CNC 3+2 axis universal machining center

DECKEL MAHO DMU 50

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 700 x 500 mm max. table load 500 kg T-slots 7x 14 x 63 mm number of toolpositions 60 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force ( X / Y / Z ) 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Vertical DECKEL MAHO - DMU 50 Bdodpfx Adjy E Tv Asqof - 3 Axis - only ca. 8.097h Spindle-Hrs. - Backup package for power outages - DXF import

Condition: good (used), Year of construction: 1996, machine/vehicle number: 54634, functionality: fully functional, operating hours: 51,997 h, power: 10 kW (13.60 HP), input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 500 kg, total height: 2,400 mm, total length: 2,600 mm, total width: 1,800 mm, overall weight: 3,500 kg, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, mount diameter: 40 mm, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, spindle speed (max.): 15,000 rpm, spindle speed (min.): 10 rpm, Equipment: documentation/manual, 5-axis machining center, manufacturer: DECKEL MAHO, type: DMU 50 V, year of manufacture: 1996, operating hours (h): 51,977, serial no.: 054 634, travels (X/Y/Z): 500/380/380 mm, machine on 21,341, max. spindle speed 15,000 rpm, tool holder SK40, Heidenhain control, chip conveyor, 24-fold tool changer, compact filter system INTERLIT SK200-760, year of manufacture: 21,341, max. spindle speed 15,000 rpm, tool holder SK40, Heidenhain control, chip conveyor, 24-fold tool changer, compact filter system INTERLIT SK200-760, year of manufacture: 1996, tank capacity 600 l, filter area 0.2 m² Bjdpfxorkzyaj Adqjdf

Condition: ready for operation (used), Year of construction: 2003, operating hours: 13,028 h, spindle speed (max.): 9,000 rpm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50T was manufactured in 2003. It features a 3+2 axis setup with CNC-driven linear axes and a manual swivelling rotary table for enhanced versatility. The machine comes equipped with tools and an attached tool list holder for convenience. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 50T universal machining centre we have for sale. Contact us for further details. Bsdpfxszmhwzs Adqedf - Axes: 5-axis (Typically configured as a 3+2 axis setup featuring 3 CNC-driven linear axes X/Y/Z and a manual/handwheel-operated swivelling rotary table for the B and C axes)- Included Equipment: Tools included, attached tool list holder on the enclosure shell, electronic handwheel/control pendant inside cabinet

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, CNC vertical machining center DECKEL MAHO DMU 50 eVo linear With Heidenhain iTNC 530 path control system Year of manufacture: 2008 Bdjdozlty Sspfx Adqof Travel ranges: X 500 Y 450 Z 400 Speed range: 0 – 18000 rpm, stepless (HSK 63) With the following accessories: 2-axis NC swiveling rotary table, 500mm x 380mm clamping surface Vertical tool changer with 30 magazine positions (HSK 63) Full protective enclosure with sliding doors and interior lighting Electronic handwheel 3D measuring probe Renishaw OMP 60 Tool measurement in the work area (BLUM laser) IKZ 40 bar with paper band filter Operating mode 3 + 4 Chip conveyor Signal light, 4 colors Rotoclear Compressed air supply for linear measuring systems Coolant system Chip flushing gun 4 adjustable machine feet Operating manuals

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a 3+2-axis CNC machining center, type Deckel Maho DMU50M. The Heidenhain TNC310 contouring control (also available with Siemens 810D!) makes the DMU a fully-fledged CNC machine for both production and training applications. Due to the absence of a tool changer and the conveniently positioned maintenance doors, the DMU50M requires very little space and can be positioned almost directly against a wall. The machine has been thoroughly tested in our workshop, is therefore in excellent condition, and is ready for immediate use. We look forward to receiving your inquiry! Delivery time: immediately available Machine no. xxxx Year of manufacture: 2002 Control: Heidenhain TNC310 or Siemens 810D (including Shopmill) Table design: Rotary and tilting table Speed: 20-4500 rpm, continuously programmable Feed rate: 0-5000 mm/min, continuously programmable Travel ranges X/Y/Z: 500/400/400 mm Tool holder: SK40 Tightening system: pneumatic Handwheels: 3-axis electronic / B+C axes mechanical Bdsdpfov Sy Sfsx Adqjf Weight: approx. 2800 kg Further equipment and accessories: upon request Our service promise to you: - We are a certified master machine shop - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the selected machine - About the paint color of the selected machine You can decide freely. - If you wish, you can order additional accessories such as tools, etc. directly. - If you wish, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation.

Condition: ready for operation (used), Year of construction: 2001, Available immediately ex-works: 5-axis machining center Deckel Maho Type DMU 50 M Year of manufacture 2001 Bjdoznk A Aspfx Adqodf Control system Heidenhain TNC 124 5 axes (3 plus 2) Manual rotary axes with B and C swiveling rotary table Axes B and C are displayed in the control system Table 700 x 500 mm Travel ranges X/Y/Z 500 /400/400 mm Table load 200 kg Spindle SK 40 Spindle speeds 20 – 4500 rpm Drive power 9 / 13 kW Rotational range C 360 degrees Swiveling range +95 / -10 degrees Feed rate up to 5000 mm/min Spindle speeds 20 – 4500 rpm Weight 3 tons Coolant system Price: Euro 5,500.00 plus VAT, ex-works.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 40 kVA, torque: 1,100 Nm, controller manufacturer: HEIDENHAIN, controller model: MILLPLUS, workpiece weight (max.): 330 kg, total height: 2,500 mm, total length: 3,500 mm, total width: 2,400 mm, table width: 380 mm, table length: 500 mm, overall weight: 7,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 32, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, DECKEL MAHO DMU 50 EVOLUTION Universal Machining Center - Operating hours: see photos - Tool holder: SK 40 - Resolution of the measuring system X/Y/Z: 0.001 mm - Positioning tolerance: 0.010 mm - Max. tool length from spindle nose: 280 mm - Max. tool weight with automatic tool changer: 6 kg - Max. total tool weight in the magazine: 90 kg - NC rotary table with swivel axis, clamping surface: 500 x 380 mm - Distance of T-slots/size: 63/4 H 7 mm - Centering bore diameter: 30 H 6 mm Bdjdpfx Aozlgnvjdqof - Max. revolutions of the table top (rotary axis): 33 rpm - Max. swiveling torque: 1400 Nm - Swiveling speed: 26 rpm Attention: The item must be picked up between October 7th and October 14th, 2026, on a date to be agreed upon. FCA D-35576 Wetzlar - loaded onto a truck.

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° Bdodpfjv Td Elox Adqjf B-axis – table swivelling, manual ° Table area Ø 700 x 500 mm Inclination range of table (manually) + / - ° Rotation of table (manually) 360 ° Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 2 – 6 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Feed rate max. 5.000 mm/min AC main drive, 0% / 40% power-on time approx. 9 / 13 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features • 3 Axis HEIDENHAIN Point to Point Control Model TNC 124 with Monitor, direct programming and input of data and electronic handwheels. • All 3 axis are operated by the milling head, the table is stationary so also out of proportion workpieces can be machined. • Rotary Table can be manually rotated 360° and manually inclined + / -° (each with clamping). The digital read-out of the angles is integrated in the CNC control • Simple coolant unit with pump and tank, built-on switch cabinet (SIEMENS parts) • Pneumatic tool claomping, Some tool holders available, manuals, CE-Certificate, etc. Condition : very good condition ! Ideal for training center or single parts machining ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, after conclusion of contract, before loading We always have a large selection of milling machines - CNC or conventional - available. Please let us know your requirements.

Condition: ready for operation (used), Year of construction: 1996, operating hours: 12,800 h, number of axes: 5, This 5-axis DECKEL MAHO DMU 50V was manufactured in 1996. It features a Millplus control system with software version DV400, an external hydraulic unit for clamping devices, and a Hainbuch hydraulic vise for BZI32 collet. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 50V machine we have for sale. Contact us for more information about this machine. Additional equipment • Hainbuch Hydraulic Vise for BZI32 Collet Machine Benefits Technical Machine Benefits • Machine is operated with a motor encoder due to c-axis encoder currently defective. • Internal cooling: 40 bar • External hydraulic unit for clamping devices • Counterholder on the rotary table • Rotary union on the table Bdodpfsx U Tinox Adqef • Tool positions: 24 tool positions – 2 partially available (space is broken) • Measuring probe: renishaw – prepared Extra Information • Machine still under power • Space requirement: 4200x2000mm (with the cooling unit) • Control: Millplus DV400

Condition: used, Year of construction: 2002, Deckel Maho DMU 50 T Milling Machine Condition: Used Year of manufacture: 2002 Technical Data Tool holder: SK 40 Tool stations: 16 positions Travel X/Y/Z: 500 mm / 400 mm / 400 mm Spindle speed range: 20 - 9000 rpm, stepless Table size: 700 mm x 500 mm rotary table Bdodpfx Adeyrgk Ejqjf Motor power: at 100% duty cycle 9 kW / at 40% duty cycle 13 kW Connection total: 17 kVA Weight: approx. 3000 kg Dimensions LxWxH: approx. 2100 mm x 1520 mm (without peripherals) / approx. 2140 mm