Recoiler - mandrel 0,5 t

KEMMERICH

Condition: excellent (used), Year of construction: 1999, Coil weight: 150kg Strip witdh: max. 100mm Klslhsh T Ducocdwvsr Outer diameter: max. 1.200mm Inner diameter: 320 ... 520mm Performance • decoiler fixed on moveable frame • Disc on back side and ring on front side for lateral coil keeping • manual adjustable brake

Condition: used, Winding and unwinding reel KEMMERICH / STANGE type HA 1500 / 500 Serial no. 51673 Year of construction 2023 (unused) Coil weight max. 1500 kg Coil width with start-up arms 500 mm Coil width without start-up arms 670 mm Coil inner diameter 300 - 370 mm Coil inner diameter with top jaws approx. 380 - 440 mm Coil start ring Ø 2080 mm Coil outer diameter without pressure arm max. 2350 mm Coil outer diameter with pressure arm max. 2200 mm Center of reel crown to reel foot 1200 mm Reel shaft, support shaft Ø 70 mm Kjlhceua Nngedwvjlr Speed approx. 1.5 to 20 rpm Motor power 1.1 kW Mains connection 400 Volt, 50 Hz - Infinitely variable reel speed via frequency converter - loop switch / proximity switch for reel STOP - Central spreading via hand crank - clockwise and counter-clockwise rotation - Pneumatic pressure arm with roller - 4 start-up arms 870 mm - 4 plastic top jaws for the reel crown for adjustment Space requirement L x W x H Weight 970 kg Very good condition

Condition: good (used), Year of construction: 1992, KEMMERICH V 300 AE reel - max. load: 300 kg - V: 50 Hz Kelhovbwk Rjcdwvelr Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection: Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: excellent (used), Year of construction: 2007, Press force: 2,000 kN Table surface: 2,300 x 1,100 mm (W x D) Through-hole openings: 2 x 700 x 300 mm Distance between Columns: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Side clearance: 740 mm Installation height: 550 mm (lower stroke, upper adjustment) Stroke rate: 30 - 140 rpm, continuously adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Design: • Siemens + Beckhoff control system • 8-way sliding guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram weight compensation • Electric motorized stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, 300 mm spacing) • Vibration-damping machine feet • 4 tool locks + 4 cam outputs • Ram with 20 mm wide center groove • Hydraulic tool clamps on the table and ram • Hydraulic roll blocks for tool changes Kemmerich strip processing system, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Strip width: 100 - 600 mm Spreading range: 470 - 520 mm Coil – outer diameter 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic spreading via sliding wedges • Rear support disc and 3 attachable limit arms at the front • Hydraulically operated and driven pressure roller, laterally adjustable via handwheel • Loading chair (stationary, reel moves hydraulically), lifting height 770 mm with 4 limit bars Straightening Machine Type: RMBMZ 50.600 UF Strip Width: 40 - 600 mm Strip Thickness: 0.5 - 4.0 mm Straightenable Cross Section: 1,200 mm² Number of Rollers: 9 Diameter of Straightening Rollers: 50 mm Kelov T Anlshcdwvslr Number of Pulling Rollers: 2 Diameter of Pulling Rollers: 100 mm Speed: 3 - 25 m/min Design: • Rollers hardened, ground, and hard-chrome-plated • Lower straightening rollers and feed rollers driven by gears • Motorized adjustment of the roller frame via motors, adjustment accuracy 1/100 mm, values can be saved • Upper rollers can be lifted by 100 mm • Feed roller can be lifted pneumatically • Lateral strip guidance at the inlet with handwheel and Threaded spindle • Outfeed roller cage and loop bridge • Loop control via ultrasonic transducer • Hydraulically operated insertion aid, consisting of a table with an extendable tongue and an upper bending roller Roller feed Strip width: max. 600 mm Design: • Hardened, ground, and chrome-plated rollers • Driven by gear motor • Hydraulically liftable upper roller • Hydraulic height adjustment • Lateral strip guide at the inlet with handwheel • Roller cage Additional design: • Pneumatically pivoting loop bridge between the straightener and feeder • Safety fence around the entire system • Coiler and straightener on a shared base frame • Various replacement rollers for the straightener

Condition: used, Year of construction: 1997, Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Kljlhsuqd Tmscdwvsr Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton Standard configuration The press was converted to CE standard in press was converted to a SIEMENS S7 control conveyor system still has a SIEMENS S5 control system. Extended machine accessories Die lifters in the table Automation Feeding unit KEMMERICH consisting ofDecoiler levelling machine roll feeder Coil loading car