: approx. 5500mm/2300mm/3350mm, weight: approx. 22000kg, operating hours: approx. 35000h. Including numerous upper tools, blades and lower tools. Documentation available. On-site inspection is possible. Fedpfx Ahex U Dwpsdopn

Condition: excellent (used), Year of construction: 1997, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 200 mm, side roll diameter: 280 mm, roller length: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 7,250 kg, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, power: 6 kW (8.16 HP), 4 roll plate bender HAEUSLER - VRM-HY MACH-ID 9604 Make: HAEUSLER Type: VRM-HY Control: HAEUSLER CNC Rolling width: 3000mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending: 3mm Top Roll Ø: 200mm Bottom Roll Ø: 280mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 6kW Length: 6000mm Width: 2000mm Fpedpfxey Expue Ahdjn Height: 2000mm Weight: 7250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, sheet width 3100 mm plate thickness 10 mm pre-bending 8 mm Fpodsyv Nhcopfx Ahdjn upper roll diameter 270 mm lower roll diameter 250 mm side roll diameter 210 mm total power requirement 11 kW weight of the machine ca. 7750 kg Overall size 5600x1450x1600 mm

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: V80mm, V65mm/V80mm press brake dies For Trumpf, Bystronic Fpjdpfx Aelkdczohdsn Full body hardened HRC 55

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34368, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 170 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table length: 3,050 mm, table height: 950 mm, throat depth: 400 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, Equipment: CE marking, safety light barrier, Hydraulic press brake LVD PPEC-5 170/30 Touch Fpjdpfxszl Uche Ahdjn Year of manufacture: 2008 Serial number: 34638 Technical specifications Force: 1700kN Working length: 3050mm Distance between uprights: 2600mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Table width: 150mm Approach speed: 100mm/s Working speed: 10mm/s Return speed: 100mm/s Weight: 11000 kg Motor: 15kW COMMAND CONTROL CNC TOUCH LITE CNC 5 axes Y1 Y2 X R V • Table V-axis PP8170 • Reach of X-axis: 600mm • CE marking “PP3580” • Top tool clamping Eurostyle, 15 pcs • Back gauge X-R duo PP8098 • 2 front supports • 2 fingers on back gauge

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Fsdpeyzc Iasfx Ahdjpn Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min back stop - adjustable max. 1.000 mm Control SIEMENS Number of downholders 13 Stk. oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear * Design: "Circuit-guided" Fsdpfx Ahszkvx Uedspn - NC electro-motorized backgauge * with SIEMENS NC control unit "OP 7" * Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL)

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 32231, control type: CNC control, sheet thickness (max.): 6 mm, LVD MVS 6/4050 Guillotine Shear / Sheet Metal Shear – Year of Manufacture 2008 Fpodpfx Ahsywpkaodon For sale is a robust and reliable guillotine shear from the renowned manufacturer LVD. Technical Data: Manufacturer: LVD Company n.v. Model: MVS 6/4050 Year of Manufacture: 05/2008 Maximum Cutting/Pressing Force: 197 kN Max. Sheet Thickness / Capacity: approx. 6 mm (typical for the model, depending on material) Working Length: approx. 4050 mm Max. Force: 10,000 daN Connection: 400 V / 50 Hz Power: 10.1 kW Description: The machine is in good used condition and is fully functional. It is ideally suited for precise cutting operations in steel and metal construction as well as industrial sheet metal processing. Its solid construction ensures high cutting quality and long service life. Features / Highlights: Industrial design High cutting accuracy Easy to maintain Proven LVD quality Fields of Application: Metal construction Sheet metal processing Workshops & production Viewing by appointment. The machine is currently inbound from England. Export, import, and transport can be arranged by us for an additional fee.

Year of construction: 1996, condition: good (used), machine/vehicle number: 9605075, Offer 22537 Technical data: - max. working width 4040 mm - max. cutting capacity St 40 6 mm - Cutting angle, hydraulically adjustable 0.5 - 3° Fsdpfxjimq A Ie Ahdjpn - Cutting gap adjustment, hydraulic - Number of hydraulic clamping cylinders 22 pcs - Motorized backstop with positioning control 10 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 15 strokes/min - Hydraulic drive 400 V / 7.5 kW - Pneumatic connection 6 bar - Table height 770 mm - Space requirement approx. W 5100 x H 2250 x D 2150 mm - Weight approx. 9000 kg - includes: - Electronic foot switch - Cutting line illumination - Sheet metal lifting system, pneumatically assisted