3-axis CNC machining center

Hermle U 630 T

Condition: repair required (used), Year of construction: 1999, operating hours: 70,000 h, functionality: unexamined, machine/vehicle number: 13290, overall weight: 4,800 kg, a used HERMLE milling machine - U 630 T - No. 13290 Ndsdpfex H Iyfsx Af Sef The machine was purchased second-hand in 2023, refurbished, and put into operation. The TNC 426 control unit was replaced, as well as the fan; spindle power was measured, the spring assembly was exchanged, and approximately 100 man-hours were invested. Subsequently, an accident occurred during the loading process, when the used milling machine fell off the forklift forks from a height of approximately 1,500 mm. The entire machine housing was severely deformed and twisted. Some of the enclosure doors were broken out. The sliding door to the working area was severely bent forward and no longer functional. The mounting bracket for the control unit was heavily deformed. The electrical components were almost completely torn from their fixings and were dangling from the cabling coming out of the control cabinet. The point of impact was in the top left area of the rear enclosure element. The material in this area was heavily abraded/scratched with black dirt deposits adhering to the enclosure. The upper cover of the working area had been ripped out of its mounting and was missing. All panel gaps of the housing showed significant irregularities. A louvered cover device inside the working area was torn from its mount, and the guide bar of the device was clearly bent downward. Further damages possible. Our ref.: BT/KÖ/255187/25/JPA Location: 57578 Elkenroth

Condition: used, Demag Ergocontrol, 4 MB- for NC4 control system - removed from Demag ET 6 system Ndodorr Ehmopfx Af Sjf - removed from running machine - fully functionalmanufacturer: Demag spare part no.: 7If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: good (used), Year of construction: 2000, Hermle U 630 T, Ndjdpfox Ez A Dex Af Sef year of manufacture 2000, Heidenhain TNC 426 control, travel X/Y/Z 875/500/500 mm, 16-position tool changer, SK 40 taper, vertical head swiveling 0 - 90°, quill stroke 75 mm, electronic handwheel, chip tray, spindle replaced in 2018, geometric alignment in 2022,

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 12263, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 7,000 rpm, quill stroke: 75 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X / Y / Z: 875 / 500 / 500 mm Quill stroke: 75 mm Table NC table: 500 mm C-axis: 360° B-axis: ±30° Rotational speed: 11 rpm Resolution: 0.001° Component accuracy: ±15'' Table load capacity: 300 kg Drive Drive power (100% / 40% duty cycle): 7.5 / 11 kW Torque (100% / 40% duty cycle): 266 / 390 Nm Speed range: 20 – 7,000 rpm Vertical milling head Quill stroke (vertical and transverse): 75 mm Swivel range: 0 – 90° Feed drives Feed forces X, Y and Z: 8,000 N Rapid traverse: 15 m/min Njdpfx Ajw Rc Abjf Ssdf Feed screw diameter and pitch: 32 / 10 mm Measuring system Direct path measuring system, resolution: 0.0001 mm Position tolerance Tp in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm Tool system Spindle taper: SK 40 (similar to DIN 2079, for tool holders according to DIN 69871 A) Number of tool stations: 16 Tool diameter: 80 mm Tool diameter with free adjacent stations: 100 mm Tool length: 250 mm Tool weight: 6 kg MACHINE DETAILS Control unit: Heidenhain TNC 410 Electrical data Operating voltage: 400 V / 50 Hz Total connected load: 14 kVA Dimensions & Weight Dimensions (L x W x H): 3.0 x 2.3 x 2.2 m Weight: 4,800 kg

Year of construction: 1997, condition: ready for operation (used), X-travel: 630mm, y-travel: 500mm, z-travel: 500mm, table diameter: 900x528mm, NC rotary table diameter: 500mm, connected load: 14kVA, length: 3600mm, width: 3900mm, height: 2100mm, weight: 6t, with documentation. Ndedpfx Afjlc N Ste Sef

Condition: ready for operation (used), Year of construction: 2000, operating hours: 14,430 h, functionality: fully functional, machine/vehicle number: 13479, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 300 kg, rotary table diameter: 500 mm, spindle speed (max.): 7,000 rpm, Machine can be shipped free of charge for €1,850 net! TECHNICAL DETAILS Control: Heidenhain TNC 410 Travel X / Y / Z: 875 / 500 / 500 mm Quill stroke: 75 mm Table NC rotary table: 500 mm C-axis: 360° B-axis: ± 30° Speed: 11 rpm Resolution: 0.001° Part accuracy: ±15'' Table load: 300 kg Drive Drive power (100% / 40% duty cycle): 7.5 / 11 kW Torque (100% / 40% duty cycle): 266 / 390 Nm Speed: 20 - 7,000 rpm Vertical milling head Quill stroke (vertical and transverse): 75 mm Swivel range: 0 - 90° Feed drives Feed forces X, Y and Z: 8,000 N Rapid traverse: 15 m/min Diameter and pitch of the feed spindles: 32 / 10 mm Measuring system Direct position measuring system, resolution: 0.0001 mm Position tolerance Tp in X-Y-Z axis according to VDI/DGQ 3441: 0.010 mm Tool system Spindle cone: SK 40 (similar to DIN 2079, for tool holders according to DIN 69871 A) Number of tool positions: 16 pieces Tool diameter: 80 mm Tool diameter with free adjacent positions: 100 mm Tool length: 250 mm Tool weight: 6 kg MACHINE DETAILS Operating voltage: 400 V / 50 Hz Total power: 14 kVA Ndedpfjvn Si Iox Af Sjf Weight: 4,800 kg Dimensions: 3.0 x 2.3 x 2.2 m Control switch-on time: 50,052 h Program run: 15,142 h Spindle switch-on time: 14,430 h Coolant system Tank capacity: 120 l Flow rate at a flow pressure of 3 bar: 24 l/min