Swing Forging Press

Eumuco KSP 65/650T

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Brand : Schuler Knsdpfx Ashcnxrjf Sof Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Table dimensions ( x-y/mm) : 3000×1800 Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 New hydraulic presses for sale

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: 150 359 - 11683, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. Knedpfx Afjt Ucpbs Ssf The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. The machines are for sale as a single unit and individually. Inquire by phone or email!

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Knsdpfovbcxtjx Af Sef Stroke 400 mm No of strokes / min - 12 Main motor 41kw Movie available

Condition: used, Year of construction: 1993, pressure 160 t throat 400 mm stroke 20 - 160 mm table surface area 1200 x 800 mm ram adjustment 100 mm no. of strokes 60 Hub/min ram surface 860 x 520 mm total power requirement 15 kW weight of the machine ca. 16 t dimensions of the machine ca. 1,7 x 2,5 x 3,23 m - Additional clamping plate - cross-grooved - Foot switch - Hydraulic clutch Kodpfotqm Dfjx Af Sjnf - Hydraulic ball screw clamp - Hydraulic overload protection - Flywheel brake - Hydraulic system with oil cooler

Condition: like new (used), pressing force: 750 t, HOT FORGING PRESS MANZONI 750 TON Knedpjt Dwu Dofx Af Sef

Condition: excellent (used), Year of construction: 1982, total height: 5,600 mm, pressing force: 400 t, air pressure: 6 bar, distance between side stands: 650 mm, distance between stands: 1,600 mm, stroke length: 280 mm, table length: 1,600 mm, table width: 1,120 mm, Trimming press in working condition: Nominal force: 400 ton Stroke: 280 mm Number of strokes per minute: 36 1/min Table size: 1 600 x 1 120 mm Slide size: 1 435 x 960 mm Main electric motor: 37 kW Knodpjubyrxsfx Af Sof Overall dimensions: - Length: 3 010 mm - Width: 2 135 mm - Height: 5 600 mm Total weight: 50 000 kg.

Condition: ready for operation (used), Year of construction: 1955, An Eumuco screw forging press (Screw-Press) is available. Forming stages: 2, press force: 1250kN, hold-down force: 2500kN, stroke rate: 80rpm, ram stroke: 140mm, hold-down stroke + punch: 100mm, table dimensions X/Y: 680mm/680mm, ram dimensions X/Y: 680mm/680mm, drive power: 35kW. On-site inspection is possible. Knjdpfx Aewm Nm Tef Sof

Condition: used, Year of construction: 2024, functionality: fully functional, year of last overhaul: 2024, Forging Hammer Type Beche KGH 8.0 Modernization 2023-2024 (Year of manufacture: 1980) The hammer has been completely overhauled in Germany. Hydraulic Drive - Completely disassembled in 2024, cleaned, control valves renewed New Control System - Siemens S7-1500F PLC control with touch panel Anvil Base (U-frame) - Contact surface ground - Insert adapted - Wedge newly manufactured and inserted Test Run - Hammer was assembled in 2024 and underwent a test run in 2025 Knsdpfx Afjxwat Nj Sef Technical Description: Working capacity: 80 kJ Max. die height: 600 mm (without dovetails) Min. die height: 200 mm (without dovetails) Ram depth: 810 mm Ram weight: 6,100 kg Anvil base weight: 105,000 kg Total weight: 130,700 kg Total height: 7.3 m above floor level

Condition: excellent (used), Year of construction: 1969, functionality: fully functional, pressing force: 160 t, table width: 1,200 mm, table length: 800 mm, working height: 600 mm, stroke length: 650 mm, Equipment: safety light barrier, Lasco TSP 160S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2019. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lasco TSP 160S press Kedjv E Rd Ejpfx Af Sjnf A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2019. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: good (used), Year of construction: 1977, Pressure 160 t Ram adjustment 75 mm Strokes/min. 30-90 Kjdovi Ikqopfx Af Senf Stroke adjustment 20-130 mm Power requirement 15 KW Electrical system 380 V