Single Edgebanders

BIESSE STREAM A

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Duedpewlbxlsfx Adwer Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: excellent (used), Year of construction: 2011, Used horizontal panel saw Djdpfx Adsymx S Dewsur Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rail (double track): 9 pieces Clamps: 7 pieces, first 3 are 2-fingered Air cushion table, width 650 mm: 4 pieces, each 2160 mm long Central blower: 1 unit with increased air output - 3 angled lift clamps (2-fingered) - 1 angled lift clamp (1-fingered) - 1st air cushion table: 800 mm wide - Speed package: -> Saw carriage feed: 1 – 150 m/min Technical specifications: Blade projection: 95 mm Saw carriage feed: forwards 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle pressure device, min. pressure width 0 mm; max. pressure width full cutting length Main saw motor: 18 kW, frequency controlled Scorer saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection value with HS motor 18 kW: 28 kW Power Control CADmatic 4.0 control unit with 17" flat display Labeling with part graphics / label software / label printer PICA 104

Condition: used, machine/vehicle number: 008030, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR, Hot Air Premilling Unit: yes Djdpjwvq Hgjfx Adweur Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: excellent (used), Biesse Stream 5.5 A Edgebander Mileage: 246,000 m Top pressure belt, fluids Pre-milling cutters, Glue application, Pre-melter for PUR adhesive The glue pot is equipped with a glue drain Pneumatic pre-cut guillotine, Pressure rollers fluids Flush trim saws, Top and bottom trimming unit with straight cutters Top and bottom multi-cutter trimming unit Duedpfx Adjxxlqvowor Two corner rounding units Fluids Profile scraper (multi R1-R2), Cleaning fluids Flat scraper, Polishing unit, The machine is equipped with NC control for routers and a pneumatic package, Max workpiece height 60 mm, Max edge banding thickness in roll: 3 mm, Feed rate: 12, 18 and up to 20 m/min The machine is in very good condition.

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Dedpfx Ajxranpodwour Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Panel height: 60 mm Edge thickness (roll): 3 mm Edge thickness (strip): 12 mm Panel length: 3200 mm Dodjx Nav Repfx Adwour Calibrating unit End trimming unit Overlapping trimming unit RS-502 Chamfering unit RF100 Rounding unit with two motors Edge scraper unit Glue scraper unit Brushes unit Blower/Hot air unit SMART TOUCH 23" control

Condition: used, Year of construction: 2019, Smart Touch Numerical Control with Sintra HD Software Panel height 10 - 60 mm 22 mm solid wood Pvc / Abs mm 3 Feed speed up to 25 meters / min Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Motorized and electronically adjustable panel support guide by C.N. Side roller conveyor with idle wheels for panel support ADZ-700 anti-adhesive group Rectifier unit with 2 electronically adjustable motors by C.N FI-502 Lamps to heat the edge of the AdIRL-700 panel Reel holder plate at 1 position Gluing unit for EVA hot melt glue with QM-705 glue pot Additional glue tank Duodpfx Ador Ip Sdswer Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. Anti-adhesive group End trimming unit with 2 IN-801 motors Offset trimming / gleaning unit with 2 motors electronically adjustable by C.N RF400 PRO-NESTING KIT for gleaning unit Non-stick group Rounding unit with 2 multifunction motors (gleaner + rounder) AR30 NC LPT-700 non-stick liquid application system Electronic edge scraper unit electronically adjustable by C.N RB400 PRO-NESTING KIT for edge scraper group RCC-701 glue scraper unit Brush group "SP-501" "PH-700" hairdryer group

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, cutting height (max.): 90 mm, cutting width (max.): 3,800 mm, saw blade diameter: 380 mm, overall weight: 4,400 kg, cutting length (max.): 3,800 mm, main saw diameter: 380 mm, Beamsaw SIGMA IMPACT 90 (SCM Group) suitable for furniture panels precize cutting by one or more panels overlapped. Manufacturer: SCM Group Model: Sigma Impact 90 Production year: 2017 Cutting width: 3.800 mm Cutting depth: 3.200 mm Max. cutting height: 90 mm Front tables (air cushion): 1x 2.500x600mm, 3x 2.500x600mm Duodpfxox Nc Ayo Adwer Machine basement with air-cushion. Max. main blade diameter: 380 mm Scorer diameter: max. 300 mm PUSHER: brushless motor, max. speed 120 m/min ! SAW CARRIAGE: brushless motor, max. speed 150 m/min ! THK linear guides for the saw carriage movement. THK linear guides for the PUSHER movement. Automatic centralized lubrication of THK linear guides. Hi-Tronic kit: - main motor 15 kW (mode S6) - vertical movement of main and scoring blade by price ball-screws - optimized stroke of the main blade - electronic scorer adjustment in 2 axis (vertical, horizontal) - grooving with the main blade (electronic depth adjustment) - postforming cuts - window cut outs (blind cuts) - AKE flange for main and scoring blade Quantity of clamps (grippers): 10 pcs (maximum) Automatic exclusion of the clamp acting on the panels edge (up to 800 mm width). Start/stop pedal. Label printer. Control SW: WINCUT Optimalisation program: OTTIMO PERFECT CUT TOP (1x HW key) Control PC Eye-S: Windows + LCD touch screen 21" Air conditioning device for the electric box. Panel´s dimension automatic measuring. Laser line for the visualisation of the cutting line. Automatic double side aligner - motorized (60-2.200 mm). Machine stat: fully working Possibility to see in actuall production. Availability: cca April 2026

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Dusdpfsv R Nk Uex Adwjr Heat-up time at half fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Condition: used, machine/vehicle number: 005657, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Duodpfx Aowcx Tuedwer Operating Units: 13 nr