CNC - Machining center

Haas VM-6

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HAAS VM-6 HE Mold Maker was manufactured in 2008. It features an impressive X-axis travel of approximately 1,626 mm, Y-axis travel of approximately 813 mm, and Z-axis travel of approximately 762 mm. The machine includes a 24-position tool changer and has high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 HE vertical machining centre we have for sale. Contact us for further details. • Through-Spindle Coolant (TSC): Yes • High Speed Machining: Yes • Electrical supply: 360–480 V, 3-phase, 50–60 Hz • Full load: 40 A • Largest load: 70 A • Spindle history: Complete spindle replaced with a new unit in May 2021; control counters were reset afterward (do not reflect total lifetime hours) • Current counters since spindle replacement: • Power On Time: 5,204 h • Cycle Start Time: 3,525 h • Feed Cutting Time: 427 h • M30 Counter: 121,779 • Current machine condition: Not operational due to a defective main spindle motor Bdodpezy Izysfx Abaei • Spindle motor: Yaskawa Electric, Type UAKB-31BHA12, AC Spindle Motor Technical Specification Taper Size ISO 40

Condition: used, CNC CONTROL Controller: Hurco MAX5 AXES Number of controlled axes: 5 Number of simultaneous axes: 5 X-axis travel mm: 3.200 Y-axis travel mm: 2.100 Z-axis travel mm: 900 B-axis degrees: C-axis degrees: ±360 Distance spindle nose - table surface mm: 66 - 966 Feed rates m/min: 10 / 10 / 10 Rapid traverse m/min: 15 / 15 / 10 WORKTABLE Table dimensions mm: 3.000 x 1.700 Number of T-slots: 7 T-slot width mm: 22 H8 T-slot spacing mm: 220 Max. table load kg: 11.000 SPINDLE Max. spindle speed rpm: 18.000 Spindle power kW (S1/S6): 45 / 63 Spindle torque Nm: 106 Spindle taper / interface: HSK63-A COOLING Coolant through spindle bar: 40 TOOL SYSTEM Tool holder / taper: HSK63-A Bjdpoz Aqhbofx Abaedi Tool magazine capacity: 60 Max. tool diam. (free adj. places) mm: 76 Max. tool length mm: 300 Max. tool weight kg: 7

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,016 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VM-6 was manufactured in 2018. It features an impressive X-axis travel of 1,626 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 vertical machining centre we have for sale. Contact us for further details. Bdjdpjzh Hgdsfx Abaji

Condition: good (used), Year of construction: 2011, Takisawa TMM 250 M3, year of manufacture 2011, Fanuc 160 is TB control, main spindle bar capacity up to 76 mm, sub spindle bar capacity up to 51 mm, 15-position turret, driven tools, C axis, sub spindle, max. turning length 1,230 mm, high-pressure coolant 8 bar, milling spindle B axis with Capto C6, 60-position Capto tool magazine, B axis swiveling +/- 115°, B axis clamping in 1° increments, B axis 7.5 kW / 8,000 rpm, Y axis +/- 130 mm. B axis overhaul in 2024 for €20,000. Bedpfoyazwpjx Abaedi

Condition: used, Year of construction: 2007, turning diameter 275 mm turning length 900 mm control TRAUB TX8i-s spindle passage 65 mm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min x-axis 175 mm z-axis 650/975 mm y-axis +/- 40 mm rapid traverse X/Y/Z 20 / 40 / 20 m/min feed capacity X/Y/Z 5,5 / 5,5 / 10 kN tool turret - number of stations 10 number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,50 kW max. torque at 25% load 17,50 Nm tool taper DIN 69880 Ø30x55 spindle diameter in front bearing 110 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t Bjdpfxezwg Nde Abajdi dimensions of the machine ca. 10,00 x 3,50 x H3,00 m

Condition: good (used), Year of construction: 2007, operating hours: 4,262 h, functionality: fully functional, machine/vehicle number: R7AV13, turning diameter: 65 mm, Can be powered up, the condition of the bar feeder is unknown, removed from production due to arrival of a new machine. On both turret heads, the use of a driven tool holder is possible in all positions. Bdedpfxjyxxhqs Abaji

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC530, spindle speed (max.): 18,000 rpm, spindle nose: hsk 63, number of spindles: 30, Equipment: chip conveyor, documentation/manual, FPT vertical machining center model RAID Travels 1500X1100X600 mm 30-position tool changer HSK 63 spindle, 18,000 RPM (overhauled in 2025) CNC HEIDENHAIN iTNC 530 Bdsdox H Iyljpfx Abasi Remote electronic handwheel Chip conveyor

Condition: like new (used), Year of construction: 2010, operating hours: 14,010 h, turning length: 800 mm, turning diameter: 430 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 455 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 6,000 rpm, feed length X-axis: 455 mm, feed length Z-axis: 430 mm, workpiece weight (max.): 5 kg, total height: 8,500 mm, total length: 2,500 mm, total width: 2,495 mm, overall weight: 8,500 kg, CNC controller: Fanuc FS31IA5 (MAPPS 4) Capacity Turning length mm: 800 Max. turning diameter mm: ø: Ø430 Turn-mill spindle X-axis travel mm: 455 Bsdpfx Aoy Rpq Tjbaodi Z-axis travel mm: 800 B-axis degree: ±120 (0.001º) Speed spindle rpm: 12000 Drive power kW: 9/5.5 Y-axis travel mm: ±105 Tool magazine Magazine places: 76 Tool holder: Capto C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret X-axis travel mm: 160 Z-axis travel mm: 730 Number of tool slots St .: 10 Main spindle Speed spindle rpm: 6000 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 7.5/5.5 Chuck type: Solid Chuck (8") Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Coolant gun Working time hours Under power: 76482 Spindle 1: 14010 Spindle 2: 4306 Potencial nominal kVA: 48 Basic machine dimensions / weight Length mm: 2500 Width mm: 2495 Height mm: 8500 Weight kg: 8500

Condition: excellent (used), Manufacturer, Emco. Machine type, Hyperturn 665 CNC lathe. Inventory number, 22281. Machine designation, Drehmaschine Emco Hyperturn 665. Machine number, serial number R7A Q 2701. Year of manufacture, 2002. Control system, Siemens Sinumerik 840D with PCU 50 V1. Programming, DIN ISO, Siemens ShopTurn capable. Axes configuration, X axis and Z axis. Max turning diameter over bed, approx. 665 mm. Max turning diameter over cross slide, approx. 500 mm. Max turning length, approx. 1,000 mm. Swing diameter, approx. 665 mm. Main spindle. Spindle speed range, up to approx. 4,000 rpm. Spindle nose, DIN standard spindle interface. Spindle motor power, approx. 30 kW. Spindle torque, high torque for soft turning applications. Tool system. Tool turret, CNC controlled turret. Number of tool stations, typically 12 positions. Tool holder type, VDI standard. Live tooling, not included, soft turning configuration. Tailstock, CNC controlled tailstock. Quill diameter, approx. 100 mm. Quill travel, approx. 120 mm. Coolant system, included. Chip conveyor, included. Machine accuracy. Positioning accuracy, approx. 0.01 mm. Repeatability, approx. 0.005 mm. Electrical supply data. Supply voltage, 400 V. Frequency, 50 Hz. Rated current, 110.00 A. Backup fuse, 125.00 A. Connected load, 56.00 kW. Bdodpfx Absx S Hghsaji Compressed air requirement, approx. 6 bar. Machine dimensions. Machine length, approx. 4,500 mm. Machine width, approx. 2,200 mm. Machine height, approx. 2,100 mm. Machine weight, approx. 8,000 to 9,000 kg depending on configuration. Application, precision soft turning of steel, aluminum, and non hardened materials.

Condition: used, Year of construction: 2005, turning diameter 640 mm turning length 1.185 mm control SINUMERIK 840D swing diameter 640 mm distance of spindle heads 1500 mm slide I: X1 / Y1 / Z1 / B slide travel X-axis 550 mm slide travel Z-axis 180 mm Z- Travel 1.185 mm B - axis 240 ° feed x-axis 0 - 40.000 mm/min feed y- axis 1 - 24.000 mm/min Feed z- axis 1 - 70.000 mm/min feed B-axis 1 - 20 1/min rapid traverse X/Y/Z 40 / 24 / 70 m/min feed capacity X/Y/Z S6: 7,00/11,00/7,50 kN tool taper HSK 63 turning speed milling-spindle 10 - 12.000 1/min power capacity at 100 % load 13,20 kW power capacity at 40 % load 22,00 kW torque milling spindle 60 / 100 Nm no. of workpieces in the magazine 46 Stück tool length - max. 350 / 200 mm tool diameter 80 mm wotkpiece diameter with 2 vacant positions 120 mm weight of tools max. 6 / 10 kg slide II: X2 / Z2 slide travel X-axis 180 mm Z- Travel 1.050 mm feed x-axis 1 - 24.000 mm/min Feed z- axis 1 - 36.000 mm/min rapid traverse x + z axis 24 / 36 m/min feeding force S6: 11,00/9,00 kN turret (x-stations) 12 tool taper DIN 69880 Ø40 Driven tools - quantity 12 Driven tool turning speed 1 - 4.000 1/min power capacity at 100 % load 10,70 kW torque S1: 32 Nm Slide III - longitudial travel Z3 mm Z- Travel 1.150 mm Feed z- axis 1 - 36.000 mm/min rapid traverse Z-axis 36,00 m/min feed capacity Z - axes S6: 13,00 Nm Main spindle ISM90 turning speed main-spindle 10 - 4.000 1/min power capacity at 100 % load 36,00 kW power capacity at 40 % load 45,00 kW max. torque at 40% / 100% load 800 / 630 Nm spindle bore 80 mm turning speed opposed-spindle 10 - 5.000 1/min power capacity at 100 % load 21,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 320 / 240 Nm spindle bore 80 mm total power requirement 70,00 kW weight of the machine ca. 20,00 t dimensions of the machine ca. 8,50 x 4,50 x H3,10 m Machine with SIEMENS SINUMERIK 840D control, main- and counter-spindle, chip conveyor, dust exhauster, DMG-automation WH10top. Main-spindle ISM90: hollow clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter-spindle ISM76: closed center clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-up device with integrated conveyor belt, automatic protective cover, differential pressure clamps. Incl. pump-frame for coolant - Pump 1: 17 l/min at 80bar - Pump 2: 20 l/min at 8bar - Pump 3: 40 l/min at 20bar Without coolant unit. Was connected to a central coolant-system. Accessories: Bsdpfeydfllex Abajdi Hainbuch collet chuck incl. collets Ø30,45,50,55,60,65,72,82,85,90 1 piece workpiece pick-up-gripper for turret