Eccentric press

HEILBRONN REPD 100 S

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder only for sale per pallet pallet5 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc pallet 6 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 7 euro 2640 total Lhsdpfx Adjvry T No Ejf 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 8 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc

Condition: used, Year of construction: 1993, pressure 160 t throat 400 mm Lsdpfx Adstqm Dfo Ejhf stroke 20 - 160 mm table surface area 1200 x 800 mm ram adjustment 100 mm no. of strokes 60 Hub/min ram surface 860 x 520 mm total power requirement 15 kW weight of the machine ca. 16 t dimensions of the machine ca. 1,7 x 2,5 x 3,23 m - Additional clamping plate - cross-grooved - Foot switch - Hydraulic clutch - Hydraulic ball screw clamp - Hydraulic overload protection - Flywheel brake - Hydraulic system with oil cooler

Condition: excellent (used), 1 lot SK 50 shots (28556) approx. 65 pieces Lhodpfxouir Unj Ad Esf approx.250 kg without pallet

Condition: excellent (used), pressure 125 t throat 400 mm stroke 6 - 125 mm ram adjustment 100 mm daylight (stroke down, ram adjustment above) 400 mm table surface area 1100 x 750 mm no. of strokes 60 Hub/min total power requirement 16 kW weight of the machine ca. 10 t dimensions of the machine ca. BxTxH 1,1 x 1,9 x 3,53 m - Machine is partially overhauled - was completely disassembled and technically checked, - new seals Ljdet Eix Ropfx Ad Eshf - new pneumatic clutch - new seals in the compensating cylinders - new drive motor - new ball spindle - new coloring - current UVV test and braking time measurement Machine safe for hand inlay work For an additional charge, we can equip the machine as follows: - Work area protection with BWS / cycle operation, but only in conjunction with a new control cabinet (separate) with ABB safety control and touch panel - 2-hand operation on separate stand

Year of construction: 1983, condition: used, machine/vehicle number: 535350, Lg-Nr. 05466, - Compressive force 100 t - Throat 320 mm - Width in the column below the guide 400 mm - table size approx. 850 x 610 mm - drop-through hole in the table 335 / 300 mm - thickness of the table clamping plate 90 mm - overall installation height approx. 300 mm - surface of the chair 600 x 335 mm - height adjustment of the chair 80 mm - stroke adjustment 10 - 130 mm - ejector stroke in the chair 32 mm Ledpfx Ae E A Tmed Eohf - Stroke rate continuous operation approx. 56 /min - Drive 380 V / 11 kW - space requirement approx. W 1900 x H 2800 x D 2200 mm - weight approx. 9000 kg - with : - UVV press safety control unit PREVENTA - Hydr. + pneumatically operated clutch - LUTEX additional brake system - central lubrication

Year of construction: 1984, condition: used, pressure 100 t throat 345 mm stroke 20-100 mm no. of strokes 60 Hub/min ram - range of adjustment 85 mm table surface area 980x650 mm ram surface 600x440 mm hole in the table Ø 200 mm table height 820 mm tool hole in ram ¤7 65 mm Lhsdpfx Aeqwpv Sed Eof weight of the machine ca. 7 t dimensions of the machine ca. 2000x2000x2900 mm

Condition: used, Year of construction: 1973, machine/vehicle number: 104530, pression: 100 t throat: 350 mm table size: 690 x 840 mm clearance hole in the die: 160 mm Ø tappet area: 450 x 600 mm tappet adjustment: 80 mm stroke adjustment: 8 - 100 mm number of strokes: 60 /min Lhedpoddhw Sefx Ad Esf engine: 380 V, 5,5 kW space needed: 1850 x 1850 x 2650 mm weight: 6800 kg

Condition: used, pressure 100 t throat 355 mm stroke 8 - 130 mm table surface area 710 x 1200 mm T-slots at tabel 3 clamping plate thickness 75 mm no. of strokes 50/80 Hub/min ram adjustment 80 mm Ledpfx Adstqm Dhe Ejhf ram surface 450 x 560 mm T-slots at ram 2 tool shank hole (depth x diameter) 100 x 50 mm max. distance table - ram 540 mm distance between columns 400 mm connected load 11,5 kW weight of the machine ca. 9,0 t Overall size 1,65 x 2,25 x 3,05 mm - increased installation height - with die cushion - converted to safe control (Pilz PLC), safe for “hand inlay work”. on the open tool"

Year of construction: 1986, condition: used, pressure 100 t throat 330 mm stroke 10-130 mm no. of strokes 56 Hub/min ram - range of adjustment 80 mm Lhjdpfx Adelp U Ste Eof table surface area 830x600 mm ram surface 250x130 mm table height 870 mm tool hole in ram 50 mm weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2100x1900x3000 mm

Condition: excellent (used), Complete, professional HOLEX tool holder for sale, designed for micro-drilling and precision machining. Technical specification: • Manufacturer: HOLEX • Reference: 300520 16 • Model: SK 40-1/10-100 • Length: 100 mm • Collet: ER16 with HOLEX nut (marking G 6.3 / 15,000 rpm visible) • Spindle: SK40 • Max torque: 70 Nm • Balancing: G 6.3 / 12,000 rpm • Year: 11/10 • Included: micro drill – mounted and ready for operation Very good technical condition – the collet holds securely, drill is undamaged. Ideal tool for highly precise operations in electronics, medical, or toolmaking applications. Ljdpfxjw Rd Swo Ad Ejhf Shipping or personal pickup available.