Notching Machine

BOSCHERT K30 -120

Year of construction: 1994, condition: excellent (used), Hydraulic notching machine Fab. BOSCHERT Type. K30-120 Very good condition, year 1994 Technical data Make BOSCHERT Type: K30-120 Year of manufacture: 1994 cutting capacity: 6 mm in St 40 / 4 mm in Niro blade length: 200 mm cutting angle: 30-120 working stroke: 40 mm table height: 900 mm Nwjdpfx Afehygzts Ssr Connected load: 6 kVA weight: approx. 1600 kg dimensions: approx. 1500 x 1200 x 1300 mm All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t Nwjdpsg Ip Efefx Af Ser cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 6 mm, power: 0.004 kW (0.01 HP), overall weight: 1,600 kg, Cutting 6 mm at 400 N/mm² Nsdpfx Aexrylbef Sewr 4 mm at 600 N/mm² Stepless angle adjustment 30 - 120° Drive power approx. 4 kW

Condition: good (used), functionality: fully functional, Year of construction: 1989, sheet thickness steel (max.): 6 mm, table height: 900 mm, power: 4 kW (5.44 HP), overall weight: 2,150 kg, total length: 1,550 mm, total width: 1,200 mm, total height: 1,350 mm, cutting length (max.): 200 mm, Hydraulic notching machine, adjustable angle 30-120°, cutting capacity 6 mm, cutting length 200 mm, punching station on the back siede, footpedal, accessoires Nsdpfx Aevkg Nuof Sewr

Year of construction: 1990, condition: good (used), machine/vehicle number: V 254xxx, Lg. no. 22462 Nodpfxoiluqmo Af Sjwr Technical data: - Cutting length 250 mm - cutting angle 90 ° - Cutting thickness - mild steel up to 4 mm - Stainless steel up to 3 mm - Aluminum up to 5 mm - stroke rate up to approx. 55 /min - table size W 800 x D 800 mm - working height approx. 940 mm - stops steplessly adjustable in length and degrees - drive 400 V / 4 kW - oil filling 50 l - E - foot switch - space requirement approx. W 800 x H 1250 x D 900 mm - weight approx. 700 kg

Condition: used, Year of construction: 1989, Used notching machine from Boschert Model: K 30 120 Nsdsw Rvk Espfx Af Sewr Adjustable angle Pneumatic clamping of the corner Year of manufacture: 1989

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad Nwsdpfxoxabpdo Af Ssr blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg range L-W-H 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Condition: new, PILOUS Double miter band saw ARG 260 plus E Incl. special accessories: driven chip brush, band tension indicator. Cutting range: Round:90° -45° +45° +60° in mm.260-180-200-125 Square:90°-45°+45° +60° in mm. 240-160-185-105 Nwedsilqd Nepfx Af Sor Rectangle:90°-45°+45° +60° in mm. in mm.300 x 185-190 x 105-185 x 295-125 x 105 Main motor 400 V, 50 Hz, 1.4 kW Pump motor 400 V, 50 Hz, 0.05 kW Saw blade speed 35/70 m/min. saw blade length 2880 x 27 x 0,9 mm Working height from vice 900 mm Coolant tank approx. 15 l Machine dimensions (min.) 1690 x 750 x 1430 mm Machine dimensions (max.) 1980 x 1510 x 2040 mm Machine weight 310 kg

Year of construction: 1996, condition: good (used), machine/vehicle number: 598, Offer 22391 Technical data: - Cutting length up to 200 mm - Cutting thickness - steel with 400N/mm² strength 6 mm - stainless steel with 600 N/mm² strength 4 mm Nwodpfsiqgd Ejx Af Ser - stepless cutting angle adjustment 30 - 120 ° - pneumatically clamped - automatic cutting gap adjustment - locking stops left + right 300 mm each - table support surface 1000 x 800 mm - with T-slots and depth stops - table height approx. 900 mm - depth stops - drive 400 V / 4 kW - E - foot switch - space requirement approx. W 1000 x H 1350 x D 1510 mm - Weight approx. 1800 kg

Condition: excellent (used), Year of construction: 1998, sheet thickness steel (max.): 6 mm, table height: 900 mm, overall weight: 1,550 kg, total length: 1,500 mm, total width: 1,200 mm, total height: 1,250 mm, cutting length (max.): 200 mm, Hydraulic corner shear with infinitely adjustable angle between 30 and 120 degrees. Capacity St 40 max. 200 x 200 x 6 mm, Rvs 200 x 200 x 4 mm. Equipped with 2 stops with degree graduation and foot pedal for operation. Nwedowqfwcepfx Af Ser