Permanent chuck

COLCHESTER

Condition: new, Year of construction: 2025, 0330 mm 210 mm 1000 mm 167 mm 40 mm 2,2 kW Cpedpfx Aowp Tq Ujf Deu

Condition: new, Year of construction: 2026, 0330 mm 210 mm Cedpjygm Srsfx Af Djpu 1000 mm 167 mm 40 mm 2,2 kW

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Csdpfxjtr Ud Sj Af Depu Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Tailstock Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Cooling pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between tips approx. 1450 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: X1T126, spindle bore: 42 mm, turning length: 650 mm, turning diameter: 350 mm, spindle speed (max.): 3,500 rpm, controller manufacturer: Fanuc, TECHNICAL DETAILS Max. turning length: 650 mm Max. turning diameter: 350 mm Spindle bore: 42 mm Max. spindle speed: 3,500 rpm MACHINE DETAILS Control system: Fanuc Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,500 mm Weight: 1,800 kg EQUIPMENT 3-jaw chuck Multiple jaws Collet chuck Collets Steady rest Faceplate Parat tool holder Cpedsyg Hvwspfx Af Dju

Condition: excellent (used), Year of construction: 1998, travel distance X-axis: 290 mm, travel distance Z-axis: 1,920 mm, spindle motor power: 11,000 W, 3 chuck ca 400 mm Duplomatic 8 position revolver Steady rest big 400 mm Steady rets normal 300 mm Pinole taper: 6Mk Stroke pinole: 180mm Quill Ø: 95mm Length: 3300mm Width: 1800mm Height: 1700mm Weight: 4000kg Csdpfjyfd Hwjx Af Djpu Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,000 h, spindle speed (max.): 2,500 rpm, overall weight: 1,800 kg, This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine. • Control: Conventional with lead screw and infinitely variable speed adjustment • Readouts: Digital display for axes and digital spindle speed display • Operating hours: No counter; estimated 5,000–7,000 h • Turning diameter: 400 mm • Center height: 195 mm • Bed width: 1270 mm Cedex D Nwdopfx Af Djpu • Toolpost: MultiFix quick-change tool holder Additional equipment • 3x three-jaw chucks • 3 sets of claw jaws • Chuck wrench • Manual/operating instructions • Work area lamp • Digital dial indicator • 4 MultiFix tool holders • Various turning tools • Drill chuck (keyless) for tailstock • Coolant pump

Condition: good (used), turning diameter over cross slide: 267 mm, turning diameter: 432 mm, center width: 1,500 mm, 3-jaw chuck diameter 250mm tool holder device tail stock steady rest coolant device Technische Daten / technical details: Spitzenweite / center to center 1500 mm Dreh-Ø über Bett / turning diameter over bed 432 mm Dreh-Ø über Schlitten / turning diameter over sledge 267 mm Dreh-Ø über Kröpfung/ turning diameter in the gap 710 mm Spindelbohrung / spindle hole 76 mm Drehzahlbereich / spindle speed 20-1600 UpM /rpm Antriebsleistung / drive capacity 9,3 kW Gewicht der Maschine ca. / weight ca. 2310 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Cedpjtq Exrjfx Af Dspu Technical data, accessories and description of the machine are not binding.

Condition: refurbished (used), Straight Bed Machine Distance between centers: 50" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse 3 and 4 jaw chuck and face plate Coolant 2 axis DRO Main motor: 7.5 hp Machine in good condition Approx weight: 1.5 tons Cjdpfx Ajv I Ddqef Depu Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Codpsq N Ay Asfx Af Depu Tool Post: Quick Change 4 holders & Keys New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC 6-month warranty

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Cpedpfxonr Nl So Af Dju Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard