Complete clamping for KM 350

KraussMaffei KM 350

Condition: used, Year of construction: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350/1900 C2 Year of Manufacture: 2005 Clamping Force: 3,500 kN Mold Opening Force: 220 kN Moving Platen Drive Force: open: 105 kN close: 95 kN Mounting Plate (H x V): 1,060 x 1,095 mm Fjdpfjxu Uvaex Ad Iegk Clear Span (H x V): 710 x 710 mm Mold Opening Stroke: 920 mm Minimum Mold Height: 380 mm Opening Width: 1,300 mm Ejector Stroke: 250 mm Ejector Force forward/backward: 95 / 48 kN Pump Motor: 75 kW Installed Heating Capacity: 30 kW Barrel Heating Zones: 6 Dry Cycle Rate: 1,550 1/h Oil Capacity: 720 ltr. Dimensions and Weight: Net Weight with Control Cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Max. Mold Weight: 4,780 kg Injection Unit: Shot Capacity: 1900 Screw Diameter: 70 mm Injection Pressure: 1,778 bar Stroke Volume: 1,047 cm3 Shot Weight for PS: 953 g Injection Flow Rate: 527 cm3/s Screw Speed Standard / Option: 285/349 rpm Screw Speed Standard or Level 1: 95 PS Screw Speed Option or Level 2: 117 PS Nozzle Contact Force: 82 kN Fully Hydraulic 2-Platen Clamping System PV Control for Injection Unit MC4 32-bit Microprocessor Control Integrated Operator Panel with TFT Color Display and 3.5-inch Floppy Disk Drive for Data Backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with shut-off valve and open nozzle Nozzle Radius: 15.00 mm Nozzle Bore: 6.00 mm 101225

Condition: used, mileage: 59,000 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, overall weight: 7,490 kg, first registration: 03/2015, loading space length: 5,100 mm, loading space width: 2,480 mm, loading space height: 2,400 mm, emission class: euro5, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, had accident, tail-lift, * Driver airbag * LBW BEAR 1000kg * Steering wheel adjustment * 80% tires * Engine brake * Roof spoiler * Payload 3400kg Fodehwbbhepfx Ad Isgk * Automatic transmission has problems!!! * WhatsApp/Tel.

Condition: excellent (used), Year of construction: 2004, Krauss Maffei Injection Moulding Machine KM 350-2700 C2+ Year of manufacture: 2004 System: Fully hydraulic Control: MC4, color monitor, integrated control panel, built-in disk drive 2. Plasticizing Unit Fsdpjx Elukofx Ad Iegk Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 3500 kN Mold opening force: 220 kN Moving platen force: Opening: 105 kN Closing: 95 kN Platen dimensions (h × v): 1060 × 1095 mm Tie bar clearance (h × v): 710 × 710 mm Mold opening stroke: 920 mm Mold height: 380 mm Daylight: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Injection volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Standard throughput: 108 g/s Increased throughput: 141 g/s Electro-hydraulic Equipment Pump motor power: 75 kW Installed heater power: 36 kW Number of barrel heating zones: 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and Weight Net weight (with control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Year of construction: 1999, condition: ready for operation (used), A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible. Fjdpfjxx Uf Aex Ad Iegk

Condition: used, Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit, double hydraulic pump -Double hydraulic pump: from injection molding machine KHS Krauss Maffei KM 1000-5000A -Pump 1: Voith type IPH 6/5-125/50 300 bar Fgjdpfx Adeg Avqcj Iek - Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher type? -Individual components: filters/valves see photos -Dimensions: 2285/800/H900 mm -Weight: 1132 kg

Condition: good (used), Year of construction: 2006, Krauss Maffei injection molding machine KM 350 - 2700 C2 Year of construction : 2006 Control : MC 4 Technical details Clamping unit : Closing force : 3500 kN Mold opening force, max: 220 kN Moving force of moving plate Opening: 105 kN Moving force of moving plate Closing: 95 kN Size of mold plates (h x v): 1060 mm x 1095 mm Distance between columns (h x v): 710 mm x 710 mm Mold opening stroke: 920 mm Mold height min: 380 mm Max daylight: 1300 mm Hydraulic ejector - stroke: 250 mm Forward/reverse ejector force: 95 / 48 kN Injection unit Auger diameter: 80 mm Ls/D ratio: 20 Injection pressure: 1829 bar Displacement volume: 1433 ccm Injection weight, PS: 1304 g Injection speed: 513 ccm/s Screw speed: 218 1/min Maximum plasticization rate: 108 g/s Nozzle pressure: 173 kN Electrical and hydraulic equipment Nominal pump motor capacity: 75 kW Installed heating power: 36 kW Adjustable barrel heating zones: 7 Tank capacity: 720 ltr. Dimensions and weight Machine dimensions: 6.91 m x 2.20 m x 2.41 m Total weight of the machine: 15300 kg Maximum mold weight: 4780 kg Fgjdpfx Ademki Iuj Iok

Condition: used, Year of construction: 2019, pressure:100 t stroke:1000 mm table surface area:1045 x 1045 mm table extendable:800 mm table speed:50 mm/sec dimensions:ca. 2550 x 2850 x 3620 mm height over floor:600 mm diameter of piston:76 mm ram diameter:110 mm Fodpfx Ajffamxod Iegk ram hole:40 H7 Cylinder:300 mm total power requirement:5,5 kW pump capacity:24,9 Lt./min Pressure power:250 bar :200 l daylight opening:1600 mm daylight:1200 mm weight of the machine ca.:6,6 t hollow:180 mm hollow:400 mm :1000 kg :1 - 10 mm/sec work stroke:3 mm/sec :1 - 25 mm/sec :33 mm/sec

Year of construction: 2023, condition: new, With bolted,welded and horizontal types, silos are used in storing cement,fly ash,bentonite and other bulk materials. Welded Silos Welded silos are preferred in low capacities of storage, it can be assembled and operated in 2 hours with one crane. It is preferred in local solutions where transportation costs can be neglected. Semix is able to manufacture welded silos in a range between 50 to 150 tons. Bolted Silos Fjdpfegau Uqjx Ad Iegk Bolted silos are preferred due to its' compactness for transportation. It can be transported with containers for avoiding freight costs. Because of its modularity, Semix is able to manufacture welded silos in a range between 100 to 2000 tons. Semix provides a mechanical supervisor for assembling the bolted silo correctly. Semix have succeed to install bolted silos in Peru, Israel, Germany and United Kingdom.

Condition: excellent (used), CATALOG NUMBER 7513 Technical specifications: - Max main saw blade diameter – without scoring unit: 400 mm - max cutting height: 120 mm - Max main saw blade diameter – with scoring unit: 300 mm - max cutting height: 70 mm - Blade bore diameter: 30 mm - Scoring spindle saw blade diameter: 100 mm - Scoring spindle end diameter: 20 mm - Main blade adjustable up/down - Blade guard - Spindle lock - Sliding table length: 2600 mm - Cutting width at fence: 900 mm - With side table - Main motor power: 5.5 kW – Scoring spindle motor power: 0.75 kW - 2 rotation speeds - Table dimensions: 1200 x 700 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 2600 x 3300 x 1100 mm - Weight: 790 kg Fgsdpfxevfp Iij Ad Isk ADVANTAGES – German manufacture – Used saw, in very good condition Net price: 9500 PLN Net price: 2260 EUR (depending on exchange rate 4.2 EUR) (Prices may change with greater fluctuations)

Condition: used, Year of construction: 1985, with großer cut length 3500 mmused, good conditionmanufactured by Mayertype FSKbuilt in 1985 or 2,2 kWcut length 3500 mmsaw blade diameter ca. 180 mmpneumatic clampingrip fence with hand wheel adjustablefront extented tablerear extented tableveneer strip fence with stop fingerexhaust ductpneumatic service unitexhaust connection D 100 mmrequired space ca. l x w x h mm4400 x 1200 x 1300weight ca. 600 kgtotal connected power ca. 2,2 kWlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Fgsdpovwf Uvefx Ad Iek