ES 200/60 HL ST

ENGEL

Condition: good (used), Year of construction: 2004, clamping force: 23,000 kN, Clamping force: 2300 t Screw diameter: 135 mm Type: Horizontal Drive: Hydraulic Injection Moulding Machine – ENGEL DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h 🔧 Clamping Unit Clamping force: 2300 kN Platen dimensions (H × W): 2900 × 2500 mm Distance between tie bars (H × V): 2000 × 1600 mm Min. / Max. mould height: 700 – 1890 mm Maximum opening stroke: 3800 mm 💉 Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm³ Shot weight (PS): 8071 g Injection pressure: 1600 bar ⚙️ Additional Equipment and Features Screw replaced in 2011, reinforced type – suitable for special materials. Option for two-component injection (2-shot). Mould tilting function. Magnetic platens. 2 hydraulic core pulls. 36 heating zones for the mould. 10 hydraulic cascade zones installed (expandable). Machine interface languages: English, German. Dimensions and Weight Net weight (including control cabinet): approx. 131 t (machine 113 t + control cabinet 18 t) Engel 2300 tonnes - 2004. Screw replaced in 2011. Reinforced screw for special materials. Can be injected twice. Option with mould tilting. Magnetic plates. Gbjdpsz Rplyefx Ahdeu 2 hydraulic cores. 36 heating zones for the mould 10 hydraulic cascades installed in the machine, there are more Screw diameter 135 mm Languages in the machine: English, German Machine without robot , machine in excellent condition

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Closing 80 tons Year 1998 Scrow 35 mm Gbodopdr Aiopfx Ahdju Stroke volume 154 cm3 Enlarged clamping plate 660x560 Mould height min 200 mm

Condition: excellent (used), Year of construction: 2007, operating hours: 38,500 h, 1,0 St. gebr. Spritzgießmaschine Gbjdjz Nxilspfx Ahdou Hersteller: ENGEL Typ: VICTORY 200/50 TECH Baujahr: 2007 Schließkraft: 50 Tonnen Holmabstand: HOLMLOS Schnecken DN: 30 mm Spritzteilgewicht 70 g/PS Steuerung: CC200 Ausstattung: -1 x Kernzug hydraulisch

Condition: excellent (used), Year of construction: 2016, operating hours: 33,921 h, functionality: fully functional, ENGEL Duo 1350H/330W/600WP combination machine including robot Year of manufacture: 2016 Operating hours: 33921 h Clamping unit Clamping force: 600 t Opening stroke: 1400 mm Tool mounting height: 450 - 1080 mm Maximum mold parting line distance: 1850 mm Mold size (h x v): 1115 x 975 mm Injection unit Screw diameter: 55 and 35 mm Injection volume: 618 + 154 cm³ Injection weight PS: 590 + 151 g Injection pressure: 2183 + 1600 bar Equipment: - Interface for rotary table/index plates - Core pull system, 2-way fixed mounting plate - Core pull system, 4-way movable mounting plate - Tool heating, 40 control circuits - Microcomputer CC200 Gbsdpfx Ahjz Nkavsdsu Robot Engel Viper 40 RC300 - Max. handling weight: 23 kg - Z-axis: 4280 mm - X-axis: 1200 mm - Y-axis: 1500 mm - C-axis compact drive M - A-axis compact drive M - 8 additional compressed air circuits - 6 additional vacuum circuits

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Gsdpjvygh Nsfx Ahdobu Screw diameter: 30 mm Weight: 3,200 kg Available immediately from stock

Condition: excellent (used), Year of construction: 2009, operating hours: 44,561 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 55 mm, Equipment: documentation/manual, Here, as a dealer of injection molding machines, we offer the following well-maintained used injection molding machine: We also purchase well-maintained injection molding machines from the current model year 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Engel Type: VC 1350/300 spex Serial number: 173072 Year of manufacture: 2009 Operating hours: 44,561 h Control: CC200 Fully functional Gedpfx Asz Ng Rwjhdjbu Condition: very well maintained Machine is from a German first owner Extras - Handling Viper12 Injection unit Screw diameter: 55 mm Injection weight: 570 g/shot Injection pressure: 1763 bar / increased to 2183 bar Injection volume: 618 ccm Clamping unit Clamping force: 300 tons / 3000 kN Tie bar spacing: tie-bar-less Platen dimensions: 1100 x 700 mm (h x v) Tool opening stroke: 900 mm Tool installation height: 400 mm Max. distance between platens: 1300 mm Ejector force: 90 kN Clamping unit: hydraulic Available immediately from our warehouse in Hanover/Germany or delivered to your location against reimbursement of shipping costs. Worldwide delivery possible. The machine is in our sole ownership. The requested machine is available immediately in our warehouse in Hanover and is offered after functional testing and can be inspected while powered on. For information about the machines we offer and our company: - We only sell machines that we have purchased from current production and that are stored in our warehouse in Hanover. - All offered machines are inspected and tested before dismantling. - We do NOT sell insolvency goods. - We are NOT a broker dealing with third-party property. - All offered machines come from successful companies for whom maintenance and care are a matter of course. - All offered machines can be inspected in our warehouse.

Condition: ready for operation (used), Year of construction: 2019, clamping force: 1,200 kN, total width: 2,200 mm, total height: 2,065 mm, overall weight: 8,450 kg, product length (max.): 5,259 mm, Hydraulic injection moulding machine manufactured in 2019. This Engel Victory 120 BMG features a clamping force of 120 t and a tie-bar-less design, ensuring efficient operation. It includes a high-speed injection unit and an advanced CC300 control system with a 21.5" full HD touchscreen. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 120 BMG machine we have for sale. Contact us for further details regarding this machine. • Tie-bar-less design • Machine hours: on-time 2,767 h; estimated operating time ~200 h (never used for regular series production) • Oil filling: 300 L • Power supply: 3x400 V + N + PE / 50 Hz • Control system: CC300, 21.5" full HD touchscreen • Hydraulic system: ecodrive SHV3-HSI servo-hydraulic Gedpfx Asz I Nixohdobu • High-speed injection with accumulator • Oil cooler: standard • Injection unit size: hydraulic 200 • Platen size: standard Euromap • Mould height: increased +200 mm • Opening stroke: extended +200 mm • Ejector system: platen ejector • Core pull: hydraulic and pneumatic • Cooling water connections: machine and mould separate • Flow regulator: 0–10 l/min • e-flomo temperature control system: 4 and 6 circuits • Remote service: e-connect.24 (2 years) Additional equipment • Robot: ENGEL viper 12 RC300 • Max payload: 12 kg • Strokes: Z 1,160 mm; X 600 mm; Y 900 mm • C axis: pneumatic 0–90°, 30 Nm • Max system height: 3,600 mm • Min deposit height: 1,000 mm • Integrated conveyor belt • Belt width: 350 mm • Belt temperature resistance: up to 300 °C • Temperature control unit: HB-Therm Thermo-5 HB-160Z1 • Max temperature: 160 °C • Heating power: 8.0 kW • Pump: 0.50 kW, 30 L/min, 52 m • Cooling capacity: 30 kW @ 60 K • Vacuum pump: Pfeiffer DUO 35, 32 m³/h • Induction heating system: 50 kW, 50–200 kHz • Melting chamber: max ingot weight 100 gNo plastic extruder included!

Condition: excellent (used), Year of construction: 2000, Engel ES 330H80V/125HL .2F Gbjdpfjigrinsx Ahdsu Year of manufacture: 2000 Closing force: 125 tons Multi-component injection molding machine Control system: CC100 Cylinder H: 35 Cylinder V: 18 1x Hydraulic core pull unit, BAP 1x Proportional hydraulic indexing plate connection, BAP 16x Hot runner zones 2x Magnetic clamping plates for BAP and FAP

Condition: like new (used), Year of construction: 2019, clamping force: 500 kN, Equipment: documentation/manual, _ENGEL – Injection Moulding Machine Technical Data_ Godpfxoz Iyldj Ahdebu Serial number: 232665 Model: E‑VICTORY _Plasticising Unit 1_ • Screw diameter: 18 mm • Listed diameter options: 15 / 18 / 20 mm; 18 mm is installed • Screw stroke: 80 mm • Maximum injection volume: 20 cm³ • Screw speed: 450 rpm • Screw torque: 75 Nm • Plasticising rate, 3-zone screw: 4.2 g/s _Injection Unit 1_ • Version: Standard • Injection rate: 83.97 cm³/s • Specific injection pressure, regenerative mode: 2,400 bar _Nozzle 1_ • Nozzle stroke: 210 mm • Nozzle contact force: 40.6 kN _Material Cylinder 1_ • Screw L/D ratio: 24 • Heating zones, including nozzle: 4 • Heating power: 5.1 kW • Note: maximum available equipment _Clamping Unit_ • Clamping force: 500 kN (approximately 50 tonnes) • Opening stroke + cylinder tolerance: 408 mm • Maximum distance between platens: 600 mm • Minimum mould height: 200 mm • Platen dimensions, horizontal × vertical: 500 × 450 mm • Drop-out chute width: 400 mm • Maximum mould weight on moving platen: 300 kg • Maximum mould weight on stationary platen: 300 kg • Maximum total mould weight: 600 kg • Dry-cycle stroke according to Euromap 6: 150 mm • Dry-cycle time according to Euromap 6: 1.60 s Mould weight notes: 1. Mould overhang according to mounting platens. 2. Less the weight of any rotary table. _Ejector 1_ • Ejector stroke: 100 mm • Ejector force: 39.8 kN _Drive Unit_ • Oil reservoir capacity – injection unit, main tank: 135 l • Oil reservoir capacity – clamping unit, auxiliary tank: 0 l _Machine Basics_ • Total weight without oil: 4.0 tonnes • Total connected power: 65.0 kW Transcription note: the small footnotes below the plasticising section specify reference materials and test conditions. They are not fully legible in this photo.

Condition: excellent (used), Year of construction: 2013, Engel Victory 80/50 Spex with sprue picker Engel ER-USP5 / Hybrid machine Year of manufacture: 2013 Injection unit: Screw diameter: 18 mm Injection weight: approx. 22 g Injection pressure: 2200 bar Dosing volume: 25 ccm Gsdsz Iqn Nepfx Ahdjbu Clamping unit: Clamping force: 50 t Tie bar spacing: 0x0 mm Size of clamping plates: 500x450 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 2 Control system with hot runner system x 6 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving It is possible to change the screw diameter to 22 or 25 mm Purchase of the sprue picker at an additional cost Dimensions: Weight: 2900 kg Length/Width/Height: 3.30x1.60x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 1998, Engel ES 330/80 HL .ST Closing 80 tons Gbedpfxjvcrqne Ahdju Year 1998 Scrow 35 mm Spray softened 140 g

Condition: excellent (used), Year of construction: 2010, Engel Victory 2550/350 Tech with Engel Viper 40 robot Year of manufacture: 2010 Injection unit: Screw diameter: 80 mm Shot weight: approx. 1410 g Injection pressure: 1638 bar Dosing volume: 1558 ccm Clamping unit: Clamping force: 350 t Gedpfx Ahjz Ipvfedjbu Tie bar spacing: 0x0 mm Platen size: 1200x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Production line with Engel Viper 40 robot Tie-barless machine Robot interface Air core puller x 4 on the side of the fixed platen Hydraulic core puller x 2 on the side of the moving platen Hydraulic core puller x 1 on the side of the fixed platen Control system with hot runner system x 12 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Robot Engel Viper 40 Year of manufacture: 2010 6-axis robot: 5 axes are driven by servomotors (electric): X, Y, Z, B (rotation), A; axis C - pneumatic Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt available for an additional charge Dimensions: Weight: 25100 kg Length/Width/Height: 7.59x2.18x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Engel Victory 1350/300 Tech Ecodrive with Sepro Industrial Robot SDR 22S / Hybrid Machine / Operating Hours: approx. 18,000 hours in automatic operation Year of Construction: 2012 Injection Unit: Screw Diameter: 60 mm Shot Weight: approx. 670 g Injection Pressure: 1835 bar Dosing Volume: 735 ccm Clamping Unit: Clamping Force: 300 t Tie Bar Spacing: 0x0 mm Platen Size: 1200x1000 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 200 - Touchscreen Additional Equipment: Production line with Sepro Industrial Robot SDR 22S Machine in very good technical condition Operating Hours: approx. 18,000 hours in automatic operation Tie-barless, hybrid machine: energy-saving and very quiet Hydraulic core pull x 2 Control system with hot runner system x 12 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - driven by a servomotor with inverter - energy saving Proportional valve on the injection unit – precise injection Option to purchase spacer plates (movable and fixed), water-cooled plates, screw hole diameter M20 Material supply system Motan (dosing and conveying unit) available at an extra charge Robot Sepro Industrial Robot SDR 22S Year of Construction: 2016 4-axis robot: 3 axes are driven by servomotors (electric); Axis C - pneumatic Travel distances in axes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Safety package for robot Robot with adapter, conveyor belt, and protective housing from Engel Purchase of the robot and conveyor belt available at an extra charge Gsdpfjz Ipu Uex Ahdjbu Dimensions: Weight: 19900 kg Length/Width/Height: 7.06x2.13x2.30 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 1996, Engel ES 330H200V/125 HL – 2F Clamping force: 125 tons Tie bar diameter: 35 mm Tie bar diameter: 30 mm Gbodpelu Hkisfx Ahdou Injection volume: 158 cm³ 98 cm³ Year of manufacture: 1996 Enlarged clamping plate: 740 x 700 Minimum tool installation height: 350 mm Plus rotary platen

Condition: excellent (used), Year of construction: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E Robot / Machine in very good technical condition Year of manufacture: 2001 Injection unit: Screw diameter: 60 mm Shot weight: 547 g Injection pressure: 1834 bar Metering volume: 618 cm³ Clamping unit: Clamping force: 275 t Tie bar distance: 0x0 mm Platen size: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-barless machine Hydraulic core pull x 3 Hot runner control x 16 Injection unit hardened - bimetallic Machine has been regularly serviced by authorized Engel service Dimensions: Gbedpfez Ipt Dsx Ahdou Weight: 20,000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are started and tested by our service technicians before sale. You can request a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request