ES 330/80 HL. ST

ENGEL

Condition: used, Year of construction: 2005, operating hours: 110,697 h, machine/vehicle number: 52822, overall weight: 7,400 kg, This ENGEL Victory 500/120 injection molding machine will be auctioned off online as part of our industrial auction/machine auction, which is being held due to the closure of the J&S GmbH Automotive Technology facility. Dujdpfxezk Hiqe Ahbew You can find this and many other items on our platform.

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Closing 80 tons Year 1998 Scrow 35 mm Stroke volume 154 cm3 Enlarged clamping plate 660x560 Mould height min 200 mm Dujdpopdr Aiefx Ahbsw

Condition: used, Year of construction: 2017, operating hours: 38,672 h, machine/vehicle number: 214631, overall weight: 1,200 kg, This ENGEL Insert 500V/160 rotary vertical injection molding machine is being auctioned off online as part of our industrial auction/machine auction due to the closure of the J&S GmbH Automotive Technology facility. Duedpfezk Hg Nox Ahbew You can find this and many other items on our platform.

Condition: new, Year of construction: 2025, clamping force: 6,500 kN, Equipment: documentation/manual, ENGEL duo 3660/650 tech Year: 2025 Control: CC300 Integrated robot: ENGEL VIPER 40 Clamping force: 650 t Injection unit: 810 Screw diameter: 80 mm Possible screw diameters: 55 / 60 / 70 / 80 mm Shot volume: 1810 cm³ Injection capacity: 1660 g PS Injection pressure: 1800 bar (max. 2000 bar) Injection speed: 493 cm³/s Screw stroke: 510 mm Screw torque: 3600 Nm Max. screw speed: 210 rpm Plasticising rate: up to 118 g/s Nozzle orifice: 12 mm Tie bar distance (H x V): 1110 x 960 mm Platen size (H x V): 1510 x 1440 mm Opening stroke: 1800 mm Max. daylight opening: 1950 mm Mould height min./max.: 350 - 1200 mm Dry cycle: 2.8 s Ejector stroke: 250 mm Ejector force: 105 / 51 kN Dusdpfx Ahsza Au Nsbew Installed drive power: 74 kW Oil tank capacity: 750 l Equipment: * ENGEL VIPER 40 integrated robot * 2-fold hydraulic core pull on moving platen * Tool heating with 32 control circuits * Hydraulic machine

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Screw diameter: 30 mm Dujdjvygh Nopfx Ahbew Weight: 3,200 kg Available immediately from stock

Condition: excellent (used), Year of construction: 2018, operating hours: 16,500 h, clamping force: 600 kN, screw diameter: 20 mm, displacement volume: 31 cm³, injection pressure: 1,470 bar, Injection molding machine ENGEL Victory 60-28 Tech Stock No.: 503700 Manufacturer: ENGEL Type: Victory 60-28 Tech Control system: CC300 Year of manufacture: 2018 Operating hours: 16500 h Technical data, clamping unit Clamping force: 280 kN Platen size h x v: 500 x 450 mm Minimum mold thickness: 150 mm Maximum mold thickness: 550 mm Opening stroke: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Mold weight: 450 kg Dusdpfx Ahoziz Edobjw Technical data, injection unit Screw diameter: 20 mm Injection volume: 31 ccm Injection pressure: 1470 bar Screw length: 24 l/d Screw stroke: 100 mm Screw speed: 360 rpm Free injection flow rate: 78 g/s PS Number of heating zones: 4 Nozzle stroke: 230 mm Dimensions & Weight Machine dimensions L x W x H: 3.4m x 1.3m x 1.8m Total weight: 2900 kg Equipment Screen display in German Screen display in English Screen display in Polish Hydraulic core pull, 1x Air valve, 1x Screw with high wear resistance and corrosion resistance Interface for color dosing system

Condition: good (used), Year of construction: 1994, clamping force: 150 kN, screw diameter: 55 mm, clearance between the columns: 51 mm, displacement volume: 475 cm³, injection weight: 428 g, installation height: 660 mm, Injection molding machine – Maschine-Engel ES 700/150 Clamping force: 150 tons Screw diameter: 55 mm Stroke volume: 475 mm Dodpfx Ahjzklz Ejbeuw Shot weight: 428 g Tool mounting height: 250 mm – 660 mm

Condition: excellent (used), Year of construction: 2000, Engel ES 330H80V/125HL .2F Year of manufacture: 2000 Closing force: 125 tons Multi-component injection molding machine Control system: CC100 Cylinder H: 35 Cylinder V: 18 1x Hydraulic core pull unit, BAP Dujdeigrinjpfx Ahbow 1x Proportional hydraulic indexing plate connection, BAP 16x Hot runner zones 2x Magnetic clamping plates for BAP and FAP

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 Injection Molding Machine Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h Type: Hydraulic injection molding machine Category: Large-size injection molding machine Clamping force: 23,000 kN / 2300 tons Clamping Unit Clamping force: 23,000 kN Dimensions of mold mounting plates: 2900 x 2500 mm Djdszkatcspfx Ahbouw Distance between columns: 2000 x 1600 mm Minimum mold height: 700 mm Maximum mold height: 1890 mm Maximum opening width: 3800 mm Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm3 Injection weight (PS): 8071 g Injection pressure: 1600 bar Additional equipment according to available data Number of hydraulic cores: 2 Number of mold heating zones: 36 Number of hydraulic cascades: 10 Magnetic platens Mold tilting option Screw replaced in 2011 Screw reinforced for special materials Machine without robot Dimensions and weight Weight of the main unit: 113 t Weight of the control cabinet / additional components: 18 t Approximate total weight: 131 t

Condition: excellent (used), Year of construction: 2011, Clamping force: 650 t Dedsy Uffhspfx Ahbeuw Screw diameter: 90 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 2740 cm3 Type: Horizontal Drive: Hydraulic VIPER 40 Linear robot available The machine has approximately 61,600 operating hours. 6 core pulls on the moving platen, 2 cores and 4 cascade valves on the fixed platen.

Condition: ready for operation (used), Year of construction: 1999, Engel ES 200/60HL ST Closing 60 TO Year 1999 Dujdpfjvlangex Ahbsw Scrow 30 mm Enlarged clamping plate 660x560

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Duedpfjzi A Sxex Ahbew Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: good (used), Year of construction: 2011, operating hours: 39,000 h, clamping force: 4,000 kN, Vertical injection molding machine, type Engel elast 1500/400 V compact, for sale. The machine is in good condition and was in operation until recently. - Year of manufacture: 2011 - Operating hours: 39,458 Duodpfx Ahszix I Aebjw - Control system: CC200 - Clamping force: 400 tons Further information will follow. Loading will be done with a crane. Available at an additional cost: Busch vacuum pump, Piovan temperature control unit (controlled via CC200) Please contact us if you have any questions.

Condition: good (used), Year of construction: 1996, Engel ES 330H200V/125 HL – 2F Clamping force: 125 tons Dujdpelu Hkiofx Ahbsw Tie bar diameter: 35 mm Tie bar diameter: 30 mm Injection volume: 158 cm³ 98 cm³ Year of manufacture: 1996 Enlarged clamping plate: 740 x 700 Minimum tool installation height: 350 mm Plus rotary platen

Condition: excellent (used), Year of construction: 1999, Angel ES 750/150 HL Year 1999 Closing 150 tons Dedpfx Asvhcc Sehbeuw Scrow 50 mm Injection weight: 353 g Enlarged clamping plate 820x750 mm