Circular sawing machine

KALTENBACH KKS

Condition: used, Year of construction: 1999, Max. saw blade diameter: 450 mm Continuously adjustable saw blade feed 2 engine speeds Hydraulic material clamp, vertical and horizontal The sawing table can be rotated in both directions via hydraulic motor Coolant pump Positioning unit up to 6400 mm with program input or individual cut Fgedpfx Aszx Uwrsglog Roller conveyor left Light barrier operation manual Only 106 cutting hours

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. Fgodpfx Agjyfgrpjlsg The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: used, Year of construction: 2000, machine/vehicle number: 121528, Item No. 26301 Technical specifications: - Saw blade diameter up to 400 mm - Cutting range with a saw blade diameter of 400 mm - at 90° up to round 130 mm - square 120 mm - flat 305 x 40 mm - or 240 x 85 mm - mitre adjustable, left + right 0 - 90° - at 45° up to round 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Saw blade feed speed - steplessly adjustable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - Hydraulic material clamping device with hand crank for fine adjustment - Steplessly adjustable clamping pressure - 2 hydraulic backstops Fgodezzplispfx Aglsg - Micro-spray coolant system - Original outfeed roller conveyor with stop 4000 mm - Infeed roller conveyor 2000 mm - Space requirement approx. W 900 x H 1800 x D 1050 mm - Weight approx. 950 kg

Condition: refurbished (used), Kaltenbach circular saw completely overhauled. TECHNICAL DESCRIPTION KKS 400 KKS 400 Semi-automatic, hydraulic universal circular saw with rotary table for miter cuts SAW BLADE Segment saw blade Saw blade holder according to DIN 8576 ☒ 400 x 4 ☐ 450 x4 mm 50/4x14/80 mm WORKING AREA Round material 90/45° 125 150 mm Square material 90° 115 140 mm 45° 110 130 mm Flat material 90° 305 x 40 330 x 40 mm 45° 235 x 30 250 x 40 mm U-profiles standing 90/45° 120 x 55 140 x 60 mm lying 90° 240 x 85 280 x 95 mm 45° 180 x 70 220 x 80 mm Cutting lengths from 10 mm DRIVE POWER Saw motor 1.8/2.7 kW Hydraulics 1.5 kW Coolant pump 0.1 KW Fsdsvn Ic Rjpfx Agljgg CUTTING SPEEDS (standard) 11.5/23 13/26 m/min or 10/20 11/22 m/min or 13/26 15/30 m/min SAW BLADE FEED continuously adjustable according to table 0 - 1,000 mm/min Saw blade rapid return 3,300 mm/min ELECTRICAL CONNECTION TN-S system - 3 phases, neutral conductor, earth 400/50 V/Hz WEIGHT Machine without accessories approx. 820 kg

Year of construction: 2008, condition: ready for operation (used), Three small window and profile processing machines are available. 1) Urban WS 103 water hole cutter, year of manufacture: 2008. 2) Urban AKS 1105 single-head automatic welder with new cylinder. 3) Stegmaier AK 84 flat threshold for window frames, year of manufacture: 1984. On-site inspection is possible. Individual sale possible. Fedpfx Aewwvwysglogg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Kaltenbach KKS 450 U metal cutting circular saw (2021) Manufacturer: Kaltenbach Type: KKS 450 U Year of manufacture: 2021 Condition: used, very good Clamping, sawing, retraction, opening – all easily controlled with the push of a button Semi-automatic miter circular saw Working range 150 mm Saw blade diameter up to 450 mm Miter adjustment 180° Adjustment of the cutting height via push button Two cutting speeds Scope of delivery: - Documentation - 2m infeed roller conveyor - 2m outfeed roller conveyor with digital material stop Fgsdpfx Aezwhwvegleg - 2x saw blades

Year of construction: 1998, condition: ready for operation (used), Feed rate: 50-1000 mm/min, operating voltage: 3x 400 V, control voltage: 24 V, rated current: 12 A. On-site viewing is possible. Fjdpjyln A Nsfx Aglogg

Condition: good (used), Year of construction: 2010, Weinig Conturex C126 CNC Window production machine Fsdpfx Agjx Tq I Eeljgg Description; Year of construction: 2010 Working width 40-260mm Working heigth 25-150mm Powergrip clamping table Table loading length single table 4 x 2280mm Workpiece length single table cycle 220-2700mm Table loading length double table (combined) 2 x 4630mm Workpiece length double table cycle without follow up 220-5000mm Workpiece length double table cycle with follow up 5000-6000mm Fully new PC & Software 2025 Full description on request Available approx. summer 2026 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 1991, functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 145 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 700 kg, Semi automatic circular saw, blade Ø 400 mm new, capacity Ø ca. 145 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, vertical clamp, horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device; dimension 85x110x180 cm, weight ca. 700 kgs Fgedpswp Ipxofx Agljg

Condition: reconditioned (used), Year of construction: 2010, For sale: a Kaltenbach cold-cutting circular saw. Gearbox with no backlash! Type: KKS 400 E Year of manufacture: 2010 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fsdpfx Agjzrncujlogg Rapid traverse: 1,550 mm/min Maximum working area: 130 mm Working area for square material: 120 mm Working area for flat material: 305 x 20 mm Working area for round material: 130 mm Minimum working area: 10 x 10 mm Mitre angle range: 0° - 90° - 0° Dimensions (L x W x H): 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection/collection in 89558 Boehmenkirch Shipping possible upon request. Forklift available for loading.

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Fgsdpfx Agsxwaz Helsg

Condition: good (used), Year of construction: 1988, machine/vehicle number: 109884, Offer 26167 Technical data: Fjdpfx Agjzibmbjljgg - Saw blade diameter up to 400 mm - Cutting range at 90°: - Round 130 mm - Square 120 mm - Rectangular 300 x 40 mm - or 240 x 85 mm - Cutting range at 45°: - Round 130 mm - Square 110 mm - Rectangular 245 x 40 mm - Miter adjustable left and right, each 0 - 90° - 2 cutting speeds: 13 + 26 m/min - Drive: 400 V / 1.2 / 1.8 kW - Feed rate of the saw blade, hydraulically continuously adjustable - Vertical material clamping - Coolant system - Space requirement: approx. W 800 x H 1850 x D 1100 mm - Weight: approx. 850 kg - Infeed – roller conveyor with storage area: 4000 mm - Outfeed – roller conveyor with measuring stop: 4000 mm

Condition: good (used), Year of construction: 1974, Offer 26003 Technical Data: - Saw blade diameter: up to 370 mm - Cutting capacity at 90°: - round: 110 mm - square: 100 mm - rectangular: 280 x 40 mm or 240 x 85 mm - Cutting capacity at 45°: - round: 110 mm - square: 100 mm - rectangular: 220 x 40 mm - Mitre adjustment left and right: each 0 - 90° - 2 cutting speeds: 13 + 26 m/min - Drive: 380 V / 1.2 / 1.8 kW - Saw blade feed rate hydraulically, steplessly adjustable Fgjdsy Nlnxjpfx Aglog - Coolant system - Required space approx. W 800 x H 1850 x D 1100 mm - Weight approx. 750 kg

Condition: good (used), Year of construction: 2011, From a company liquidation: Berg und Schmid VKS 370 HA Year of manufacture 2011 Semi-automatic machine 4-meter roller conveyor left + right Left stop with digital length measuring system, adjustable via handwheel Cutting capacity with a 370mm saw blade: Round 120mm - Square 100mm - Rectangle 180x100mm at 90° at 60°: Round 110mm - Square 90mm - Rectangle 90x100mm Miter cuts left up to 60° - right up to 45° Saw blade mount 40mm Saw blade speed 15-70 rpm 380 volts Coolant pump Semi-automatic function: 1. Clamp the material 2. Saw starts 3. Lower at rapid traverse to the beginning of the material or cut immediately for serial cutting Fgjdpfxewa Ecqs Aglsg 4. Remove the saw blade 5. Raise the frame until just above the material 6. Open the clamping jaw

Condition: good (used), Year of construction: 1995, machine/vehicle number: 117848, Offer 26171 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90°: - Round 130 mm - Square 120 mm - Rectangular 300 x 40 mm - Or 240 x 85 mm - Cutting range at 45°: - Round 130 mm - Square 110 mm - Rectangular 245 x 40 mm - Miter adjustable left and right, each 0 - 90° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.8 / 2.7 kW Fgedpfxszibdgj Aglog - Feed rate of the saw blade, hydraulically steplessly adjustable - Vertical hydraulic metal clamping device + 2 hydraulic horizontal metal clamping devices - Coolant system - Infeed – roller conveyor with storage area 5000 mm - Outfeed – roller conveyor with measuring stop and positioning control 4000 mm - Space required approx. W 900 x H 1950 x D 1200 mm - Weight approx. 850 kg