Injection molding machine

ENGEL

Condition: used, Year of construction: 2013, Clamping Force: 60 tons (600 kN) Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: 25 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Injection Speed: Approximately 139 mm/s Itjdpfswp E Hzox Ad Nsb Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm

Condition: excellent (used), Year of construction: 2007, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/28 TECH Ijdsu Eu Tnopfx Ad Nstb Baujahr: 2007 Schließkraft: 28 Tonnen Holmabstand: HOLMLOS Schnecken DN: 25 mm Max. Hubvolumen: 49 ccm³ Spritzteilgewicht 44 g/PS Steuerung: CC200 Ausstattung: - 1 x Kernzug

Condition: good (used), Year of construction: 2008, Clamping force: 80 t Screw diameter: 35 mm Distance between tie bars V: 600 mm Distance between tie bars H: 670 mm Itodpfx Ajyarxded Nob Shot volume: 154 cm3 Type: Horizontal Drive: Hydraulic Engel e-victory 310/80 Year of manufacture 2008, 48765 engine hours Machine weight 5700Kg Prümer sneku 35mm, standard Minimum mold height 245mm, distance between plates 635mm pri maximum opening Dimensions of clamping plates 670x600mm, diameter of the central ring 125mm Closing force 80 tonnes (800kN) Maximum injection pressure 2000bar, injection speed 222mm/s Maximum stroke volume 160mm (154cm") Number of circuit coolers 12 with float pressure gauge (8x fixed side, 4x movable) 1x control of hydraulic cores Integrated regulator and 24 heating zones.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: ES650H/200W-200HL-2F Baujahr: 2004 Schließkraft: 200 Tonnen Holmabstand Holmlos Einbauhöhe min.: 500 mm Öffnungsweg: 750 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht in PS: 216 g Schnecke DN 2: 25 mm Max. Hubvolumen: 69 cm³ Spritzteilgewicht in PS: 60 g Itedpfeyak A Iex Ad Nob Steuerung: CC100 Technische Ausstattung: -Roboter Engel, Typ: ERC23/1-E -4 Stück Kernzüge -Drehtischsteuerung

Condition: ready for operation (used), Filling opening diameter: 98mm, material: stainless steel, max. output: 1400kg/h, perforated disk: 3mm, dimensions X/Y/Z: approx. 1000mm/850mm/1400mm, weight: approx. 300 kg. Ijdpfx Ajtryk Nod Njtb

Condition: excellent (used), Year of construction: 2017, Engel DUO11050/1300 PRO (2017) Clamping force: 1300 ton Min/Max Mould: 700-1400mm Platen size HxV: 2200x1990mm Tie bar distance: 1530x1275mm Screw dia: 120mm Injection volume: 6447 cm3 Iodpeyaat Aefx Ad Notb VIPER 60 robot

Year of construction: 2004, condition: ready for operation (used), controller manufacturer: ENGEL, controller model: n/a, overall weight: 10,500 kg, This Engel Elast 1500/250V was manufactured in 2004. It's a vertical injection moulding machine designed for precision and efficiency in plastic processing. Consider the opportunity to buy this Engel Elast 1500/250V vertical injection moulding machine. Contact us for more information. Machine Benefits Technical Machine Benefits • 3 machines available - note that one of the available machines has a defective control unit. • Rated voltage: 3 x 400v • Frequency: 50 hz Itodpfsx U U Ixex Ad Njb • Connected load: 64kw • Rated current: 107a • Control voltage: 230 v Extra Information Machine still under power

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Itodpfx Adoh Nypfo Nob

Condition: excellent (used), Year of construction: 2016, Equipment: documentation/manual, Engel victory 1350/400 tech (2016) Controll : CC300 Clamping force: 400 t Screw diameter: 55 mm Shot weight: 560 g Distance between tie bars V: 1100 mm Distance between tie bars H: 1220 mm Shot volume: 618 cm3 Type: Horizontal Drive: Hydraulic 8x core pullers 2x pneu valve Itodpfxex H Nk Ej Ad Neb conveyor Wittmann linear robot

Condition: ready for operation (used), Year of construction: 2011, clamping force: 6,500 kN, screw diameter: 90 mm, This Engel DUO 4550/650 was manufactured in 2011. It features a clamping force of 6500 kN and a maximum opening stroke of 1650 mm. The machine supports a mold height ranging from 400 mm to 2000 mm and a platen size of 1510 × 1440 mm. The screw diameter is 90 mm, enhancing its injection capabilities. Consider the opportunity to buy this Engel DUO 4550/650 hydraulic injection moulding machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Net clamping/injection unit: 20 / 10 tons • Opening force (with pressure pad): 510 kn • Opening force: 190 kn • Platen size (h × v): 1510 × 1440 mm • Tie bar diameter: 175 mm • Mold weight (max): 11000 kg Isdpfx Aox U Tmyjd Nstb • Dry operation (euromap 6) time: 2. 9 sec • Dry operation (euromap 6) stroke: 700 mm Extra Information Injection Unit Screw stroke: 390 mm Injection capacity: 2480 cm³ Screw torque: 97 kNm L/D ratio (3-zone screw): 27 Recovery rate (3-zone screw): 104 g/s L/D screw length (Barrier): 22 Plasticizing capacity (Barrier): 135 g/s Injection rate: 720 cm³/s Injection rate (with increased injection pressure): 630 cm³/s Injection pressure (regenerative): 1910 bar Specific injection pressure (increased): 2180 bar Nozzle stroke: 600 mm Nozzle contact pressure: 150 kN Heating capacity (standard): 62 kW Number of heating zones (incl. nozzle): 9 Rated drive power: 90 kW

Condition: excellent (used), Year of construction: 2000, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 120 mm, clearance between the columns: 1,120 mm, column diameter: 180 mm, displacement volume: 5,430 cm³, Equipment: documentation/manual, The machine is ready to load. 900 ton clamping force, equipped with take out robot, hopper dryer, hopper loader. First and only owner since produced. The price is loaded on truck. Itjdpfx Adjickd Hs Nsb

Year of construction: 2016, operating hours: 48,336 h, condition: ready for operation (used), This Engel victory 1800/300 was manufactured in 2016. A hydraulic injection moulding machine with a 300-ton machine power, it features a screw diameter of 60 mm and supports up to 16 hot runners. Equipped with four hydraulic core pullers and a Viper 12 robot, it offers enhanced automation capabilities. Contact us for more information about this machine. • Machine power (tons): 300 • Between columns w x h (mm): 750 x 1000 • Min. mold height (mm): 400 • Max. mold height (mm): 900 • Max. distance between plates: 1300 • Diameter of center ring / height: 160/15 • Diameter of thread on ejector coupling: M24 • Diameter of screw (mm): 60 • Hot runners: 16 • Hydraulic core pullers: 4 Ijdpfx Adjx U Dp Es Netb • Robot: Viper 12

Condition: good (used), Year of construction: 2012, Clamping force: 160 t Itedpfx Adex U Avkj Neb Screw diameter: 35 mm Type: Horizontal Drive: Hydraulic

Condition: new, Year of construction: 2024, The Just Lift JL250 to JL750 crane from Just Lift has been designed to speed up and optimize all lifting and logistics operations, increasing productivity while ensuring maximum safety and ergonomics for the operator. - Motorized tiller head guidance - Arm control with remote controls - Hydraulic lift and extension - Anti-tipping system as standard - 100 % electric Max. Forward travel speed km/h 4.0 Max. Reversing speed km/h 4.0 Lifting system Max. Load capacity kg 250 to 750 No. Operator 1 Arm lifting speed mm/s 22.00 Arm descent speed mm/s 15.00 Arm extension speed mm/s 7.00 Arm return speed mm/s 5.00 System pressure bar 125.00 Oil type ISO VG 46 Oil quantity l 2.00 Weight without batteries kg 610 to 1,080 Weight incl. 105/130A AGM batteries kg 680 to 1,146 Length max mm 2,835 Length min mm 1,891 Width mm 980 Height handlebar/drawbar mm 1,229 Height max mm 3,030 Height min mm 2,313 Iodpfeh Tx R Tsx Ad Nstb Lifting height max mm 3,010 Wheelbase mm 1,000 Turning circle mm 1,050 We can currently only offer new equipment.

Condition: new, Engel bimetallic screw cylinder, new and unused Diameter: 105 mm Ijdpfox Up U Tjx Ad Notb LD 22 Unit 4550: 3380 cm3 Unit 5550: 3700 cm3