Hydraulic Press

Hugh Smith 1000ton

Condition: repair required (used), Year of construction: 1983, functionality: limited functionality, total height: 2,650 mm, total width: 3,640 mm, total length: 4,620 mm, overall weight: 6,800 kg, Technical details: X-axis travel: 1000 mm Y-axis travel: 560 mm Z-axis travel: 800 mm Rapid traverse: 6 m/min Working feed: 1- 400 mm/min. Rotary axis resolution (degrees): 0,001 Control unit: Philips 432 Spindle revolutions: 20-2000 RPM Spindle stroke: 125mm Spindle taper: ISO 50 Spindle power: 15kW Feed force axis X and Z: 8000N Feed force axis X and Z: 24000N Table size 1250 x 800 mm Dodpfx Aqounwd Totscn Table load: 800kg Programing resolution: 0,001mm Documentation for machine Note: Defect electronic card should be replaced. The machine is mechanicaly in excellent condition, and could easily be retrofitted with modern CNC controls.

Condition: used, MULLER 250t Dcedpferfxhkox Aqtjn PRESSURE: 250t STROKE: 550mm TABLE DIMENSIONS: 2500x1400mm

Condition: excellent (used), Year of construction: 1989, I am selling a CNC lathe Mazak QuickTurn 20N. Lathe in bdb condition. Equipment: MAZATROL T-2, control MAZATROL CAM-T-2. Dcodpfxou U R E Ae Aqton

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 400mm/300mm/495mm, spindle center table distance: 25mm-325mm, spindle nose table distance: 125mm-620mm, rapid traverse: 24m/min, feed rate: 5m/min, spindle type: ball screw, spindle diameter: 36mm, speed: 6000rpm, spindle power: 5.5kW, spindle mount: BT40. Tool slots: 30, tool change time: 2.5s, clamping time: 7s, max. tool diameter/length: 110mm/250mm, max. tool weight: 8kg. Table dimensions X/Y: 315mm/315mm, table angle: 7.5°, table clamping force: 3400kg, max. workpiece weight: 150kg. Dimensions X/Y: approx. 1900mm/2300mm, weight: approx. 4500kg, control: Fanuc 0-M, operating hours: 732h, piece counter: 172776. Including cooling lubricant system and tool magazine with 30 places. Documentation available. On-site inspection is possible. Dcedpfx Aqjt Nhmzsten

Year of construction: 1990, condition: good (used), Somab CNC lathe Type: Unimab-500 Control unit: Somab PL+5 Turningdiameter bed: 500 mm Turningdiameter support: 300 mm Spindle bore: 72 mm Turning length: 1500 mm Speed max: 2500 RPM Diameter faceplate: 320 mm Power: 18 KW Year: 1990 Included central lubrication system and coolant pump Dimensions: 340x180x175 cm LxWxH Dsdpjigl Taofx Aqtscn Weight: ca 6500 KG

Condition: new, machine/vehicle number: DF0279, pressing force: 1,000 t, pressure:1000 t passage width:1500 mm stroke:800 mm total power requirement:91 kW weight of the machine ca.:68 t dimensions:3850 x 2900 x 6000 mm Dcodpsfxyiysfx Aqton return capacity:100 t Table dimensions:1500 x 2250 mm :1500 x 2250 mm table height over floor:1300 mm pre-running speed:200 mm/sec return speed:200 mm/sec Pressure Speed:10 mm/sec :1200 l Oil cooling (electric):1,5 kW (max) Max Working height:1000 mm :200 mm/sec Monitor:12 Zoll

Condition: excellent (used), Indexable milling cutter Dodpfx Aqjhzt E Tetscn (28233) Type Gigacut AW 125-13-8 Diameter 125 mm Arbor hole 40 mm Weight 2.5 kg

Condition: used, Year of construction: 1990, x-travel 0600 mm y-travel 500 mm z-travel 500 mm table-size 500 mm feed range 2- 10.000 mm/min rapid traverse 10 m/min Dcsdpfx Aeyq Sk Uoqten Tool bore ISO 40 turning speed range 0- 6300 U/min main drive DC 8 kW CNC control Dialog 11 total power requirement 23 KVA weight of the machine ca. 5050 kg dimensions of the machine ca. 3,0x2,5x2,0 m CNC milling machine with Dialog 11 control, housing arround working area, rotary table as a 4th axe and ATC with 40 Positions. Machine has been refurbished by FPS in 2010.

Condition: used, Year of construction: 1996, x-travel 1040 mm y-travel 510 mm z-travel 640 mm control Mazatrol type M Plus Tool changer 24 Pos. weight of the machine ca. 5,5 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Dcedeyqr Uyjpfx Aqten apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1964, table height: 800 mm, Flanging and dishing machine GRAAF - HVP 300 Die height 1400 mm Ram size    400 mm Hydro pack 1800 x 1800 x 1200 capacity Kg: 300 Distance between column:1700mm Table Length: 1500mm Dodpfx Aqswq Rugjtecn Table Width: 1500mm Table Height: 800mm Ram stroke: 900mm Approche speed: 4000mm/min. Working speed: 3000mm/min. Return speed: 4000mm/min. Length: 2500mm Width: 1500mm Height: 3840mm Weight: 15000kg