Surface grinding machine

Jones & Shipman 1400X

Condition: used, TECHNICAL DETAILS - center height : 100 [mm] - Distance between centers : 650 [mm] - Max. table orientation : [°] - Travel : 650 [mm] - Speed : 100 - 3500 [mm/min] GRINDING WHEEL HOLDER HEADSTOCK - Orientation : [°] - T1 grinding wheel dimensions : 350 x 32 x 127 [mm] - Power : 3 [kW] - Speed : 1600 - 2200 [rpm] - Peripheral speed : [m/s] PART-HOLDER HEADSTOCK - Spindle speeds : - 1200 [rpm] - Power : 0.5 [kW] - Type of cone : CM4 - Max. part weight : 20 [kg] - Orientation : 0 - 90 [°] POWER SUPPLY - Supply voltage : 400 [V] - Power : 8 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 00 x 00 [mm] - Machine height : 1650 [mm] - Machine weight : 1900 [kg] Iodpoyn R I Hefx Ah Ujig MACHINE HOURS - Number of hours under power : 01 [h] EQUIPMENT - Sony LG20-2 display - Automatic contact detection : SENSITRON 6 - 1 tailstock with fine adjustment - 1 internal grinding spindle - Fixed dressing device - Coolant tank - 1 three-key steady rest

Year of construction: 2015, condition: used, workpiece diameter 300 mm workpiece weight 999 kg workpiece height 145 mm Features: -Digital display vertical axis -Automatic feed -Programmable automatic end stop -Grinding spindle drive with infinitely variable electronic speed control -Infinitely variable cross feed and table rotation -24V magnetic clamping plate 300 mm -Various occupational safety devices, e.g. protective cover monitoring, operating status display via traffic light -Lubricating oil level monitoring -The machine was completely overhauled in 2015, at which time the entire electrical system was replaced with PLC control and 24V control voltage -Paper belt filter system specially designed for this machine Iijdpfx Asxflcljh Usg The following work has now been carried out: -Replacement of bellows and belts -New bearings for grinding spindle -Grinding carriage bed and rotary table bed scraped by hand to restore better and more precise running characteristics -Grinding carriage and cross table lifted from machine body and all tracks cleaned, lubrication checked -Various wear parts, such as rubber caps and switching elements, replaced -Detailed functional check -Modernisation of feed arm -Paint touch-up work, machine colour: light grey RAL 7035 and RAL 7012

Condition: good (used), machine/vehicle number: 115 240, center height: 250 mm, grinding length: 1,000 mm, grinding diameter: 500 mm, a very well-maintained used external cylindrical grinding machine with internal grinding capability, SCHAUDT, Type: A 510 N 1000. Iisdszz Tkcepfx Ah Uog Center height: 250 mm, grinding diameter: 500 mm, grinding length: 1000 mm, with multiple grinding wheels.

Condition: used, TECHNICAL DETAILS - Distance between centers : 600 [mm] - center height : 125 [mm] - Table orientation : 11 [°] GRINDING WHEEL HOLDER HEADSTOCK - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 [rpm] - Orientation of grinding wheel holder headstock : 270 [°] PART-HOLDER HEADSTOCK - Orientation of part holder headstock : 360 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Power : 0.9 [kW] TAILSTOCK Iisdpfxszf Rcde Ah Ujg - Internal cone : MT4 - Quill stroke : 30 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2580 x 1680 [mm] - Machine height : 1670 [mm] - Machine weight : 2200 [kg] EQUIPMENT - Coolant tank * with paper filtering unit - 1 internal grinding spindle - Lubricating tank with pump - 1 three-key steady rest - 1 inner spindle alignment device

Condition: good (used), Distance between centers: 760 mm Maximum travel on the Z axis: 650 mm Maximum grinding length: 430 mm Maximum grinding diameter: 250 mm Height of centers: 125 mm Maximum grinding wheel diameter: 500 mm Maximum travel on the X axis: 320 mm CNC brand: FANUC CNC model: 18TB Isdpfx Ahjv Tmtle Ujig Main motor power: 7.5 kW Z and X axis resolution: 0.1 µmm Workhead taper: MORSE 5 Workhead hole diameter: 38 mm Tailstock taper: MORSE 4 Workhead rotation speed: 8 to 800 rpm Dimensions (length x width): 2500 x 2000 mm Weight: 4700 kg

Condition: good (used), PROTH PSGS-3060AH surface grinder Grinding surface: 300 × 600 mm Iiodpfszxg Uvox Ah Ueg Cross travel × longitudinal travel: 340 × 700 mm Spindle center height above the table: approx. 500 mm Table longitudinal feed rate: 1 to 25 m/min Standard grinding wheel: Ø355 × 25 × Ø127 mm Spindle speed: 1,500 / 1,800 rpm at 50/60 Hz Spindle motor: 2.2 kW / 3 HP Net weight: approx. 1,650 kg Dimensions of packaged machine: approx. 2.28 × 1.74 × 2.06 m

Condition: used, JONES AND SHIPMAN EIT 1076 PRODUCTION CYLINDRICAL GRINDING MACHINE Isdpfx Aszw U Twjh Ueig MADE IN ENGLAND CAPACITY: 250 x 700.0mm DROP DOWN INTERNAL SPINDLE VARIABLE SPEED HEAD METRIC DIALS UNIVERSAL BED PAPER FILTRATION SYSTEM AUTO CYCLE

Condition: used, Parallel Lathe SCULFORT MAXICAP type 315-3000 R Between points: 3000 mm Maxi Ø on bench: Ø 635 mm Maxi Ø over saddle: Ø 470 mm Maxi diameter in brocken bed: Ø 1000 mm x Width 200 mm Spindle motor: 13 CV Isdpfx Aezwgp Doh Usig Spindle diameter: Ø 71 mm Rotation: from 20 to 1300 RPM Square turret GOODSHAPE 3-jaws chuck Ø 380 mm Threadings: Metric + Whitworth Tailstock: CM5 Feeds: longitudinal + transversal auto advances Equipped with: 1 lubricant pump + 1 face plate Ø 1000 mm Equipped with: 2 fixed steadies: Ø 380 mm + Ø 1000 mm Voltage: 380 V Dimensions (L x W x H): 5200 x 1600 x 1700 mm Weight: approx 5 T

Condition: used, Year of construction: 1976, Surface grinding machine Manufacturer: Elb Type: ELB Schliff SW 07 Isdpjzt U Nqjfx Ah Ujig Year of manufacture: 1976 Travel range X-axis: 700 mm Travel range Y-axis: 350 mm Travel range Z-axis: 350 mm Weight: approx. 3,000 kg 13826

Condition: excellent (used), Year of construction: 1996, JUNG JF 600 Surface Grinding Machine Jung JF 600 Year of manufacture 1996 Overhauled in 2018 Excellent CONDITION The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 1993 / 2018 Table length: 600 mm Table width: 250 mm Axis movement: Longitudinal travel (X-axis): 600 mm Cross travel (Z-axis): 280 mm Maximum distance between table and spindle center: 500 mm Grinding length: 600 mm Table speed: Continuously adjustable from: 1 m/min to: 24 m/min Creep feed: from: 0.03 m/min to: 0.40 m/min Automatic cross feed: Continuously adjustable from: 0.010 mm/min to: 10000 mm/min Connection: 50 Hz 3x 380 Volt Grinding spindle motor: 9.5 kW Isdpfxoyxdalo Ah Ujig Total power requirement: 13 kVA Machine weight approx.: 2500 kg Machine dimensions: Length: 2910 mm Width: 2320 mm Height: 1840 mm Additional equipment: Coolant system About the machine: For sale is a Jung JF 600 surface grinding machine. This universal surface grinder is in very good original condition. It comes from a facility where it was only occasionally used for training purposes. The control system is very user-friendly. A grinding travel of 600 mm on the longitudinal axis and a cross travel of 300 mm make this machine ideal for toolmaking, jig and fixture construction, and small batch production. This model series is characterized by extensive standard equipment and ease of use. The robust spindle head design and the double V guideways in both the longitudinal and cross axes guarantee long-term precision. The intuitive controls make operation easy and significantly increase productivity. The guideways are regularly lubricated via central lubrication. The Jung has been mechanically and electrically checked by us. Take advantage of the opportunity to view and test the Jung on site under power. Further surface grinders from well-known manufacturers can be found on our website.