Two-Component Injection Molding Machine

BOY Boy 100E 2K

Condition: good (used), Year of construction: 2000, Capacity Kg 15000 Table Length 400 mm Table Width 300 mm Hole in table 150 mm Working height 280 mm Throat 2170 mm Stroke 50 mm Ram adjustment 4 - 80 mm Hydraulic Clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Length:1500mm Width:1500mm Height:2100mm Weight:1500kg Godpfx Aoyc R Uioglekd Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 12501, functionality: fully functional, pressing force: 10 t, table width: 222 mm, table length: 322 mm, overall weight: 450 kg, installation height: 197 mm, ram adjustment: 30 mm, stroke adjustment: 42 mm, Used San Giacomo eccentric press T 10V CE in very good condition, with a base frame for pallet truck transport. Further details available upon request. Gedpfx Agjx A Ah Tjlekd

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm Gkodpfx Agovfhp Solod stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: used, Year of construction: 1987, pressure 40 t Gkodpfx Agjvu E Iwslod no. of strokes 500 Hub/min total power requirement 5,5 kW

Condition: good (used), Year of construction: 1998, machine/vehicle number: A 2147, Offer 23353 Hydraulic Welding Turntable and Tilting Table – Three Axes – Welding Manipulator Technical Data: - Max. load capacity: 750 kg - Face plate diameter: 700 mm - Min. table height (horizontal position): approx. 750 mm - Max. table height (horizontal position): approx. 1390 mm - Working height manually adjustable in 3 steps - Face plate motorized, rotatable and tiltable - Rotational movement electrically infinitely variable: approx. 0.01 – 2.0 rpm - Right– and left–hand rotation - Welding current transmission: approx. 700 A - Drive: 400 V - Connected load: 1.5 kW - Handheld remote control for rotation direction, swiveling and tilting Gkedpfxey Hq Ulj Agljd - Electrical foot switch - Space requirement: approx. W 1500 x H 750 x D 900 mm - Weight: approx. 700 kg

Condition: excellent (used), machine/vehicle number: 4868, functionality: fully functional, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight with motor, without base: 245-295 kg Net weight of standard pedestal (base): 95 kg Customs classification: 8462.9930 Gkedpfx Agew T S Tzjled TECHNICAL SPECIFICATIONS TYPE D-8 / D8-200: Maximum capacity: 8 tons Maximum cutting section for Rc=40 kg/mm²: 200 mm² Standard fixed stroke: 20 mm Variable stroke, standard range: 4-36 mm Variable stroke, extra-large range: 8-50 mm Maximum height between table (without plate) and ram: 220 mm Thickness of movable plate: 42 mm Standard opening in the plate, diameter: 50 mm Opening in the table, diameter: 60 mm Ram bore, diameter x depth: 38x60 mm Ram adjustment (tie rod extension): 70 mm Ram base surface (width x depth): 105x90 mm Required power, HP: 1/3 Flywheel dimensions, diameter x width: 410x85 mm Standard flywheel speed: 180 RPM TECHNICAL SPECIFICATIONS TYPE D-8: Distance from ram center to frame: 100 mm Distance between frame columns: 170 mm Table surface, width x depth: 270x190 mm TECHNICAL SPECIFICATIONS TYPE D8-200: Distance from ram center to frame: 200 mm Distance between frame columns: 160 mm Table surface, width x depth: 270x300 mm Unless otherwise stated, these technical specifications are provided without engagement and subject to possible error or omission.

Year of construction: 2006, condition: reconditioned (used), TECHNICAL FEATURES: Press Model: T35 TL/V-SM Serial number: 11970306 Year of construction: 2006 Nominal force: kN 350 Test date: 23/05/06 Adjustable stroke: mm 11÷78 Strokes per minute: n°122 Slide adjustment: mm 50 Light at bottom dead centre: mm 275 Max. grafts per minute: n°35 Max revs flywheel: n°122 Weight: 2,700 kg Min. air pressure: 6.5 bar Clutch pressure: 5.5/6.0 bar Braking angle: 55° Stopping time: 247 ms Gkodpfx Agsmhhdbjljd Max. mold dimensions: B=280 x L=240 x H=180 Max. moving part weight: Kg 40 Nominal pressure: KN 350 at 2mm at 120 strokes/min Machine Stop: TDC (Top Dead Center) Complete with user manual and CE conformity Six (6) months warranty excluding electronic parts. NEW COMPONENTS INSTALLED: • Front safety guard with safety keys.

Condition: used, functionality: fully functional, Year of construction: 1980, machine/vehicle number: D02L/7983, Offer Number: D02L/7983 Gkjdewi Sx Repfx Aglod Machinetype: decoiler (motorized) Info: horizontal Make: WAFIOS Type: AHL2 Constr. year: 1980 max. coil diameter: 1000 mm carrying weight: 150 kg Location: In our warehouse

Condition: used, Year of construction: 1983, pressure 25 t Gedpfx Aoumm Swsgljkd throat 225 mm stroke 8 - 85 mm table size 560 x 450 mm ram head dimension 360 x 220 mm ram adjustment 55 mm no. of strokes 80 - 160 Hub/min total power requirement kW weight of the machine ca. 2500 kg dimensions of the machine ca. 1,135 x 1,365 x 2,145 m

Condition: good (used), Strapping machine, packaging machine, strapping machine, skin pack machine, pallet wrapper, geared motor with reel Gkedpomhmxbefx Aglsd -Manufacturer: Nord, gear motor with reel from packaging machine Tiromat Compact M420 -Transmission: Nord 1 S32F F i= 5.40 -Motor: Nord SK1S32F 0-750 rpm / 0-139 rpm -Number: 2x reel unit available / 1x left 1x right -price: per piece -Total dimensions: 520/460/H360 mm each -Weight: 19 kg/pc.