Edgebander with corner rounders

HEBROCK F4

Condition: excellent (used), Year of construction: 2013, operating hours: 468 h, Edge banding machine Hebrock F 4 with jointing, corner copying, and two scraper blades. Edge thickness (coil) approx. 0.4 - 2mm Workpiece height approx. 10 - 40mm Feed rate approx. 7m/min Noise protection hood Extendable workpiece support Extraction connection 1 x 140mm Units: - Top pressure manual adjustment with SIKO counter - Infeed fence manual adjustment with SIKO counter - Edge thickness manual adjustment with SIKO counter - Jointing cutter with diamond cutters, cutters sharpened Kfedpfx Aex Nbplsf Soa - Gluing unit with automatic edge feeder for coil material up to 2mm - Glue pot with quick-change device for fast color change - Pressure zone with 3 rollers - Cross-cut saw - Combination milling unit R2 with manual adjustment between thin- and thick-edge - Radius scraper R2, pneumatically retractable - Corner rounding unit R2, manually adjustable between thin- and thick-edge The profile cutter can also be used for shelf programs, i.e. only rounding on straight edges, not on corners - Glue joint scraper manually retractable - Hood locking - CE mark - Operating manual A video of the machine in operation can be sent on request. All indexable inserts of the milling units and scrapers have been renewed or turned; saws have been sharpened. The machine is therefore ready for immediate use. The diamond jointing cutters have also been sharpened. Paint damage has been touched up. Machine has approx. 468 operating hours. Machine is in very good condition, see original photos. Machine dimensions approx. 4050 x 1100 x 1400mm (LxWxH) Weight approx. 800kg. The machine can be inspected by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse, see “more offers from this provider.”

Condition: good (used), Year of construction: 2008, Total Weight: 3500 kg Trailers weight: 866 kg Kedohqd Siepfx Af Sjfa trailer type: Three axle Trailer alomost not useed. It was used just several times for small deliveryeis..

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Condition: very well maintained; low operating hours Equipment and technical data: - With PLC control including touchscreen - With joint milling unit with DIA tool up to 2 mm milling depth (maximum joint thickness 1 mm for special materials such as multiplex) - With extendable workpiece support - With quick-heating glue pot with glue change device - With cross-cut saw - With combination milling cutter r = 2 mm with separate pneumatic adjustment - With corner copying unit r = 2 mm - With surface scraper - Maximum edge thickness: 2 mm - Minimum - maximum workpiece thickness: 10 - 40 mm - Minimum workpiece length: 180 mm - Feed speed: approx. 7 m/min - Ready for operation: approx. 3.5 min - Power consumption: approx. 7.4 kW - With undercarriage - Extraction port: 1 x 140 mm Dimensions: approx. 4,200 x 1,300 x 1,400 mm Weight: approx. 750 kg Ksdpfx Ajx Enqhsf Sofa Availability: approx. end of January 2026 Location: Hesse

Condition: used, Year of construction: 2016, Plate feed direction: from operator to the left Max. edge thickness: 2 mm Min. workpiece thickness: 10 mm Max. workpiece thickness: 40 mm Min. workpiece length: 180 mm Feed speed: 7 m/min Heating time: 4 min Jointing unit: Yes, with 2 milling units Jointing tool: diamond cutter Diameter: 70 mm Height: 43 mm Adjustment of infeed fence: diamond cutter Cut-off shear up to: 2 mm Individual edge feeding: possible Gluing: glue contact roller Cut-off saw: Yes Kjdpfx Ajx Hwq Tef Sjfa Combination flush/chamfer/radius unit: pneumatically adjustable Scraper: Yes, scanning Display of units: on the display Control type: PLC line control Operation: touch screen Motor power: 7.4 kW Travel device: Yes Extendable roller support: Yes Protective hood: Yes Weight approx.: 750 kg Extraction connection diameter: 140 mm Electrical connection: 400 Volt/50Hz Storage location: Customer

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Specifications and technical data: Kjdpfx Aow I U Rfef Sefa Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Extension for extendable outrigger Standard infeed fence 3 LED lights in the infeed area Jointing unit with two motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edge feeding system 1903, fully automatic GluJet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3, pneumatic Spray device GM 201 after pressure unit End trimming unit 1918, pneumatic Extraction hoods for end trimming unit Combined trimming unit FR201 with DIA cutters R=2 mm Contour trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short-term Location: Flörsheim

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, working height: 900 mm, space requirement height: 1,400 mm, space requirement length: 4,050 mm, space requirement width: 1,300 mm, operating pressure: 7 bar, with PLC control system (including touchscreen) and hot-melt adhesive application to the workpiece for edge materials up to 3 mm: joining cutter (including DIA tool), up to 2 mm cutting depth (max. 1 mm for special materials such as multiplex), maintenance-free glue pot with quick-change pot preparation including glue discharge device, HF trim saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combined version), corner round milling unit, surface scraper (including pneumatic lift), robust chain feed, ball-bearing double roller upper pressure, viewing window from machine rear side, extendable workpiece support, feed rate approx. 10 m/min. Complete with quick-change set-up for corner milling unit, radius scraper (including pneumatic lift), chassis F 4 – Technical Specifications Max. edge thickness: 3 mm Min. / Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: 7 m / min Kfsdpjx E N Nfefx Af Sja Ready for operation: approx. 3.5 min Max. power consumption: ∅ approx. 7.4 kW Electrical connection: 400 V / 3 Ph / 50 Hz Worktable height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction port: ∅ 1 x 140 mm

Condition: new, Year of construction: 2024, ON STOCK!!! Pre-milling unit End Trim saw Top and Bottom Trimming unit Corner Rounding Unit Surface Scraper Touch Screen Controller Max. edge thickness: 3mm Min./max. workpiece thickness: 8–50mm Min. workpiece length: approx. 160mm Kfsdpfx Afsglfwtj Ssa Feed speed: 10 m/min. Ready to operate: approx. 3.5min. Power consumption: ∅ approx. 7.4kW Electrical connection: 400V/3Ph/50Hz Table height: approx. 900mm Machine dimensions: approx. 4,050x1,300x1,400mm (LxWxH) Weight: approx. 820kg Exhaust connection: ∅ 1x140mm Edge Banding Machine with PLC Premilling (DIA-tools incl.) up to max. 2 mm milling depth Corner rounding unit Radiusmilling R=2 mm Radius edge milling R=2 mm radius profile scraper

Condition: used, Year of construction: 2020, Used machine Year of construction: 2020 Equipment and technical data: Extendable workpiece support, spacing 600 mm Jointing milling unit FG201 with 2 milling heads for edge jointing on panels Cutter, diamond 70 x 64 x 30 mm, Z2 + 2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) Cutter, diamond 70 x 64 x 30 mm, Z2 + 2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) Edge feeding 1903 automatic transport for rolled and strip material GJ301 adhesive application system with sensing nozzle Automatic refill function, level monitoring with automatic glue refill Pressure unit 1912-3 pneumatic, first roller is driven with pneumatic immersion control End trimming unit 1918 (60 mm), pneumatic, chamfering 0/10 degrees, pneumatic adjustment Extraction hoods for end trimming unit 1918 Multifunctional milling unit FR201 (2 x 0.6 kW, 18000 min-1) for flush, radius, and radiused exit Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12000 min-1), corner copying function up to 3 mm edge thickness Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip removal, for the contour milling unit 1832 Scraper unit 1929 Chip container HW reversible knives for scraper holder R = 2.0 mm (2 pcs required) Kodpfx Afsw Nafdo Ssfa FK701 FL-SCRAPER HM Location: Solingen Availability: Short-term

Condition: new, Year of construction: 2025, Hebrock F 4 For complete processing of your panels For all those who don't want to do things by halves. With the F 4, we offer you a model with which you can produce fully processed edges on a machine length of just 4 m. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 7 m/min. Ready for operation approx. 3.5 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Suction nozzle Ø 1 x 140 mm PLC control 10″ touchscreen Top-mounted rapid-heat adhesive container (maintenance-free) Support plate for edging material Automatic central lubrication (cross-cut saw, corner router) Visual display for workpiece sequence Extension arm (can be pulled out to the front) Interchangeable basin pre-equipment incl. adhesive changing device for PUR processing Surface scraper with dual tracing Pneumatic roller capping (scissor cut design, Hebrock system) Double roller top pressure (ball bearing) Transport chain with bolted special chain plates Jointing cutter Milling unit cross-cut saw Corner cutter Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg Kodshqadcspfx Af Ssfa - available at short notice -

Condition: excellent (used), Hebrock F4 Edgebander Well-equipped, possibility to inspect before purchase. Pre-milling cutters, Glue application by roller, Equipped with glue drain, Interchangeable glue pot Pneumatic pre-cut guillotine, Pressure rollers, Trimming saw for final cut, Kfodoxq A Ebopfx Af Sja Top and bottom milling unit, R1–R2 pneumatically adjustable, Profile scraper, Corner rounding unit, pneumatically adjustable, Flat scraper, Max workpiece height: 50 mm, Max edge band thickness in roll: 3 mm, Feed speed: 7 m/min, Power requirement: 7.4 kW, Machine inspected, ready for testing, in very good condition. Only 5,000 meters of use. Leasing purchase possible.

Condition: new, Year of construction: 2022, functionality: fully functional, Edgebanding machine Hebrock F5 equipped with a PLC control system. It features a maintenance-free, coated rapid-heating glue pot, with pre-set configuration for quick pot changeovers. - 10” touchscreen display - Maximum edge thickness: 3 mm - Minimum workpiece length: 160 mm - Feed speed: 7 m/min - Ready for operation in approx. 3.5 min - Maximum power consumption: 7.4 kW - Electrical connection: 400V / 3-phase / 50Hz - Table height: 900 mm - Machine dimensions: 4300 x 1300 x 1400 mm - Approximate weight: 900 kg Kedpfewyu Rwox Af Ssfa Options/Extras: • Whispercut pre-milling unit, workpiece height up to 50 mm • Combi cutter head • Corner rounding radius: R = 2 mm • Radius corner rounding: R = 2 mm • Quick change system for corner rounding motor • Multi-radius scraper R2/R1 • Release agent spraying unit • Cleaning agent spraying unit • Edge protection spraying unit • Nesting function for milling unit and radius profile scraper • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) • Integrated LED workspace lighting

Condition: new, 3 mm Total length 4122 mm Feed speed 10 m/min. with PLC control (incl. touchscreen) and hot-melt adhesive application to the workpiece foredgebanding material up to 3 mmjointing cutter (incl. DIA tool) up to 2 mm cutter depth1),maintenance-free glue tray with change tray pre-equipment incl. adhesive discharge device,HF cross-cut saw station (approx. 12,000 rpm),HF trimming station (approx. 12,000 rpm) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter,surface scraper (incl. pneumatic discharge device) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter) with separate pneumatic routing adjustment andinterchangeable plate router (combi version),corner rounding router,surface scraper (incl. pneumatic lift-out),free space (for cleaning station or radius scraper),robust chain drive,ball bearing mounted double roller top pressure,viewing window from rear of machine,pull-out workpiece support,feed rate approx. 10 m/. No. F4/00/11- Joining head WhispercutF4/500/10- Combination milling headF4/500/20- Radius milling cutter R=2mmF4/500/2- Radius corner milling cutter R=2mmF4/08/2- Quick-change equipment for corner milling cutterF4/08/4- Radius scraper (incl. F4/09- Radius radius scraper R=2mmF4/09/2- ChassisF4/10- Pneumatic 3-point adjustment(radius, chamfer, flush milling)F4/30 Kfsdpovwd Uujfx Af Sea