Cast iron clamping cube

Cube de bridage 1290 x 920 x 510 mm

Year of construction: 2023, condition: excellent (used), functionality: fully functional, TWIN-L: mobile saw PROFICUT with loading frame for packages The new TWIN-L enlarges the range of PRINZ universal cross-cut saws. Based on the well-proven PROFICUT saws, the TWIN-L makes cost effective cuts possible with maintaining a high-quality processing of the lumber packages. Cutting efficiently with the new TWIN-L: saw is pushed and fixed by hand: no new positioning of the saw after each cut guide-bar always in correct squaring position to the package saw always remains in position during the entire cutting, no deviation Hfjdpfx Ajvzlr Noh Uep

Condition: new, Year of construction: 2023, functionality: fully functional, center width: 390 mm, center height: 310 mm, overall weight: 61 kg, input voltage: 230 V, spindle speed (min.): 50 rpm, spindle speed (max.): 3,500 rpm, spindle mount: MK 2, power: 0.75 kW (1.02 HP), - Fully cast headstock, tailstock and support for smooth running. - User-friendly operation of the cast iron hand rest. - Induction motor with high torque even at low speeds. - Digital speed display. - Hardened steel edge of the hand rest. - 24-step division for locking the workpiece. - Storage compartment means you always have your tips to hand. - Drive-out mandrel and wrench for tightening the clamping disk. - Pre-drilled holes for lighting the headstock. - Easy mounting of accessories: stand, extension, lighting and mobile base frame. - Machine bed width is 160 mm! Medium-sized LAGUNA 1216 lathe is characterized in particular by its robust elements: Cast iron headstock, tailstock, precisely ground bench bed and tool rest with resistant edge made of hardened steel. Another highlight: ergonomic control panel made of anodized aluminium with duralumin speed control. Working speeds: 50-525, 325-1750, 650-3500 rpm. Stepless speed control with duralumin regulator and change between three gear ratios with a simple lever mechanism. The motor technology ensures high torque even at low speeds. Locking the tailstock at the rear: it does not interfere with work, but is still easy to reach. Ergonomic handles with eccentric lock for a very firm grip. - Type: REVO 1216 - Recommended use: Professional production - Power (230 V): 750 W - Speed: 50-525, 325-1750, 650-3500 rpm - Max. Machining diameter over guideway: 310 mm - Center distance: 390 mm - Spindle thread: M33 × 3.5 mm - Headstock / tailstock taper: MK2 / MK2 - Tool rest / tailstock bore: 17 / 17 mm - Quill adjustment: 63 mm - Hand rest shank size: 25.4 mm (1") - Length × width × height: 750 × 226 × 442 mm - Weight: 56.3 kg - Length x width x height: 750 × 226 × 442 mm - Weight incl. packaging: 61 kg - Packaging dimensions: 920 mm × 380 mm × 520 mm Hedpfx Aetuuv Neh Usfp Scope of delivery: - Driver tip - center point - face plate - Hand rest - Punch with brass tip - Key for spindle lock

Condition: excellent (used), Year of construction: 1999, max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, AM, ... Adjustment plate on the right with micrometer screw adjustment axial Hfodpfxsvibc Ho Ah Uop Radial adjustment plate with micrometer screw adjustment 2 precision motor spindles to absorb the diamond discs.

Condition: new, Year of construction: 2024, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 450 mm, cutting length (max.): 6,200 mm, power: 15 kW (20.39 HP), saw blade diameter: 550 mm, total length: 8,100 mm, overall weight: 2,700 kg, table width: 450 mm, height adjustment type: mechanical, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, hole diameter of the disc: 80 mm, extraction nozzle diameter: 160 mm, working height: 850 mm, compressed air connection: 6 bar, warranty duration: 12 months, The basic model of the FLS technology is the FLS ECO 120. The saw is mainly used in small and medium-sized operations focused on various wood processing, but also non-wood materials. The FLS ECO 120 single-spindle saw significantly increases work efficiency and material yield (by 10-15%) and can process prisms, beams, prisms and large-area material. The input material can be plastered, dimensioned, formatted, cut to length and slats can be produced. The maximum cutting height is 120 mm, optionally 160 mm. The saw can be operated by one worker. The machine complies with the stringent occupational safety requirements of the relevant EC regulations and directives. The infinitely variable blade feed and stroke control guarantees a clean cut and high cutting performance. Thanks to the "ProLock" quick-release system, saw blade replacement is easy and, above all, safe. The saw carriage is equipped with guide and side rollers that ensure optimal guidance of the floating unit during cutting without unnecessary vibrations. The upper pressure plate and the wooden adjustable stop ensure a firm fixation of the material during cutting and thus eliminate unwanted movement. The FLS technology is unique in its quick and easy adjustment via ergonomically positioned touch panel controls. Cut width values are entered manually or by using the basic Absolut program or the optional Chain and Optim programs. The cutting path is displayed on the material by a laser beam and then guided longitudinally by a sliding saw blade. Hfodpjubbubofx Ah Uop The FLS can be used to cut prisms, squares, beams and large-area material. The input material can be plastered, dimensioned, formatted, mitred and mitre cut, grooved or cut into sections and slats. Manufacturers of grout and solid furniture or staircases will find their own. The machine can also be used for cutting non-wood materials such as PUR/PIR panels, plastic materials, sandwich, aluminium or cement board.

Condition: excellent (used), grinding diameter 300 mm Hsdpow H Dnxsfx Ah Ujfp grinding length 400 mm max. module 22 min. module 0,5 grinding wheel diam. min/max. 160 / 300 turning speeds 1500 U/min cross travel 120 mm min/max. spiral pitch 5" - unendlich ° fixture slide travel 500 mm total power requirement 5 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 3,0 x 1,1 x 1,6 m Sharpening machine for cylindrical, straight and spiral fluted tools with left or right helix; especially for spur / worm gear / profile hobs. Chest and bevel grinding possible. Equipment: Change gears, indexing disks, arbors, flanges, grinding disks, ...

Condition: good (used), Year of construction: 2004, bore capacity in steel (diameter) 28 mm throat 300 mm bore stroke 150 mm distance spindle /table 60-765 mm distance spindle/base plate 1.200 mm taper MK 3 threading M20/M24 column diameter 115 mm table-size 510 X 425 mm spindle turning speed - stepless 60 - 1:400 U/min total power requirement 1,4 kW weight of the machine ca. 350 Kg. dimensions of the machine ca. 1,9 x 0,6 x 0,9 m - Digital spindle speed display Hfedewgi Evjpfx Ah Ujp - Foot switch - Thread cutting device - Left-right rotation - 2-speed motor

Condition: new, Year of construction: 2024, functionality: fully functional, power: 11 kW (14.96 HP), saw blade diameter: 600 mm, feed length X-axis: 6,200 mm, overall weight: 2,300 kg, height adjustment type: pneumatic, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, hole diameter of the disc: 80 mm, extraction nozzle diameter: 120 mm, working height: 900 mm, compressed air connection: 6 bar, warranty duration: 12 months, The KP 900 Automat is a suitable solution for material preparation in the production of pallets and other wooden packaging products. On average, this saw can process 27-30 m3 of pallet cross-section per shift (8 hours) or about 20 thousand pieces of blocks for pallet production, depending on the cross-sectional dimensions of the processed material. The saw can be operated by one or two workers, depending on the nature of the material being processed, which is manually loaded into the machine. Basic cutting modes 1. Manual mode Each cut length is set by moving the material using the buttons on the panel, or by setting the length value on the control panel dial. Start the cut by pressing the button on the display. This method of use is suitable for single sequential cuts. 2. Automatic mode a) Set one cut dimension for the entire length of the input material. When the pedal starts cutting, the entire material is automatically cut to this set value. When the cut is complete, the loader will go back to the preset value of the input material length. This mode is suitable for the production of pallet cubes. The advantage is the quick changeover between values when the input material changes frequently. b) Set the desired combination of cut dimensions for the entire length of the input material. When the pedal starts cutting, the entire material is automatically cut to these length combinations. When the cut is complete, the loader will go back to the preset value of the input material length. Up to 10 programs with 10 lengths can be stored in the machine memory. Programs are very easy to overwrite, edit, insert or delete. Use this mode to achieve high material yields and is particularly useful in the production of cuttings for a wide range of packaging products. In automatic mode, automatic front and back trimming can be set. Hfsdpfx Ahsubbtkj Ujp In the basic version, the saw is LEFT orientation, i.e. the material flow is from right to left. An automatic loading system is included in the basic configuration of the saw. It is a pusher device that moves on a precision linear rail with bearings. This design ensures long life of the linear guide and very precise positioning of the workpiece in the cut. The integrated side and top pressure ensure a firm fixation of the material during the cutting process, both to the work table and to the back support. This ensures that the cut is always precise, perpendicular and avoids unwanted material movement. The clear LCD touch screen allows easy and comfortable operation of the machine. The individual controls are clearly visible, do not tire the operator's eyes and provide a perfect overview. Maximum ergonomics and designed software ensure the operator complete control over the machine. A work table at the infeed before the cut allows the operator to conveniently sort and prepare the material, which is then moved to the loading area. This eliminates downtime in the operation of the saw and strenuous material handling. The table has a tilt of 8° and is equipped with a safety flap at its end to prevent accidental pushing of the material out of the operator's reach. The basic fixed table at the outlet behind the cut is two metres long and partly under the cutting area cover. The operator can remove the cut material in complete safety, without being endangered by any cuttings, chips or risk of injury from the cutting wheel. The inclination of the table is 8°.

Condition: used, Profile spindles WEINIG 1 piece length 1100 mm 1 piece length 650 mm 2 pcs length 700 mm 2 pcs length 900 mm Hedpfx Ahsq Tn Tus Uefp

Condition: used, Technical details: length: 1000 mm width: 1100 mm height: 610 mm weight of the machine approx.: 1139 kg Drill cube material made of cast steel. Bohrwürfel Material aus Stahlguss. Hfjdpsu Nva Dofx Ah Ujp T-Nuten nach DIN 650m - Spannfläche vertikal: LxT: 1000 x 610mm - Spannfläche horizontal: LxB: 1000 x 1100mm *

Condition: used, Loader \ Suction cup manipulator System suitable for moving or loading woodworking machines such as panel saws or work centers. The panel holding system with vacuum grip allows you to handle large and heavy panels (kg 110) with extreme ease. Movable arm with 360° rotation capability Length of the mobile arm 5 m Load capacity up to 110 kg Hsdpfxow Htg Re Ah Usfp