4500 ton Chen Hsong SM4500-TP (2013) Supermaster Servo drive series

Chen Hsong SM4500-TP

Condition: excellent (used), Year of construction: 1992, Boy 30 T2 Closing 30 tons Redpfxjuh U Izs Abwsr Year 1992 Scrow 32 Spray weighted 123g

Condition: used, Year of construction: 2005, operating hours: 62,235 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 25,100 kg, The ENGEL Victory 2050/350 is a tie-bar-less injection molding machine manufactured in 2005. With a machine weight of 25,100 kg, it offers a maximum shot volume of 1,145 cm³ and a maximum injection pressure of 1,482 bar. The clamping force is 350 tons and the screw diameter is 70 mm. Technical data at a glance: - Year of construction: 2005 - Machine weight: 25,100 kg - Maximum shot volume: 1,145 cm³ - Maximum injection pressure: 1,482 bar - Clamping force: 350 t Redpjvxzw Njfx Abwer - Screw diameter: 70 mm - Tool installation height: 350–1,000 mm - Clamping plate size: max. 1,200 x 1,100 mm - Ejector stroke: max. 250 mm - Control system: ENGEL - Total operating hours: 62,235 h - Additional equipment: - MORETTO Hopper Loader R10 C52 dosing device - ENGEL ERC linear handling system - Longitudinal structure - Removal cell with machine housing - Separating cardboard feeder - Two-stage roller conveyor The tie-bar-less design of the ENGEL Victory series enables free access to the tool area, which allows the use of larger tools on smaller machines, thus increasing efficiency. This design also offers advantages in automation, as robots and peripherals can be more easily integrated. The machine is equipped with the ENGEL control system, which is known for its intuitive operation and precise process control. The servo-hydraulic technology ensures energy-efficient operation and reduces the need for cooling water. In addition, the machine has a MORETTO dosing device and an ENGEL linear handling system, which supports production automation and increases overall productivity. With a total of 62,235 operating hours, the machine is in a used but functional condition.

Condition: excellent (used), Year of construction: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with robot Clamping unit Parameter Value Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Tie bar spacing (W × H) 1,120 × 1,000 mm Min. / Max. mould height 500 – 1,050 mm Maximum distance between platens 2,080 mm Mould opening stroke 1,030 mm Rodewy U E Uspfx Abwsr Ejector stroke 350 mm Ejector force 139 kN Maximum mould weight 7,200 kg Injection unit Parameter Value Screw diameter 130 mm Injection volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio (screw length/diameter) 20 Electrical-hydraulic equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions and weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (auxiliary equipment)

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Rsdpfx Aoub S R Hjbwsr Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: good (used), travel distance X-axis: 1,080 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, In working condition Rjdpfoylvb Hex Abwer

Condition: ready for operation (used), Year of construction: 2001, Injection Unit Screw diameter 55 mm Rodpfox D Ecvsx Abwer Clamping Unit Clamping force 2500 kN This Engel ES 1050/250 HL-V was manufactured in 2001. It features a screw diameter of 55 mm, clamping force of 2500 kN, and an opening stroke of 850 mm. The tool mounting platen measures 1050 x 650 mm, and it includes a robot. Consider the opportunity to buy this Engel ES 1050/250 HL-V hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding