Hydr. three-roll round bending machine

DAVI MCO 3050 x 30/25 mm

Condition: good (used), Technical specifications: Dusdpfowkaalox Aarjp Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Technical data: Working length: 2050 mm Max. bending capacity: 18.0 mm Pre-bending: 12.0 mm Dsdpfsxruvzjx Aarsup Top roller diameter: 280 mm Bottom roller diameter: 280 mm Conical bending device Hydraulic drop-end bearing Motor power: 7.5 kW Dimensions (length x width x height): approx. 3650 x 1550 x 1650 mm Weight: approx. 7.5 tonnes The seller is not liable for typing or data transmission errors. The machine's condition in appearance, technology, and wear corresponds to its age; used machines are sold without any guarantee.

Condition: good (used), functionality: fully functional, mileage: 187,281 km, power: 308.91 kW (420.00 HP), first registration: 12/1999, fuel type: diesel, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: air, Year of construction: 1999, Equipment: crane, differential lock, hydraulics, trailer coupling, IVECO EUROTECH 240E42 year 1999, km 187281, EURO2, BONFIGLIOLI P30500XL/4SI crane with 4 hydraulic and 1 manual extensions, radio control, 5500 mm platform, trailer hitch Dsdpfx Aoq E Uzceareup

Year of construction: 1993, condition: ready for operation (used), Includes aggregate weigher, cement weigher, water weigher, additive weigher, special material weigher, Schlossermixer and Biotronik control system, documentation available, on-site inspection is possible. Dodpfx Asq Ttz Tsarsup

Condition: used, mileage: 108,500 km, power: 320 kW (435.08 HP), first registration: 02/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, navigation system, parking heater, MB Actros 2644 Horsetruck 4-5 horses, side and rear ramp, pop-out, kitchen on lower level, basement under living area, storage compartments all around the truck, diesel generator, 550-liter fresh water tank, 300-liter waste water tank, 5-6 berths, living room, large bed above bathroom, separate groom’s bed in living area, video surveillance and temperature monitoring for horse compartment, LG stationary air conditioning, auxiliary heating, 2 TVs with satellite system, fine wood interior, bathroom, shower, WC, air conditioning, kitchen, leather seating area, microwave, refrigerator & freezer, dishwasher, external tack locker, winch, cruise control, alloy wheels, navigation system, air suspension, steerable rear axle, tow hitch, and much more. Errors/mistakes & prior sale reserved. * NET SALE POSSIBLE. * Top leasing offers * Net price in domestic market plus 19% VAT. Duedpfx Aasx Uvpwerop Location and vehicle inspection: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all brands in the field of horse trucks and trailers. Please arrange an appointment in advance with Richard Theurer / Andreas Theurer.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 510-1986, CYLINDRICAL GRINDER JOTES SCHAUDT A440X1500 Specifications Maximum longitudinal travel: 1500 mm Grinding diameter: 298 mm External grinding: Yes Internal grinding: Yes Dimensions (L x W x H): 5400 × 2400 × 1600 mm Weight: 4800 kg Operating hours: — Power-on hours: — Condition: Rebuilt Compliant with local standards: — Status: Under power Technical features - Grinding length [mm]: 1500 - Grinding diameter [mm]: 300 - Manual table displacement [mm/rev]: 10 - Table speed range [mm/s]: 0.01–5 - Smallest table stroke [mm]: 3 - Wheelhead swivel [°]: ±90 - Centre sleeve taper [Morse No.]: 4 - Grinding wheel dimensions [mm]: 500 x 63 x 203 - Spindle speed [rpm]: 32–500 - Grinding wheel drive motor power [kW]: 5.5 Dsdpfx Aow T Ti Dearjup - Workpiece drive motor power [kW]: 0.75 - Hydraulic pump motor power [kW]: 1.5 - Grinding attachment drive motor power [kW]: 0.75 - Machine dimensions [mm]: L=5400 / W=2400 / H=1580 / Machine weight [kg]: 4800

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. Dujdpfx Aju A U Utsarep The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc.

Condition: used, functionality: fully functional, Grinding length: 973 mm Center height: 250 mm Maximum worktable tilt: +6° / -9° Centering center: MT5 Dedpfx Aajwhp Dnsroup Maximum grinding head travel: 100 mm Maximum grinding head tilt: +45° / -30° Maximum grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Maximum workpiece weight between centers: 400 kg Maximum internal grinding device grindable bore: 160 mm Machine weight: approx. 5,000 kg

Year of construction: 1967, condition: good (used), strip width: 300 - 1.250 mm strip thickness: 0,5 - 3 mm Dujdpfx Ajd Ha Irsarjp blade shaft Ø: 180 mm

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Djdovc Apbspfx Aareup Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 77x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *