Flanging machine

BIESSE ARTECH AKRON 430 A T

Condition: used, machine/vehicle number: 007848, Type of edging: Thin edge, Thick edge, Solid wood Gksdpowkrqpsfx Aglsd Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008357, Max. panel width: 4400 mm Max. panel length: 4300 mm Main saw blade projection: 75 mm No of Grippers: 9 Gedpjx A Tk Ejfx Aglekd

Condition: as good as new (ex-display), Year of construction: 2026, CNC machining centers Rover Multi Up M C S - exhibition model - Work area *: X = 3280 mm; Y = from 1580 to 1660 mm, according to the working conditions Z = 200 mm - 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm - 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece passage *: Y = 1900 mm Axis travels *: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 work areas and 2 clamping areas in X. AUXILIARY VACUUM SYSTEM - 2 areas It enables the clamping of workpieces by means of vacuum templates. Remote control RM850 Rover Multi Up M C S Panel - Multi Purpose Regular Gjdpfxsy Ehrxj Agljkd Configuration 2 Compatible with the revolving tool magazine with 16 slots and the side tool magazine with 12 slots. The tool magazines can also be retrofitted. Uninterruptible power supply (UPS) for the machine PC. 6 ATS workpiece supports - 18 module carriers — 6 aluminum workpiece supports. The guidance of the workpiece supports is on linear guides with ball circulation slide blocks. The clamping is done on the front and rear linear guide by means of pneumatic cylinders. The clamping is released by a push button, which is attached to the front of the workpiece support. — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping The vacuum modules can be rotated by 15° on the module carriers; an ideal solution for molded parts. — 18 closures for the module carriers without template. Work table SA (Set-Up Assistant) for work tables up to 1550 mm. Supported manual positioning system with direction of travel indicator and position indicator. — Sensors on each work table and along the X axis of the work area. — Display of the direction and position reached for the carriage in the positioning phase, mounted on each work table The system, according to the programming of the work tables, suggests the direction of movement of each work table and carriage to the operator and indicates the position reached with a green LED and a beep, with an error of +/- 1.5 mm. Division of the pneumatic system into 2 work areas in X. Machining unit with 5 interpolating axes 13 kWp (17.4 PS), with HSK F63 adapter, liquid-cooled - 20,000 RPM. Extraction hood with 12 NC-controlled positions for the electrospindle with 5 axes. Flange for the preparation of a machining unit with 5 interpolating axes for the mounting of aggregates. Coolant system Additional Z-axis support for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 slots in the machine bed. Revolving tool magazine with 16 slots, installed directly on the machining unit X. Tool holder HSK F63, equipped with a long integrated flange, for saw blades on a 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of the standard PC with a powerful PC. Digital devices for measuring tool length with diameter up to 130 mm. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter Suction proposal 5-axis simultaneous Material removal simulation 12 months warranty period Location: in stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Gjdpjv R Nk Uefx Aglekd Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 2013, Edge thickness Roll 0.4/3 mm / Straps 0,4/22 mm Workpiece thickness 10-65 mm Gksdpfou Hldmsx Agljd Workpiece overhang 140 mm Feed sppeds 10-14-18-20 m/min Equipped with Twin edge milling unit Gluing unit Snipping unit Rough trimming unit Fine trimming unit Profile trimming unit Universal trimming unit Flat scraping unit Edge buffing unit " Sintra " control unit Dimensions (l x w x h) approx. 7000 x 1400 x 2100 mm Weight approx. 3600 kg Machine number 94391 Year of construction 2013 CE

Condition: used, machine/vehicle number: 008550, X axis working area: 4300 mm Y axis working area: 2205 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 28 Godpfez Eyycsx Aglokd Total number of tool changer positions: 16

Condition: used, Year of construction: 2016, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel range X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Work table TV with 10 supports, L=1500 4 working areas 2 cross lasers Gkedpfey Dta Sox Agljd Vacuum pump 250 m³/h PC control, Windows Vertical milling unit ISO 30, 7.5 kW with tool changer RAPID 14 and vector axis Additional drilling unit (E-axis) Dongle for XILOG software Storage location: Sonnefeld

Condition: used, Year of construction: 2014, Used Machine Year of Manufacture: 2014 Features and Technical Specifications: - X-axis working range: 3,740 mm - Y-axis working range: 1,570 mm - Z-axis travel: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional locking mechanism for the C-axis - Tool change stations: 24 with turret changer; 10 on the left side of the machine column - Vertical drilling spindles: 12 - Machine table: cantilever table - Automatic table positioning: available Gkjdpfx Agozlbp Uelod - 6 e-motion workpiece supports - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for alternating setup - With automatic central lubrication - With mobile control console featuring a PC monitor - With air conditioning for the control cabinet - With a 90 m³/h vacuum pump - With handheld control unit - Includes: 12 frame clamps, 8 large and 4 medium suction cups

Condition: good (used), Code: 0412 Brand: ORMAMACCHINE Model: NPC/R 35/13 - CE Standard Hydraulic hot press for joinery, furniture, bespoke furnishings, veneering, panels, doors, wooden joinery, composite materials and miscellaneous items – CE Standard Sturdy construction Gkjdpfx Ags Ab T Rtolsd Solid perforated steel platens 3500 x 1300 mm Fixed lower plate – Movable upper plate Plate thickness 80 mm 6 pistons diameter mm 85 Total thrust 120 ton Option for either oil or steam heating Installed power 8 Kw Overall dimensions mm 4500 x 1550 x 2700 h Weight kg 10000

Condition: used, Year of manufacture: 2015 Colour: White Weight: 4.000 kg - Year: 2015 - Documentation available: Yes - CE marking present: Yes - Serial number: AE/034421 - Main motor power [kW]: 9.0 - Software: Wincut 12.2.9 - Saw blade bore diameter [mm]: 80 - Max. saw blade diameter [mm]: 320 - Max. cutting length [mm]: 3800 - Max. cutting width [mm]: 3800 - Max. cutting height [mm]: 67 - Spindle speed: - └ Min. spindle speed [rpm]: 1000 - └ Max. spindle speed [rpm]: 5000 - └ Spindle speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 21 Gsdpfx Agjzzb I Nolokd - Fuse [A]: 32 - Power [kW]: 8.4 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels