CNC Machining center

DMG 635V

Condition: good (used), Year of construction: 2015, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: Siemens, x-axis travel 635 mm y-axis travel 510 mm z-axis travel 460 mm Control system SLIMline Siemens Main spindle speed range 20 - 12,000 rpm Main spindle drive power 13 / 9 kW Torque 83 / 57 Nm Tool holder SK 40 Clamping surface of table 790 x 560 mm Number of T-slots 4 + 1 T-slot width 4 x 14H12 / 1 x 14H7 mm T-slot spacing 100 mm Max. table load 600 kg Table height above floor 720 mm Number of tool stations 20 pos. Max. tool diameter 80 mm Max. tool diameter with free adjacent slot 130 mm Max. tool length 300 mm Max. tool weight 6 kg Total tool weight approx. max. 60 kg Feed rate max. 20,000 mm/min Rapid traverse 30 m/min Total power requirement 17 kVA Machine weight approx. 4.0 t Space requirement approx. 4.5 x 4.0 x 2.8 m Fpodjy Rzbwjpfx Abfoi ICS 12 bar Chip conveyor Preparation for 4th axis (rotary table)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 10,000 rpm, spindle nose: ISO 40, number of slots in tool magazine: 30, Equipment: CE marking, chip conveyor, documentation/manual, VERTICAL MACHINING CENTER DMG MODEL DMC 635V TRAVELS: 635x510x460 mm TOOL CHANGER RANOM 30 POSITIONS SPINDLE 10,000 RPM HIGH PRESSURE THROUGH SPINDLE CHIP CONVEYOR REMOTE HANDWHEEL HEIDENHAIN HR410 Fpedpfx Aoxq E Dajbfoi

Condition: good (used), Year of construction: 2008, Vertical machining center Machine type: DMG DMC 635 V Control: Sinumerik 840 D solution line mit shopmill Year: 2008 SPECIFICATIONS Travel X-Axis: 635 mm Y-Axis: 510 mm Z-Axis: 460 mm Fpsdpezincisfx Abfei Rapid motion: (X/Y/Z): 30 m/min. Spindle speeds: 20 - 10.000 rpm Spindle motor: 9 / 13 kW Tool: SK 40 Toolchanger Tool capacity: 20 Table size: 790 x 560 mm Machine weight: 4.000 kg Equipment No chip conveyor Electronical handwheel Linear measuring system in all 3 axes

Condition: good (used), Year of construction: 2008, Vertical machining center Machine type: DMG DMC 635 V Control: Siemens Sinumerik 840 D Year: 2008 Fjdezi D Axopfx Abfspi SPECIFICATIONS Travel X-Axis: 635 mm Y-Axis: 510 mm Z-Axis: 460 mm Spindle speeds: 0 - 14.000 rpm Tool: SK 40 Toolchanger Tool capacity: 30 Table size: 790 x 560 mm Max. Table Load: 600 kg Req. space (LxBxH): 2,530 x 1,900 x 2,600 m Machine weight: 4.500 kg Equipment Chip conveyor Internal cooling: bar Working mode: 4 Chip rinsing pistol

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Fooke Endura Type 8. Fodpfx Abjv N Uuvefepi Year of manufacture 1999, Siemens 840 D Powerline control, X/Y/Z travel 3000/2500/1150 mm, Bridge height 800 mm, 23 kW milling spindle, Forked milling head with 365° rotation axis, Swivel axis +/- 100°, Feed rates up to 15 m/min, Spindle speed up to 16,000 rpm, HSK A 63, Electric handwheel, Machine weight 50,000 kg

Condition: excellent (used), Year of construction: 2013, Control: Heidenhain iTNC 530 Traverse path X: 635 mm Travel Y: 510 mm Z travel: 460 mm Spindle speed: 10,000 rpm Spindle power: 13/9 KW Tool holder: SK 40 Pallet size: 800 x 500 mm Pallet load: 400 kg Fpjdpstk Nzbsfx Abfsi Tool changer: 30 places Rapid traverse: 30 m/min 3D measuring probe TS 649 Table probe Rinsing gun handwheel Linear scales

Condition: ready for operation (used), Year of construction: 2007, operating hours: 36,012 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, controller model: 3D Heidenhain i TNC 530, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 635 mm Travel range, Y-axis: 460 mm Travel range, Z-axis: 510 mm Spindle speed range: 20 - 10,000 rpm Table dimensions: 790 x 560 mm Table load capacity: 600 kg Tool holder: SK 40 Number of tool magazine slots: 20 MACHINE DETAILS Fpsdpezb Dzmsfx Abfei Control system: 3D Heidenhain i TNC 530 Total power consumption: 13.9 kW Operating hours (according to counter) Spindle hours: 36,050 h Power-on hours: 91,000 h Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,000 x 2,150 mm Machine weight: 3.6 t

Condition: reconditioned (used), CNC vertical machining center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of construction: 2010 Travels: X 635 Y 510 Z 460 Speed range: 20 - 8,000 rpm infinitely variable With the following accessories: Rigid angled table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Heidenhain TT 140 tool length measuring system Fully protected cabin with sliding doors and interior lighting Coolant device Signal light 4 colors Fpsdpfxsuqmvkj Abfei Chip conveyor Chip flushing gun 3 pcs. Height-adjustable machine shoes Operating instructions

Condition: excellent (used), Year of construction: 2006, DMG DMC 635 V TNC530 Heidenhain Vertical CNC Machining Center The machine has undergone a thorough inspection, and the spindle has been overhauled, with bearing replacement and spindle taper grinding performed. It is in very good technical condition. Technical specifications: Travel range (X/Y/Z = 635/510/460) Working area (travels): X-axis: 635 mm Y-axis: 510 mm Z-axis: 460 mm. Spindle: Rotational speed: 20 – 8,000 rpm. Spindle taper: SK40 Work table: Dimensions: 790 x 560 mm. Maximum load: 600 kg. Fedezfarzopfx Abfspi Tool magazine: Capacity: 20 tools. Feeds: Rapid traverse (X/Y/Z): 25 m/min Control: Heidenhain iTNC 530. Dimensions and weight: Weight: approx. 3,900 kg. Dimensions: approx. 3.0 m x 2.3 m x 2.5 m. The machine has a cast iron construction and is designed for precise machining of parts, often used in series production. It is possible to equip the milling machine with a 4th-axis rotary table. The machine can be inspected and tested at our company's premises.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 1,748 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, total height: 2,650 mm, total width: 2,530 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 3,900 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 17,000 W, number of slots in tool magazine: 20, product length (max.): 2,050 mm, number of axes: 3, This 3-axis DMG MORI ecoMill 635 V was manufactured in 2015. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine has a robust table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI ecoMill 635 V vertical machining center we have for sale. Contact us for further details. • CNC control: electronic handwheel • Operating hours: Power on approx. 13,550 h; Spindle cutting approx. 1,748 h • Table: 790 × 560 mm • Spindle: 12,000 rpm; SK40 / ISO40; Power approx. 13–17 kW • Tool magazine: 20 positions; Automatic double‑arm tool changer • Feed rates: Rapid traverse 30 m/min • Coolant: Flood coolant system • Drives: Digital AC servo drives • Electrical: 400 V / 50 Hz / 3‑phase; Rated power 17 kVA • Other: Machine connected and under power; very low spindle cutting hours for the year; good technical condition Additional equipment • Scraper-type chip conveyor • Discharge height: 950 mm • Tank capacity: 200 l • Coolant spray gun for swarf removal • Standard 4-color signal lamp • PROGRESSline & Planolight package Fjdpey T R I Esfx Abfjpi Technical Specification Taper Size SK 40

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : ISO40 - Spindle power : 18,5 [kW] - Spindle speeds : 12.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560 x 430 x 510 [mm] - Rapid traverses rates (X/Y/Z) : 42 sur le X et 36 en Y/Z [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 TABLE - Table dimensions : 900 x 430 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2062 x 2080 [mm] - Machine height : 2780 [mm] - Machine weight : 4800 [kg] MACHINE HOURS Fpsdpfouhbu Ijx Abfsi - Number of spindle hours : 3351 [h] EQUIPMENT - CNC : SMART - Interface : PCMCIA / RS232 - Interactive programming : Mazatrol - Electronic handwheel - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor - Workpiece probe

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,478 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, table load: 600 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The table measures 790 x 560 mm with a maximum load of 600 kg. Rapid traverse rate is 30 m/min. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V vertical machining centre. Contact us for more information about this machine. • Operating hours: 19,478 h • Table size: 790 x 560 mm Fjdpeyca Npefx Abfepi • Rapid traverse: 30 m/min • Tool changer: 20 positions • Condition: Both machines are in good working condition Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, total height: 2,670 mm, total width: 3,288 mm, spindle speed (max.): 14,000 rpm, spindle motor power: 15,000 W, product length (max.): 2,275 mm, number of axes: 3, This 3s DMG DMC 635 V vertical machining centre was manufactured in 2008. It features a maximum spindle speed of 14,000 rpm and a powerful spindle with 18.5 kW. The machine has a working area with a table dimension of 560 × 790 mm and can handle workpieces weighing up to 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG DMC 635 V machine we have for sale. Contact us for further details. • Distance table surface / spindle nose: 720 mm • Working area • Number of pallets: 1 • Table dimensions: 560 × 790 mm • Maximum workpiece weight: 600 kg • Spindle • Maximum torque: 100 / 74 Nm • Tool magazine • Tool holder: SK40 • Tool magazine positions: 20 • With adjacent tool positions free: 130 mm • With adjacent tool positions occupied: 80 mm • Maximum tool length: 300 mm • Tool change time: 1.6 s Fodpfx Aboykaawsfjpi • Chip-to-chip tool change time: 6 s • Equipment / features • Electronic handwheel • Air flow through the spindle activated via M function • Working time • Power on: 34,484 h • Spindle running: 25,110 h • Rated power: 35 kVA Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2002, Deckel Maho DMU 50 T Milling Machine Condition: Used Year of manufacture: 2002 Technical Data Tool holder: SK 40 Tool stations: 16 positions Travel X/Y/Z: 500 mm / 400 mm / 400 mm Spindle speed range: 20 - 9000 rpm, stepless Table size: 700 mm x 500 mm rotary table Motor power: at 100% duty cycle 9 kW / at 40% duty cycle 13 kW Fedpfxeyrgk Eo Abfjpi Connection total: 17 kVA Weight: approx. 3000 kg Dimensions LxWxH: approx. 2100 mm x 1520 mm (without peripherals) / approx. 2140 mm

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,641 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, table load: 600 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2008. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The machine offers a table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information. • Operating hours: 17,641 h • Table size: 790 x 560 mm • Rapid traverse: 30 m/min • Tool changer: 20 positions • Condition: Both machines are in good working condition Technical Specification Taper Size SK 40 Fpjdpjyca I Sofx Abfsi