High precision flat grinder

JUNG JF 520 / 525 SPM-X

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Lhjdpfx Ajh Ha Ipjf Ser Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: excellent (used), Hello, we offer used Erowa PalletSetW vices. Lsdjitcq Tepfx Af Sohr They have been cleaned and checked by us. ER-025895 Vice PalletSet W 40mm ER-054922 flat vise 8mm PalletSet W ER-055774 Vice 0-170mm In addition, a functional test was carried out. The vices have slight signs of wear and are technically in very good condition. Individual purchase also possible. Spare parts are also available Do you have any questions? Then we are at your disposal.

Condition: good (used), Shrink tunnel from a German manufacturer: -Tunnel opening approximately 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m / min. -Choice of fixed or co-rotating tunnel bars. Lhjdpfxjh U A I Rj Af Ssr -By means of deflectors, the hot air streams at the top and in the middle can be adjusted separately. -Bottom air can be switched on separately. -The machine can be pushed or fixed in place by means of lockable castors.

Condition: used, Year of construction: 1996, grinding length 600 mm grinding width 250 mm workpiece height ca. 385 mm table surface area 600 x 200 mm table speed -stepless- 2 - 35 m/min table load capacity max. 250 kg grinding wheel size ø 225 x 25 mm grinding wheel hole diameter 50,8 mm vertical feed autom. 0,001 - 0,099 mm rapid traverse vertical 600 mm/min cross feed of table continual 10 - 1000 mm/min rapid traverse cross 1000 mm/min total power requirement 6 kVA dimensions of machine L x W x H 2,65 x 1,70 x 2,28 m Accessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, Lsdpfxet Tqrns Af Sjhr grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filter

Condition: new, Optimum OPTImill MZ 2S tool milling machine With digital 3-axis position display DP 700 from NEWALL. With inverter drive of the feed axes controllable from the control panel. Versatile application range Excellent damping characteristics and stability of the machine frame All guideways hardened and precision ground and adjustable by means of taper bars Automatic feed in X, Y and Z axes, infinitely adjustable via an electronic joystick on the control panel Electric feed limit stop Ball screw in all axes Central and clearly arranged control panel with integrated digital position and speed display Massive cross table, large dimensioned and precisely surface machined with 5 T-slots Coolant device Large dimensioned handwheels with scale Machine lamp Quiet running Manual central lubrication TECHNICAL DATA Dimensions and weights Length (product) approx. 1239mm width/depth (product) approx. 1168mm Height (product) approx. 1900mm weight (net) approx. 1400kg Drilling-milling head milling head swivel range ± 90 Drilling-milling capacity cutter head size max. 100mm drilling capacity steel (S235JR) 30mm Continuous drilling capacity steel (S235JR) 26mm End mill size max. 25mm Electrical data Power drive motor 2,2kW Supply voltage 400V Mains frequency 50Hz Horizontal milling table Ledpjfnh Sgofx Af Sshr Horizontal milling table length 750mm Horizontal milling table width 320mm distance vertical spindle - horizontal milling table min. 75mm distance vertical spindle - horizontal milling table max. 410mm Horizontal milling table T-slots size 14mm Horizontal milling table T-slots number 5 Horizontal milling table T-slots distance 63mm Distance horizontal spindle - horizontal milling table min. 70mm Distance horizontal spindle - horizontal milling table max. 400mm Horizontal milling table load max. 285kg Milling table vertical Vertical milling table length 830mm Vertical milling table width 250mm Vertical milling table T-slots size 14mm Vertical milling table T-slots number 2 Vertical milling table T-slots distance 63mm Coolant system Coolant pump(s) Drive power 95W Travel Travel X-axis manual 400mm Travel Y-axis manual 200mm travel Z-axis manual 335mm Travel X-axis automatic approx. 310mm Travel Y-axis automaticapprox. 160mm Travel Z-axis automatic 295mm Vertical spindle Vertical spindle throat 100mm Vertical spindle Spindle mounting ISO 40 DIN 2080 Vertical spindle speed range 50 - 1890min¯¹ Vertical spindle number of speed ranges 12steps Vertical spindle tightening rod M 16 Vertical spindle quill stroke 120mm Vertical spindle load max. 1100Nm Feed speed Feed speed X-axis 10 - 600mm/min feed speed Y-axis 10 - 600mm/min feed speed Z-axis 10 - 600mm/min Electrical connection Total connected load 4kW Motor(s) rapid traverse X-axis power drive motor 0,375kW rapid traverse Y-axis power drive motor 0,375kW Rapid traverse Z-axis power drive motor 0.375kW SCOPE OF SUPPLY: Adapter ISO 40/MK3 adapter MK1 and MK 2 Milling spindle horizontal milling Ø 27 mm Operating tool

Condition: new, The RSM 500 A, a powerful Conventional Cylindrical Grinder from KNUTH, is built to deliver exceptional grinding performance with its robust design and excellent rigidity. Featuring a premium cast-iron machine frame, this grinder ensures optimal conditions for achieving superior grinding results. The machine is equipped with finely adjustable hydraulic feeds that operate smoothly in the longitudinal direction, and a swiveling table allows for precise taper grinding. With a maximum grinding diameter of 200 mm and a grinding length of 500 mm, it caters to a variety of applications. The headstock can rotate 180 degrees for internal grinding, while the hydraulic tailstock, with foot switch operation, enhances efficiency during setup and workpiece exchanges. Standard equipment includes a 2-axis position indicator, internal grinding equipment, and a comprehensive accessory package. Invest in reliability and precision for your grinding needs—request a quote for the RSM 500 A today, a leading choice in the Conventional Cylindrical Grinder category within the Grinding Machines sector. Lhodpfx Ajncdx Nef Ser

Condition: used, max. grinding length: 300 mm max. grinding width: 150 mm Lhodpfjr Nyatox Af Ser table movement - longitudinal: 2 - 20 m/min grinding plate rotations: 3000 Upm electrical connection: 380 V, 1,1 kW space needed: 1500 x 1100 x 1750 mm weight: 920 kg

Condition: new, The Meisterturn 400 V is a state-of-the-art conventional horizontal lathe designed for precision machining in the realm of engine lathes. This machine ensures high accuracy in single parts and small batch production, making it ideal for tool and mold construction, as well as training applications. Equipped with features like an infinitely variable spindle speed reaching up to 2,500 rpm and an integrated constant cutting speed function, the Meisterturn provides optimal performance during face turning, comparable to CNC capabilities. Its robust design includes a heavy cast-iron bed with dual v-guides, a high-capacity spindle for efficient clamping, and safety features such as electromagnetic brakes and an enclosed oil bath for gears. With an ergonomic machine enclosure, user-friendly control panel, and an extensive equipment package including a 3-jaw chuck and cooling system, the Meisterturn is perfectly tailored for demanding production environments. You can request a quote for this exceptional engine lathe today. Ledpfxeqzhhlo Af Sshr

Condition: new, Year of construction: 2025, Through our many years of experience in service, we have decided to develop and produce our own milling machines. The FPS 500M is a conventional milling machine perfect for training and production. Through the Heidenhain Positip 8016 active digital display positioning and for example the creation and approach of a bolt hole circle is possible. Control Heidenhain Positip 8016 Active - Digital display Speed 0 - 3000 rpm geometrically stepped direct gear with 16 gear steps for maximum torque / milling power Feed rate 0 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill extendable quill, vertical 80 mm SK40 optional: horizontal work spindle or horizontal quill (approx. 100mm extendable) Pulling system: hydraulic tightening system - DIN 69872 optional: DIN 2080 Lhsdpfxoh Su Ipo Af Ser Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x480mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. - Travelling chip tray - Machine light - Central lubrication - Z-axis bellows Options - universal table - rotary table - Shaper head - dividing head - counterholder - etc. Further technical data can be found in the attached data sheet.

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm Ljdpfx Afovuuaij Sjhr passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation