Eccentric Press - Single Column

IWK PEKRD 125

Year of construction: 1975, condition: used, pressure 125 t throat 400 mm stroke 6-125 mm ram - range of adjustment 100 mm dayligth 400 mm table surface area 1100x750 mm Hedslp U Dhjpfx Ah Ejnr no. of strokes 60 Hub/min ram surface 800x550 mm hole in the table Ø 150 mm total power requirement 14 kW weight of the machine ca. 9,0 t dimensions of the machine ca. BxTxH 1500x2200x3500 mm

Condition: used, Year of construction: 1991, Pressing force 1,500 kN Adjustable stroke 20 - 132 mm Ram adjustment max. 90 mm Stroke rate 50 / 75 strokes/min. Hedorm Nqmjpfx Ah Esnr Further data and images available upon request Used, the press was completely disassembled Not operational and requires mechanical and electrical overhaul Press is currently mechanically reassembled

Condition: excellent (used), 1 lot SK 50 shots Hedpouir Unefx Ah Esnr (28556) approx. 65 pieces approx.250 kg without pallet

Condition: good (used), Year of construction: 1977, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 200 t, table width: 800 mm, table length: 1,100 mm, throat depth: 440 mm, distance table to ram: 400 mm, total length: 37,200 mm, total width: 24,000 mm, total height: 18,200 mm, overall weight: 12,600 kg, ram adjustment: 110 mm, ram stroke: 40-180 mm incl. Helmerding feed, 400 mm x 4 mm Strokes: 40 + 60 1/min Hedpstu Hvwsfx Ah Eonr Distance table/ram - adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter

Condition: used, Year of construction: 1973, machine/vehicle number: 104530, pression: 100 t throat: 350 mm table size: 690 x 840 mm clearance hole in the die: 160 mm Ø tappet area: 450 x 600 mm tappet adjustment: 80 mm stroke adjustment: 8 - 100 mm Hnjdpfx Ahjddhw So Ejr number of strokes: 60 /min engine: 380 V, 5,5 kW space needed: 1850 x 1850 x 2650 mm weight: 6800 kg

Year of construction: 1983, condition: used, machine/vehicle number: 535350, Lg-Nr. 05466, - Pressing force: 100 t - Stroke: 320 mm - Distance between uprights below the guide: 400 mm - Table size: approx. 850 x 610 mm - Through-hole in the table, offset: 335 / 300 mm - Thickness of the table clamping plate: 90 mm - Overall installation height: approx. 300 mm - Ram surface area: 600 x 335 mm - Height adjustment of the ram: 80 mm - Stroke adjustment: 10 - 130 mm - Ejector stroke in the ram: 32 mm Hodpfx Ahs E A Tms Ejnr - Stroke rate, continuous operation: approx. 56 /min - Drive: 380 V / 11 kW - Space requirement: approx. W 1900 x H 2800 x D 2200 mm - Weight: approx. 9000 kg - Includes: - UVV press safety control unit PREVENTA - Hydraulically and pneumatically actuated clutch - LUTEX additional braking system - Central lubrication system

Year of construction: 1984, condition: used, pressure 100 t throat 345 mm stroke 20-100 mm no. of strokes 60 Hub/min ram - range of adjustment 85 mm table surface area 980x650 mm ram surface 600x440 mm hole in the table Ø 200 mm table height 820 mm Hnjdoqwpv Sspfx Ah Eer tool hole in ram ¤7 65 mm weight of the machine ca. 7 t dimensions of the machine ca. 2000x2000x2900 mm

Condition: used, pressure 100 t throat 355 mm stroke 8 - 130 mm table surface area 710 x 1200 mm T-slots at tabel 3 clamping plate thickness 75 mm no. of strokes 50/80 Hub/min ram adjustment 80 mm ram surface 450 x 560 mm T-slots at ram 2 tool shank hole (depth x diameter) 100 x 50 mm max. distance table - ram 540 mm distance between columns 400 mm connected load 11,5 kW weight of the machine ca. 9,0 t Hnodpotqm Dhefx Ah Eor Overall size 1,65 x 2,25 x 3,05 mm - increased installation height - with die cushion - converted to safe control (Pilz PLC), safe for “hand inlay work”. on the open tool"

Year of construction: 1986, condition: used, pressure 100 t throat 330 mm stroke 10-130 mm no. of strokes 56 Hub/min ram - range of adjustment 80 mm table surface area 830x600 mm ram surface 250x130 mm table height 870 mm tool hole in ram 50 mm weight of the machine ca. 11 t Hnsdslp U Stspfx Ah Ejr dimensions of the machine ca. BxTxH 2100x1900x3000 mm

Year of construction: 1986, condition: used, COFMO Press KD2330 Manufacturer COFMO Type Eccentric Mechanical Press Industrial Applications Stamping, punching, cold forming, and sheet metal processing in production workshops. Main Technical Specifications: Hjdpfx Aexlcxkoh Eenr - Nominal Force: 101.97 tons (1,000,000 N) - Model: KD2330 - Year: 1986 - Strokes per minute: 95 - Slide Adjustment: 100 mm - Working Voltage: 220 – 380 V - Air Pressure Requirement: 5 atm - Weight: 8,000 kg 🧩 Machine Usage The COFMO KD2330 102-ton press is designed for intensive sheet metal operations such as stamping and forming. It is ideal for high-speed, high-force applications in industries like metalworking, automotive parts manufacturing, and tooling. ⚙️ Features / Differentiators With its 95 strokes per minute and nearly 102 tons of force, this machine combines speed and power. The dual-voltage compatibility (220/380V) and pneumatic system make it highly adaptable for various industrial setups. Strength: 101.97T Strokes/min: 95 Weight: 8000Kg