5 Axis CNC Routers

BIESSE ROVER B FT 2243

Condition: used, machine/vehicle number: 008470, X axis working area: 4300 mm Y axis working area: 2205 mm Gkedpfx Aoyzyrvjgled Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 46 Total number of tool changer positions: 22

Condition: as good as new (ex-display), Year of construction: 2026, CNC machining centers Rover Multi Up M C S - exhibition model - Godoy Ehrxopfx Agljkd Work area *: X = 3280 mm; Y = from 1580 to 1660 mm, according to the working conditions Z = 200 mm - 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm - 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece passage *: Y = 1900 mm Axis travels *: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 work areas and 2 clamping areas in X. AUXILIARY VACUUM SYSTEM - 2 areas It enables the clamping of workpieces by means of vacuum templates. Remote control RM850 Rover Multi Up M C S Panel - Multi Purpose Regular Configuration 2 Compatible with the revolving tool magazine with 16 slots and the side tool magazine with 12 slots. The tool magazines can also be retrofitted. Uninterruptible power supply (UPS) for the machine PC. 6 ATS workpiece supports - 18 module carriers — 6 aluminum workpiece supports. The guidance of the workpiece supports is on linear guides with ball circulation slide blocks. The clamping is done on the front and rear linear guide by means of pneumatic cylinders. The clamping is released by a push button, which is attached to the front of the workpiece support. — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping The vacuum modules can be rotated by 15° on the module carriers; an ideal solution for molded parts. — 18 closures for the module carriers without template. Work table SA (Set-Up Assistant) for work tables up to 1550 mm. Supported manual positioning system with direction of travel indicator and position indicator. — Sensors on each work table and along the X axis of the work area. — Display of the direction and position reached for the carriage in the positioning phase, mounted on each work table The system, according to the programming of the work tables, suggests the direction of movement of each work table and carriage to the operator and indicates the position reached with a green LED and a beep, with an error of +/- 1.5 mm. Division of the pneumatic system into 2 work areas in X. Machining unit with 5 interpolating axes 13 kWp (17.4 PS), with HSK F63 adapter, liquid-cooled - 20,000 RPM. Extraction hood with 12 NC-controlled positions for the electrospindle with 5 axes. Flange for the preparation of a machining unit with 5 interpolating axes for the mounting of aggregates. Coolant system Additional Z-axis support for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 slots in the machine bed. Revolving tool magazine with 16 slots, installed directly on the machining unit X. Tool holder HSK F63, equipped with a long integrated flange, for saw blades on a 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of the standard PC with a powerful PC. Digital devices for measuring tool length with diameter up to 130 mm. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter Suction proposal 5-axis simultaneous Material removal simulation 12 months warranty period Location: in stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working area X: 4300 mm Working area Y: 2205 mm Z-axis workpiece passage: 250 mm 1 x 19.2 kW 4-axis electrospindle, HSK F63 connection 1 x 19.2 kW 3-axis electrospindle, HSK F63 connection 8-position turret-type tool changer “FT” work table with grid Software: Biesse bSolid Gkodo Abawgspfx Agled 3 vacuum pumps Cooling system Special extraction hood with 2 extraction connections Safety guards

Condition: good (used), Year of construction: 2013, Edge thickness Roll 0.4/3 mm / Straps 0,4/22 mm Workpiece thickness 10-65 mm Workpiece overhang 140 mm Feed sppeds 10-14-18-20 m/min Equipped with Twin edge milling unit Gluing unit Snipping unit Rough trimming unit Fine trimming unit Profile trimming unit Universal trimming unit Flat scraping unit Edge buffing unit " Sintra " control unit Dimensions (l x w x h) approx. 7000 x 1400 x 2100 mm Weight approx. 3600 kg Gjdpfx Agsu Hldmsljkd Machine number 94391 Year of construction 2013 CE

Condition: excellent (used), 4-SIDED SIZING-SHAPING LINE (currently for Internal Doors). Composed by of the following machines: X10023A) Motorized infeed rollers table "CELASCHI"" Gjdpjwzmbqefx Aglskd X10023B) Double End Tenoner "CELASCHI" Mod. TSA 3 B 480 A Installed power KW 65 X10023C) 90° Motorized Transfer ("L-shape") conveyor "CELASCHI" Mod. X10023D) Double End Tenoner "CELASCHI"" Mod. TSA 2 B 360 Installed power KW 60

Condition: used, Year of construction: 2009, Used BIESSE ARTECH edge bander, model Akron 430 A T Technical data: - Minimum/maximum panel length: 140-3200 mm - Minimum/maximum panel width: 85-3200 mm - Minimum/maximum panel thickness: 10-60 mm - Minimum/maximum edge thickness (rolls): 0.4-3 mm - Minimum/maximum edge thickness (strips): 0.4-8 mm - Minimum/maximum edge height: 14-64 mm - Working height: 900 mm - Panel protrusion from feed track: 25 mm - Feed track speed: 12 m/min - Dust extraction air speed: 30 m/sec - Supply air pressure: 7-10 bar SINTRA LT control Entry guide with mechanical viewer -Trimming unit: 2 motors, 1.8 kW each, with pad followers Vertical adjustment for tool position -Gluing unit: glue pot capacity 2 kg 3 air-operated pressure rollers Digital edge thickness viewer -Shear unit with 2 push pressure positions depending on edge thickness -Automatic strip edge loader -End trimming unit: 2 motors, 0.50 kW each, with pad followers, 2 selectable cutting angles (0°-15°) automatically adjustable from control panel (to increase edge overhang or trim for best finishing) -Multifunction corner rounding unit with 4 selectable positions from control panel Possible operations: straight, bevel, radius1, radius2 For each finishing position, +/- edge overhang can be selected -Edge scraper unit -Glue scraper unit Program creation for different finishing options Machine length: 3880 mm Weight: 1530 kg Gkodpfx Agoyt Nvgslsd

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Working area X: 3855 mm Working area Y: 1650 mm Z-axis workpiece clearance: 245/290 mm Godsz Hxmqjpfx Aglokd 5-axis electrospindle, HSK F63 mounting Main electrospindle power: 16 kW Drilling spindles for vertical drilling: 5 Drilling spindles for horizontal drilling X: 2 Drilling spindles for horizontal drilling Y: 2 22-position chain-type tool changer Work table with 8 rails Automatic EPS tables Software: Biesse bSolid Vacuum pump with a capacity of 250 m3/h Chip conveyor belt Safety guards Safety device compliant with CE standards, with impact bar and double light curtain Approximate weight: 5800 kg Only 2774 operating hours Includes Uniclamps for window and door frames Available immediately

Condition: excellent (used), Year of construction: 2014, Tilting table with air cushion Maximum glass size: 6000 x 3300 mm In very good and clean condition Gkodpfx Agsy Nagcoljd Good working order, tested As is Available immediately

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: CE marking, documentation/manual, Holz-Her Sprint 1317 Edge Banding Machine Manufacturer: Holz-Her Model: Sprint 1317 Year of Manufacture: 2007 Equipment • Pre-milling unit • Gluing unit • Roller magazine for roller edges • Automatic trimming • Multi-milling unit (flush trimming / radius milling / chamfering) • Corner rounding unit • Profile scraping blade • Surface scraping blade • Polishing unit • Automatic unit adjustment • Control panel with operating panel • 400 V connection Technical Data • Workpiece height up to 60 mm • Roller edges up to 3 mm • Edges up to 8 mm • Feed rate up to 18 m/min • Minimum workpiece length 180 mm • Minimum workpiece width 60 mm Description For sale is a Holz-Her Sprint 1317 edge banding machine in very good condition. Gkedpfjz R A U Iox Agled The machine has extensive equipment for professional edge processing and impresses with its robust construction and precise processing results. Processing sequence • Pre-milling • Glue application • Roller edge banding • Automatic trimming • Flush and radius milling • Corner rounding • Profile scraping blade • Surface scraping blade • Polishing The machine was in use until recently and can be inspected by appointment.

Condition: used, Year of construction: 2021, Vertical panel dividing saw Manufacturer: Felder Format4 Type: Kappa V80 Year of manufacture: 2021 Technical data Saw unit Motor with 5.5 kW power Saw blade diameter: 300 mm Cutting depth: 80 mm Gkjdjzuy Dvepfx Agled Cutting length: 5300 mm Cutting height: 2200 mm Maximum horizontal cut: 2080 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.