Vertical machining center

JOHNFORD VMC-1300

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE EV SERIES MACHINE Ledpfx Apsxp Na Njhort ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL GOOD SLIDES

Condition: good (used), Year of construction: 1990, 4-Axis Machining Centre Table dimensions 1200 x 660 mm Travel paths X 1050 mm, Y 650 mm, Z 660 mm Max. table load 1600 kg Feed speeds 15000 mm/min. Tol magazine with 31 tool places, partly equipped with BT 50 tool holders. 4th axis (controlled) NIKKEN CNC 250, clamping chuck diameter 250 mm Dimensions in mm: about 3000 x 5000 x 2900 Lrsdpofbml Nsfx Aphot Weight in kg: about 13000

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Lrodpfx Aotylpcophot

Condition: used, Year of construction: 1980, turning diameter over bed 1930 mm turning diameter over slide rest 1520 mm turning length 5000 mm turning speeds 0,5-250 U/min spindle bore 105 mm workpiece weight 35 t steady 400-700 mm steady 700-1200 mm steady 1000-1600 mm control Siemens total power requirement 106 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Lrjdsyutp Hepfx Aphet We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 28820005482, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Equipment: documentation/manual, Dear Sir or Madam, Lsdpfx Asvx N Shephert We are selling a DMC 100 V hi-dyn machining center in good condition. Unfortunately, the year of manufacture is not written down, but we suspect it was 2001. Please see the pictures for further details; we are of course happy to answer any questions you may have. The system can be viewed with power on. The buyer must organize collection with a suitable truck. The system can be dismantled and removed by either the buyer or us (for an additional fee of €1,500).

Condition: used, Year of construction: 2003, turning length: 630 mm, turning diameter: 850 mm, spindle bore: 130 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 830 mm, Mori Seiki SL-403B/800 CNC Lathe (2003) Machine Type: CNC Turning Center (2-Axis) Year of Manufacture: 2003 Control System: Mori Seiki MSX-501II Maximum Turning Diameter: approx. 630 mm Maximum Turning Length: approx. 800 mm Distance Between Centers: approx. 850 mm X-Axis Travel: approx. 345 mm Z-Axis Travel: approx. 830 mm Spindle Nose: A2-11 Spindle Bore: approx. 130 mm Lrsdpfxjx Hp Eij Aphet Maximum Bar Capacity: approx. 102 mm Spindle Speed: up to 3,000 rpm Spindle Motor Power: approx. 30 / 37 kW Tool Turret: 12 Stations Tool Size: 25 × 25 mm Machine Weight: approx. 9500 kg Machine Dimensions (L × W × H): approx. 4,200 × 2,000 × 2,100 mm

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 11903, grinding length: 5,200 mm, grinding wheel diameter: 660 mm, grinding diameter: 1,600 mm, grinding wheel width: 50 mm, spindle speed (max.): 30 rpm, spindle speed (min.): 5 rpm, Churchill Roll Grinder Swing 1600 mm Lrodpfx Apsxvrptjhet Centres 5200 mm Cambering Wheel Size 26” x 2” Roll speeds 5-30 rpm Bed and table were re-ground and not much use since so both are perfect.

Condition: used, grinding diameter / mm Lrjdpfx Aezgipxsphot grinding length 4000 mm swing diameter / mm

Condition: used, Year of construction: 1965, faceplate diameter 3500 mm Lrjdpfxsyqtbuj Aphjt swing diameter 4000 mm turning height 3150 mm slide adjustment 1700 mm table load 25 t digital readout Heidenhain Rest 2 total power requirement 90 kW weight of the machine ca. 95 t No. 6671024 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2007, functionality: fully functional, Technical data of the VTC-100R: - Swing diameter 1,250 mm - Turning diameter 1,000 mm - Turning height 850 mm - Drive power 45/55 kW - Max. torque 582 kg/m - Rapid traverse rates (X/Z) 20 m/min - Max. workpiece weight 1,500 kg - Machine weight 23 t - Footprint 2,800 x 5,200 mm - Control system Fanuc 32i-TA (10.4" color LCD) - C-axis - 12-position Baruffaldi turret VDI60 Lrjdpfx Ajzmd Ucophst - 6 positions for driven tools - Hydraulic chuck (32") with hard and soft jaws - Clamping cylinder - Hydraulic unit with draw tube - Coolant system - Work area protection - Telescopic guard X/Z - Foot switch for hydraulic chuck - Work area lighting - 3-color indicator light - Mounting elements - Chip air blow-out system - Tool holder VDI 60 - Complete documentation Options (included): - Chip conveyor - Automatic door - Customer macro B - Automatic workpiece measurement - Oil mist extraction - Tool setter - Coolant high-pressure system - POLO filter system, 20 bar - Chip conveyor incl. hoses