Extraction

LOSMA Darwin 1200

Year of construction: 2022, operating hours: 0 h, condition: new, Mobile cleaning centrifuge including buffer storage for dirty water, agitator and double membrane compressed air pump. - new machine - numerous other variants and special designs on request Machine type: Process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: vibratory finishing technology, general solid-liquid separation, cooling lubricant processing, wet blasting systems, ... Benefits: - High discharge through acceleration forces acting in the system of over 1800 times the acceleration of gravity - Management of the process water in a circuit, which minimizes operating costs and protects the environment - Saving of expensive additives for the vibratory grinding process (compound) - Economical and efficient separation of solid particles from a mixture - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70 ° C (optional cooling available) - frequency-controlled motor drive for smooth acceleration and braking of the rotor Njdpfx Afof Sqfqo Sslk Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the field of vibratory grinding, drying and process water technology, which are precisely tailored to your application. From development to production: We deliver all of our products from a single source and everything is "Made in Germany". ----- Please just contact us, we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: like new (used), machine/vehicle number: DCMS, Year of construction: 2007, Demag manulift chain hoist lifting capacity : 125 kg Lifting height : 2.8m reeving : 1/1 lifting speed : stepless 0.15 - 30m/min version: equipped with suspension eye used in very good condition (fully checked) (new price € 3353,-) multiple DCMS hoists available Nodog Stp Hopfx Af Sslk

Condition: new, Year of construction: 2025, Model 2025 for Industry 4.0! Laser marking system for: =ᐳ Marking =ᐳ Tempering metals =ᐳ Marking many materials =ᐳ Deep engraving Extremely detailed and high-contrast engravings using the JPT-MOPA system fiber laser source (variable pulse width on request) Easy to operate and handle! Nlsdped Athmofx Af Ssk Our exclusive XL laser marking system is characterized by: • Professional fiber laser source JPT MOPAfix 20 or 30W power • 1064nm, 20-400 kHz (for perfect engravings) • Scanner unit "New Generation ECO" • 19" PC control, no external card! • Very large viewing window with certified laser safety glass • Scanning area approx. 150 x 150 mm • Electric height adjustment • Full enclosure with 4 rollers • "weightless" lifting door for safe marking. EZCAD III software: • Barcode and QR code support • Serial number function • Batch scanning from Excel file • Laser parameter finder via matrix using 2 parameters • TCP IP connectivity for external components • Industry 4.0 the status can be processed at any time via the TCP/IP protocol. • Input and output Outputs for direct communication • New look and feel and fresh design • Even clearer and more intuitive operation • 3D preview for rotary axis processing • Performance increase of up to 50% thanks to 64Bit • Improved stability thanks to integrated control card • Optional control of up to 4 axes (integrated) • Optional DEEP engraving with Z-axis • More powerful algorithms for fast hatching. • Completely redesigned Galvo generation • 2-way laser pointer for checking the focus position. • LED lighting of the marking area • Connection option for external extraction • Start button and EMERGENCY STOP on the housing • USB and network connection for data access • Operating instructions and operating software in German • Protective housing in accordance with laser class 1 • Including 4 hours of training in our training center (max. 2 people) Do you need individuality? Of course. Choose from our wide range of accessories: =ᐳ Camera systems for object recognition =ᐳ Fiber laser source in almost all variations =ᐳ Motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for assembly =ᐳ Conveyor belts for infeed and outfeed =ᐳ 3D marking and ENGRAVING function =ᐳ Automatic focus adjustment =ᐳ Rotating unit =ᐳ Motorized slides =ᐳ Interlock system for labeling WITHOUT protective housing, but only with PPE (personal protective equipment) for bulky parts Our engraving lasers naturally allow for individual requests in terms of design and size! =ᐳ Made in Schweinfurt! Images may contain options! Laser engraving machine, laser marker, laser marking, laser labeling, laser engraving, laser engraver, laser marking, laser marking, laser engraver, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, laser marking system, labeling laser, marking laser Laser engraving machine, laser marker, laser marking, laser labeling, laser engraving, laser engraver, laser marking, laser marking, laser engraver, laser marking, laser marking, laser engraver, laser engraving, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, laser marking system, labeling laser, marking laser, marking hero

Condition: good (used), Year of construction: 2018, functionality: fully functional, total width: 800 mm, total length: 1,500 mm, total height: 2,000 mm, overall weight: 300 kg, ZOLLER SMILE 420 X00940 tool presetter - Operating voltage: 200 - 240 V - Frequency: 50/60 Hz - Power: 600 VA - Operating pressure: 6 - 8 bar - Adapter for SK toolholders Attention: The item must be collected definitively between 19 and 23 January 2026 on a date still to be agreed. FCA D-76571 Gaggenau – loaded onto truck Nledpfxoxw Shle Af Ssk

Year of construction: 2021, condition: like new (used), Coolant system / belt filter system 980L Nsdpfxjv Hcyne Af Solk Manufacturer: Bürener Maschinenfabrik Condition: new Equipment: 40 bar high-pressure pump + 2 additional pumps for chip flushing, double changeover filter for fine filtration

Condition: like new (used), Year of construction: 2021, operating hours: 37 h, functionality: fully functional, machine/vehicle number: 21001926, overall weight: 1,110 kg, total width: 1,510 mm, total length: 2,060 mm, total height: 3,000 mm, noise level: 71 dB, filter area: 76 m², Equipment: type plate available, Filter tower for oil and emulsion mist extraction and filtration for local ventilation. Modular system with permanent filter cartridges and two integrated, sound-insulated EC fans, adjustable via ESTA EasyControl, for installation in the work area. Application: Oil and emulsion mist extraction The unit has only 37 operating hours and is therefore as new Nodpoww Itmsfx Af Sslk Original net price: €24,000 Sale only for self-collection and without warranty

Condition: new, Year of construction: 2025, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction Nlsdpfxjfz D Hie Af Ssk - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Year of construction: 2023, condition: ready for operation (used), General Data Machine weight 175 kg Nsdjx E Efpopfx Af Sjlk This Zoller Smile 420 was manufactured in 2023. It features image processing technology with a Z-axis length of 400 mm and an X-axis radius of 200 mm. The machine supports a maximum diameter of Ø400 mm and requires a compressed air pressure of 4–6 bar. Ideal for precise optical measurements, consider the opportunity to buy this Zoller Smile 420 optical measurement machine. Contact us for more information about this machine. Application Types Measuring