Circular saw machine

Berlett KS 60

Condition: used, Kuka KRC4 KR 60 L30-4 KS incl. / incl. Kuka KR C4 and control panel 00-168-334 Ymkipxe8U Payload: 30 kg Range: 2628 mm Year of manufacture: 12/2017 Software and data sheet are included / Software and data sheet are included   Condition DE: used and checked, removed from ongoing operations EN: used and checked, removed from ongoing operations

Condition: used, Micrometer screw, outside micrometer screw, precision micrometer screw -Manufacturer: KS, Micrometer: Precision micrometer screw -Measuring range: 500-600 mm Cfoe7Jteeg -Reading: 0.01 mm -Locking device -Standard: TGL 150 46 -other sizes: also available -Dimensions box: 880/545/H50 mm -Weight: 6.2 kg

Condition: new, Hydraulic workshop press HIDROLIKSAN HD 60 Technical specifications Pressure 60 t stroke 400 mm Clear column width 820mm Working speed 5,0 mm/sec Hssj7Jf Retracting speed 9,4 mm/sec Engine power 3 kW Machine weight approx. 700 kg. Space requirement approx. L.W.H. 1460 x 850 x 2400 mm Equipment: Hydraulic workshop press with horizontally movable cylinder motor hydraulic and additional hand lever height adjustable table V-block tool insert pressure gauge

Condition: like new (used), Year of construction: 2017, Technical data: Working length: 1270 mm Distance between the columns: 1000 mm Bjo2Sj3P2C Pressing force: 60 to CNC control: CYBELEC ModEva Controlled axes: Y1 / Y2; X; R Number of stop fingers 2 pcs. Stroke: 275 mm Motor power: 7.5 kW Working height: 920 mm Light barrier: FIESSLER CE mark Dimensions (length x width x height): approx. 3250 x 2500 x 2600 mm Weight: approx. 4.5 tons Accessories: 1 set of tools Condition: as good as new, very little used Machine comes from a vocational school

Condition: good (used), Functionality: fully functional, MKS Instruments. Inc. plasma generator, AX7670 60 R, ASTRONi Model: AX767060R Type: ASTRONi 200-208V AC 50/60Hz 30A Brshjfy8Vpw

Year of construction: 2011, Condition: like new (used), Universal Grinding Machine from Chevalier apply for toolmaker , mold maker, education and Locksmith Pressure: 60.0 t Square steel: 35.0 mm Pressure: 60.0 t Y0798Jol Square steel: 35.0 mm Angle steel: 120x120x12 mm Round steel: 40.0 mm Punching cross-section in qmm: Ø28 in 15 / Ø38 in 11 mm Throat: 220 mm Flat steel: 200x20 / 300x15 mm Blade length: 317 mm Oil capacity: 45,0 ltr. Working height: 940 / 1140 mm Strokes per minute: max. 26 Working stroke: 55,0 mm Total power requirement: 4.0 kW Machine weight approx.: 1425 kg. Dimension HxWxD: 1510 x 590 x 1570 mm

Condition: new, pressure 60 t stroke 400 mm daylight longitudinal/sideways 820 x 300 mm Brnxbsr0P7 dayligth 900 mm liter capacity 6,0 l feed down 5,4 mm/sec feed up 8,3 mm/sec Motor output 3,0 kW weight of the machine ca. 0,725 t dimensions of the machine ca. 1,46 x 0,85 x 2,4 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking 2 year guarantee

Condition: new, pressure: 60stroke: 250total power requirements: 4weight approx.: 800messurements (LxWxH): 1.710 x 700 x 2.100 Etbjw8N

Condition: used, Linear bearing, linear rail, linear guide, roller guide rail, without guide carriage, guide rail, curved guide Bnytywr -Manufacturer: THK / SNR, arch guide with guide carriage -Type: HCR35A2RR 60 / 1000R -Length: 1000 mm -Quantity: 1 piece -Price per piece -Dimension package: 1180/240 / H100 mm -Weight: 12.5 kg

Condition: new, Year of construction: 2025, operating hours: 6 h, ready produced Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight Bst09Lehrk * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, pressure: 60Column clearance: 900 x 300stroke: 400daylight: 900motor power: 3Speed : 8Speed : 13messurements (LxWxH): 1500 x 850 x 2450Standard Equipment: High-quality hydraulic press can be operated both manually and motorized. Cylinders can be shifted sideways. CE certified Pressure adjustment Drca0Z 1-year warranty Pressure gauge (manometer) User manual 

Condition: new, Year of construction: 2025, pressing force: 60 t, table width: 700 mm, table length: 700 mm, retraction force: 20 t, Equipment: safety light barrier, COLUMN TYPE DOUBLE-ACTION PRODUCTION PLACE TURKEY WARRANTY PERIOD 24 MONTHS FOR 60/20 TONS COLUMN HYDRAULIC PLASTERING PRESS TECHNICAL SPECIFICATIONS TYPE 4 COLUMN BODY MATERIAL St52 – ERDEMİR COLUMN SHAFT DIAMETER Ø 90 – 4 Units. Induction chrome coated shaft SLIDE BEARING BRONZE Zr14 CAPACITY (RAM) 60 TONS CAPACITY (POT) 20 TONS DISTANCE BETWEEN COLUMNS 700 x 700 mm PARALLELITY TOLERANCE 120 micron/mt. PERIPHERALITY TOLERANCE 60 micron/mt. STROKE (RAM) 400 mm Drapjp STROKE (POT) 100 mm MIN. INTERMEDIATE SPACE 100 mm MAX. INTERMEDIATE SPACE 500 mm WELDING STRESS RELIEF Stress relief by vibration WELDING APPLICATION EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731) MAX. WORKING PRESSURE 250 Bar TOTAL MOTOR POWER 7.5 kW– IE3 MAIN PUMP 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST Descent Speed 150 mm/sec. MOVING TABLE PLASTERING SPEED 12 mm/sec. MOVING TABLE RETURN SPEED 170 mm/sec. POT TABLE FORWARD SPEED 30 mm/sec. MAIN CYLINDER INNER DIAMETER Ø 175 mm – Ck45 POT CYLINDER INNER DIAMETER Ø 100 mm – Ck45 AUXILIARY ACCELERATOR CYLINDERS 2 pcs. APPROXIMATE HEIGHT OF PRESS 3100 mm APPROXIMATE WIDTH OF PRESS 1050 mm APPROXIMATE DEPTH OF PRESS 1050 mm LOWER TABLE HEIGHT FROM GROUND 1000 mm PRE-FILL VALVE NG 100 HYDRAULIC UNIT REXROTH or PARKER COOLING SYSTEM SUCTION – CIESSE – PARKER OFF-LINE FILTRATION REXROTH or PARKER MOTOR CLASS USED FOR THE UNIT IE3 LEVEL INDICATOR REXROTH or PARKER AIR FILTER REXROTH or PARKER – 10 MICRON PERMEABILITY RETURN FILTER REXROTH or PARKER – 25 MICRON PERMEABLE OIL AND HEAT INDICATOR REXROTH or PARKER VALVES USED REXROTH or PARKER FILTER CONTAMINATION WARNING ELECTRONIC CONTROL LUBRICATING STYLE AUTOMATIC – (CAN BE ADJUSTED FROM THE SCREEN) RAM STROKE SETTING CAN BE ADJUSTED FROM THE SCREEN POT STROKE SETTING CAN BE ADJUSTED FROM THE SCREEN RAM TONNAGE (PRESSURE) SETTING CAN BE ADJUSTED FROM THE SCREEN POT TONNAGE (PRESSURE) SETTING CAN BE ADJUSTED FROM THE SCREEN SYSTEM ERROR INFORMATION CAN BE VISIBLE ON THE SCREEN PRESS STATUS INFORMATION CAN BE VISIBLE ON THE SCREEN MOLD MEMORY CAN BE VISIBLE ON THE SCREEN ADJUSTABLE HYDRAULIC UNIT OIL TEMPERATURE INFORMATION CAN BE SEEN ON THE SCREEN LINEAR DISTANCE SCHEDULE NOVATECHNIK or TURCK PLC APPLICATION DELTA TOUCHSCREEN DELTA 7 ‘’ SWITCH MATERIALS SIEMENS – SCHNEIDER APPROXIMATE WEIGHT 5 TONS

Condition: used, Year of construction: 2021, number of beds: 2, _____Basic equipment:Base frame for mounting on carrier vehicle with technical compartment for protected storage of components- 60001 GRP safety tank with baffle walls- 6-cylinder piston diaphragm pump with hydraulic drive from vehicle min. 40 l/min incl. 21/2" suction fitting with external suction via Storz C-coupling and pressure switch fitting- Spray bar with 1" stainless steel nozzle line mounted at the rear, incl. tip protection in front of spray bar- Manually operated triple nozzle holder for turning with 3-fold nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling and pressure switch fitting Manually operated triple nozzle holder for turning with triple nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling- Low-level drain tap with Storz C-coupling- Mechanical fill level indicator- Electro-pneumatic pressure filter flushing- Plug-on RKL at the rear- Position lights on spray bar left and right: front white, rear red- The nozzle carrier can be switched on and off pneumatically to prevent dripping- The application rate is controlled and monitored fully automatically via a Spray-Dos computerMore equipment:- Draw hook: base frame as draw hook design- Spray bar can be folded up- Spray bar 2.50 m- Pump capacity 320 l/min 2 1/2" suction filter Czwpnqdt

Condition: used, Functionality: fully functional, Year of construction: 2016, 1 Pedax mesh cutting machine KS 6000, working width 6.00 m. Stable machine frame, mobile cutting head, powerful hold-down device over the entire cutting width with plastic rail; thus secure tensioning of the reinforcing steel mesh. Electromechanical drive. Cutting performance: diameter 12 mm single bar with 150 mm bar spacing, diameter 8 mm double bar with 100 mm bar spacing. Connected load 4 kW. Dq9Hkx

Condition: used, Year of construction: 2024, Cloth cutter Kolbus: KS 601 Year: 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Standard equipment: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: - cross cutting module and split cutting module with 10 circular knives Dqyzoj - deposit delivery Technical specifications: Mechanical speed: up to 50 cuts/min Material width max.: 1.600 mm Cutting width max.: 1.524 mm Cutting width min.: 50 mm Length of cut max.: 1.100 mm Length of cut min.: 100 mm

Condition: used, Year of construction: 2024, KOLBUS Cloth Cutter KS 601 year 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Configuration: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: - cross cutting module and split cutting module with 10 circular knives - deposit delivery Technical specifications: mechanical speed: up to 50 cuts/min Dqxgr2 material width max.: 1.600 mm cutting width max.: 1.524 mm cutting width min.: 50 mm length of cut max.: 1.100 mm length of cut min.: 100 mm

Condition: used, Technical details: voltage: 360-730 / 50 V / Hz weight of the machine ca.: 0,150 t Bsinblax2Eu *

Condition: excellent (used), Year of construction: 2023, total width: 2,040 mm, Year of manufacture: 2023 Empty weight: 596 kg Attachment suited for: Loaders Working width: 180 cm CE mark: yes Technical condition: very good Visual appearance: very good General Country of production: Germany Dqnj9R

Condition: new, Workshop press with 60 tons maximum pressing force. With electric motor and additional manual control. Therefore also ideally suited for fine work. Versions (net prices): Ausführungen 30t 60t 100t 150t 200t > 200t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 60 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 60 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices Bn9Fwc20O - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) A demonstration machine can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Lp3ew8c Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded. Please just contact us, we will be happy to advise you without obligation.

Condition: ready for operation (used), IKA KS 260 B Circular shaker Shaker Very good condition. Accessories: Bowl attachment AS 260.3 Movement type: circular Shaking stroke in mm: 10 Permissible shaking weight (incl. attachment) in kg: 7.5 Motor power input in W: 45 Motor power output in W: 10 Permissible duty cycle in %: 100 Min. speed (adjustable) in rpm: 50 Speed range in rpm: 0 - 500 Speed display: LED line Timer: yes Timer display: LED - line Time setting range in min: 5 - 50 Operating mode: Timer and continuous operation Shaking table lock: no Dimensions (W x H x D) in mm: 360 x 98 x 420 Weight in kg: 8.5 Permissible ambient temperature range in °C: 5 - 50 Permissible relative humidity in %: 80 Protection class according to DIN EN 60529: IP 21 RS 232 interface: no Analog output: yes Voltage in V: 220 - 240 Frequency in Hz: 50/60 Device power consumption in W: 45 Description has been adopted. You are welcome to come by for a viewing. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Khejjgmjon Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Centrifugal pump, water pump Kw9Bphx7Pv -Manufacturer: gwk, self-priming centrifugal pump type WP 60 -Motor: 0.55 kW 2800 rpm -Pump: Speck Pumps -Max. Flow rate: 45 l/min -Max. Delivery height: 55 m -Quantity: 2 pieces available -Price per piece -Dimensions: 280/140/H150 mm -Weight: 10.8 kg/pc.

Year of construction: 1990, Condition: good (used), Functionality: unexamined, machine/vehicle number: 7291, Adcole Model 1200 Cylindrical Coordinate Measuring Machine (CCMM) measuring machine for measuring crankshafts and camshafts. Measuring machine: Buvcjjp0Bk width 1075mm depth 1195mm height 2890mm Control cabinet: width 800mm depth 800 height 1800-2000mm Weight of components 5325kg On 19.01.2004 the above machine arrived at our plant, as part of our production was the machining of crankshafts. Around 2010 the production of crankshafts was discontinued. Since then the room where the measuring machine is located has been closed and the measuring machine is not used. We are currently in the process of reorganizing the company and due to the closure of the crankshaft machining department, we no longer need the machine.

Condition: good (used), forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1670 mm -Cross-section: 150 x 60 mm -Recording: see photos -Transport dimensions: 1900/730/H170 mm -Total weight: 322 kg Dq9Udf

Condition: new, This series of hydraulic workshop presses with motor drive are designed with a stable portal with adjustable, open support table and are suitable for applications such as pressing in and out bearings, for assembly and straightening work or for testing workpieces. The laterally positionable working cylinder facilitates set-up without the workpiece having to be moved. These presses are almost indispensable in technical workshops and maintenance departments. C0Ujespf

Year of construction: 1990, Condition: as good as new (ex-display), Eckolt hydraulic press in mind condition Bfkfyclsic executed with plate holder see pdf for technical specs