Die casting machine

IDRA NEO 1000

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm Hfedpoiu Smbefx Ah Sod injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a conventional cylindrical grinding machine EMAG Weiss W 11 Evolution. The conventional external-internal face cylindrical grinding machine fits perfect for single parts, prototypes and small batches. The basis of the EMAG Weiss W 11 Evolution machines is the established KARSTENS cylindrical grinder concept. No hydraulics, axis drives with servo motors and screw spindle drive, technology entry of the grinding parameters via touchscreen, automatic dressing with compensation, automatic axis release. Hfsdstmrlhspfx Ah Sod TECHNICAL DATA Workpiece lenght: max. 1,500 mm Center height: 200 mm | Ooption 320 mm Workpiece weight: 250 kg External grinding wheel diameter: max. 500 x 80 mm Workpiece headstock: MK4 | Option MK5 / MK6 Tailstock: MK 4 Price, delivery time and equipment of the machine according to agreement.

Condition: good (used), Working wheel dimensions (od x id x width) Ø610x80xØ304.8 mm Brand CNC FANUC Model CNC 21 Oi TB Maximum length between points 1060 mm Max. travel Z axis 750 mm Max. length to be ground 600 mm Point height 225 mm Ø min/max to be ground 10 - 300 mm Max. weight of the piece 125 Kg Max. travel X axis 325 mm Grinding wheel speed 45 m/s Main motor power 11 Kw Working head speed 30 to 1000 rpm Working head cone MORSE 5 Working head motor power 12 Nm Tailstock cone MORSE 4 Tailstock quill travel 70 mm Tailstock hydraulic movement 150 mm Total power 22 Kw Length 2300 mm Height 1900 mm Width 2634 mm Weight 7750 Kg Hodpfx Aetrgugjh Sofd Accessories Cooling equipment with paper filter; MARPOSS meter, positioner and balancer;

Condition: used, Year of construction: 2022, operating hours: 4,264 h, grinding length: 500 mm, grinding width: 300 mm, CNC CYLINDRICAL GRINDER OGM-350 UNC III by OKAMOTO Equipped with Fanuc 0i control, 2 interpolated axes Grinding diameter: 300 mm Grinding length: 500 mm KEY FEATURES OF THE GRINDER - User-friendly CNC control - FANUC 0i, 2 interpolated axes - Conversational programming - Programmable in-feed dressing with compensation - Automatic rapid infeed and retraction of the workhead - Dimensional compensation - Interruption for dressing function Hfjdpfx Ahewqcaze Sod - Automatic calculation of swiveling angle for table positioning - Sturdy construction and functional machine bed design - Electronic handwheel - Spindles: high-precision roller bearings for the grinding and workhead spindles with lubrication for long life - Ultra-precise ball screws for X and Z axes, directly coupled AC servo motors STANDARD EQUIPMENT LIST - Grinding wheel Ø 405x50 (UNC) - Grinding wheel flange, mounting Ø 127 mm - Separate electronic (portable) handwheel for X/Z axes - Machine enclosure with large front sliding doors - Tailstock with sleeve and manual lever - Micrometric cylindricality adjustment of the tailstock - 7.5 kW grinding motor - Infinitely variable grinding spindle drive - Grinding speed up to 45 m/s - Automatic central lubrication - Device for automatic longitudinal or plunge positioning, including measuring head and software - GAP-Eliminator with sensor (reduces “air grinding” time during multiple infeeds) - Balancing arbor - 10.4'' color touchscreen panel with graphic interface - Leveling screws and plates - Service tool kit - Dressing tool holder including diamond - Operating manual - Machine painted in OKAMOTO gray-beige (Munsel 5Y6/1) or according to specification at extra cost - Machine equipment compliant with CE standard

Year of construction: 2013, condition: ready for operation (used), A CNC cylindrical grinding machine GSN Schleiftechnik including automatic paper belt filter, center point, diamond dressing tiles and grinding wheel changing aid is available. Workpiece length: 1500mm, max. workpiece diameter: 250mm, max. workpiece weight: 150kg, machine dimensions X/Y/Z: approx. 6300mm/2500mm/2500mm, weight: approx. 9000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible. Hodowxxwropfx Ah Sjfd