Electro-hydraulic press 150 Ton
AXA PM 150/15

Year of construction

2026

Condition

New (fully functional)

Location

Concordia Sagittaria Italy

Electro-hydraulic press 150 Ton AXA PM 150/15

Show map

Machine data

Machine type:: Electro-hydraulic press 150 Ton

Manufacturer:: AXA

Model:: PM 150/15

Year of construction:: 2026

Condition:: new

Functionality:: fully functional

Price & Location

Location:: Via Levada, 72, 30023 Concordia Sagittaria VE, Italia

Call

Technical details

Input voltage:: 400 V

Details about the offer

Listing ID:: A991-2515

Update:: 28.04.2026

Description

AXA ELECTRO-HYDRAULIC PRESS WITH TRAVERSING CYLINDER

Capacity: 150 tons.
Automatic dual-speed operation with fast mode.
Special electrical panel with quick/slow changeover switch for one-handed operation.
Traversing cylinder stroke: 816 mm.
Internal clearance (side to side): 1,500 mm.
Ram stroke: 300 mm.

No. 01 AXA PM150/15 ELECTRO-HYDRAULIC PRESS WITH MOVABLE PISTON – NEW ITEM, CE MARKED.
— AUTOMATIC DUAL-SPEED OPERATION WITH FAST MODE.
— COMPLETE WITH SPECIAL ELECTRICAL PANEL WITH QUICK/SLOW SWITCH FOR ONE-HANDED OPERATION.

— TECHNICAL DATA SHEET ATTACHED.

- Rated force: 150 tons
- Cylinder stroke: 300 mm
- Internal clearance: 1,504 mm
- Approach speed (fast): 1,450 mm/min
- Working speed (slow): 105 mm/min
- Ram stroke: 300 mm
- Ram diameter: 110 mm
- Stem diameter: M30
- Tank capacity: 50 liters
- Max pressure: 350 bar
- Voltage: 400 V, Frequency: 50–60 Hz
- Motor power: 3 kW
- Max current draw: 7.3 A
- Weight: 1,500 kg
Hsdpfelruhdex Amgol

Equipped with GALTECH distributors:
• 2MP block.
• No. 2 VIVOIL external gear unidirectional pumps: one for rapid approach and return (set at 20 bar), and one with adjustable pressure via handwheel to set desired force.
• Maximum pressure valve with mechanical lock to prevent overpressure.
• Standard gauge to display delivered force.
• INTECH electrical panel, certified according to current standards and supplied with independent CE marking.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2016

95 listings online

Call

Send inquiry

Telephone & Fax

+39 0421 ... show

Fax:

These listings may also fit your interest.

Listing

Lead/traction spindle lathe Trens SUI 80

Babberich

7,577 km

Lead/traction spindle lathe
TrensSUI 80

Call

Condition: excellent (used), Year of construction: 2018, turning diameter over cross slide: 800 mm, spindle bore: 92 mm, turning diameter: 800 mm, turning length: 6,000 mm, total length: 9,000 mm, total width: 1,900 mm, total height: 2,100 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 14 rpm, HeidenHain ND-780 with 3 axis Read-outX, Zo, Z HeidenHain LS388C Scales 2 x CE Chuck covers for 500 & 900 mm SCHUNK 3 chuck Ø 400-102 Bison 4 chuck.... Steady rest Ø 30 - 210 mm Steady rest Ø 210 - 370 mm DBC Turning Length: 6000mm Swing over bed Ø: 800mm Swing over cross slide Ø:520mm Swing in the gap Ø: 870mm Gap length: 320mm Spindle bore: 92mm Spindle power: 15kW Bed width: 550mm Spindle taper: 6Mk Speeds / ranges: 14 - 1400rpm Length: 9000mm Hedpfevn Svujx Amgol Width: 1900mm Height: 2100mm Weight: 7670kg

See details

Listing

Crane chassis with electric rope winch 3200 kg Stahl AS 3016-16 2/1

Wiefelstede

7,607 km

Crane chassis with electric rope winch 3200 kg
StahlAS 3016-16 2/1

Call

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Drive system: FA-C 3728 133-1 -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Quantity: 1 crane trolley available -Price: per piece Hjdstlzdqjpfx Amgel -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/unit

See details

Listing

Universal Milling Machine WMW Ruhla FUW 200-II

Germany

7,963 km

Universal Milling Machine
WMW RuhlaFUW 200-II

Call

Condition: used, Technical details: travel -y axis: Schlitten auf Balken: 200 mm spindle taper ISO: SK 40 spindle head swivable left - right: je 90° ° quill stroke: 80 mm turning speed range: 90 - 900 / 5 step U/min distance table - lower edge spindle: min./max.: 50 / 400 mm table surface area: Anbaufläche:760 x 200 mm table surface area: Spannfläche: 630 x 200 mm max. table load: 100 kg x-travel: Tisch längs: 320 mm z-travel: Tisch vertical 350 mm table swivelabel +/-: re/li je 30° distance table - lower edge spindle: min./max.: 50 / 400 mm feed:: Tisch: stufenlos 14 - 71 mm/min total power requirement: 4,0 kW weight approx.: 1.200 kg dimension machine xH: 1,3 x 1,5 x 1,8 m Equipped with Heidenhain DRO for X and Y travel Swiveling work spindle The feed works via variator gear. The table is swivelable. Spindle speeds operate in 3 levels via gears and in 2 levels electrically. Cooling device Hjdpfx Ameu Ndb Ajgjl diverse tool holders SK40 Der Fräsbalken ist um ca. 350mm ausfahrbar. The machine vise is not included in the delivery scope (see picture), but can be purchased additional! *

See details

Listing

VACUUM DRYER Kronseder Trockentechnik Vakuumtrockner KIT 100

Vilsbiburg

8,160 km

VACUUM DRYER
Kronseder TrockentechnikVakuumtrockner KIT 100

Call

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 700 kg, total length: 2,860 mm, total width: 1,230 mm, construction height: 1,700 mm, Fully operational exhibition dryer, Ø 1090 mm We are offering our fully operational exhibition dryer with a diameter of 1090 mm. The unit is very compact and practical in terms of required space and easy relocation. Technical Details: Connection: only a water connection for spraying and a 16A power plug are required Heating system: 4 kW electric heater Hjdpfxsxbz Hrj Amgjl Wood moisture measurement at 3 measuring points Plug-and-play design – ready for immediate use Advantages: Ideal for small carpentry workshops Easy to transport and flexible positioning

See details

Listing

Hydraulic workshop press MIOTAL® WHP 160

Mindelheim

8,079 km

Hydraulic workshop press
MIOTAL®WHP 160

Call

Condition: new, Technical data: Capacity: 160 t Installation height: 1100 mm Max. working area: 1100 x 350 mm Ram stroke: 400 mm Hsdpfek Nz Ntsx Amgol Advance speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally adjustable cylinder via rack, pinion, and handwheel - Spacious working area - Height-adjustable table - Torsion-resistant design with welded steel construction - Manometer - Fine pressure adjustment - Additional hand pump Support prisms available at extra cost.

See details

Listing

Crane chassis with electric winch 3.2 tons Abus GM1032FD

Wiefelstede

7,607 km

Crane chassis with electric winch 3.2 tons
AbusGM1032FD

Call

Condition: good (used), Year of construction: 1984, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Abus, crane chassis with electric cable winch -Cable pull: Type GM1032FD -Load capacity: 3200 kg -Main stroke/fine stroke: 5/0.7 m/min -Hook path: 6.0 m -Roller spacing: 1400 mm, dimensions see photos -Drive system: Abus -Accessories: Connection cables, without crane operation -Transport dimensions: 1550/1180/H530 mm Hodpfxju I Hpae Amgol -Weight: 512 kg

See details

Listing

Germany

7,694 km

Pneumatic pasting press
O.R.E.Presse

€1,200

ONO plus VAT

Call

Condition: good (used), Year of construction: 1969, Pneumatic gluing press, pressure max. 10 bar, gluing bar with heating, gluing surface 550 x 40 mm stepless temperature adjustment for the lower and upper gluing bar from 0 - 300 degrees C, stepless adjustment of the gluing time, Hedpsd Dxqbjfx Amgsl drive power: 5 Kw, 380 Volt-50 Hz, two-hand operation SIEMENS. Pressure build-up via articulated lever, max. opening travel approx.30 mm

See details

Listing

Milling Machine - Vertical WMW - RUHLA VRB 2242

Germany

7,963 km

Milling Machine - Vertical
WMW - RUHLAVRB 2242

Call

Condition: used, Year of construction: 1981, Technical details: x-travel: 400 mm y-travel: 420 mm z-travel: 380 mm table surface area: 710 x 400 mm max. table load: 120 kg range of revolution per miute: 45 - 2240 / 18 step U/min feed continuous: 6,3 - 600 / 2 steples mm/min quill stroke vertical: 100 mm quill stroke: horizontal: 100 mm spindle taper: vertical/horizontal: SK 40/SK40 spindle head swivable left - right: 90 ° distance table/horizontal spindle: min./max.: 200 / 325 mm distance table/vertical head: min./max.: 150 / 730 mm total power requirement: 5,5 kW weight of the machine ca.: 1,95 kg machine dimensions LxWxH: 1,7 x 1,4 x 1,9 m Hodeu Nc Hkjpfx Amgjl dimensions electric cabinet: 850x500x1500 mm The milling machine is equipped with a 3-measuring path display. incl. machine feet and operating instructions *

See details

Listing

Milling machine DECKEL FP2 6810 mit schnellauf Fräßkopf

Burgoberbach

8,004 km

Milling machine
DECKELFP2 6810 mit schnellauf Fräßkopf

Call

Condition: good (used), For sale is a Deckel FP2 with high-speed milling head (V-belt drive with gear ratio) The machine was only used for copper & graphite processing, so it is not subjected to heavy use The machine is ready for use and fully functional Hsdpslz R Iwofx Amgjl A digital display can be retrofitted for an additional charge. The machine can also be sold without a milling head. Partial device NOT included Accessories available for an additional charge Tool holder: SK 40 Travel paths X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg All prices plus VAT Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

See details

Listing

Slovenia

8,476 km

Press Brake
COASTONEcone c9

Call

Condition: ready for operation (used), Year of construction: 2023, General Data Machine weight 1800 kg Measurements height 2200 mm Dimensions Machine Length 1440 mm Main Drive Number of axis 3 Pressing force 220 Kn This 3-axis Coastone Cone C9 press brake was manufactured in 2023. It features a C-frame design, a pressing force of 220 kN, and a maximum bending length of 900 mm. Equipped with an Omron Touchscreen TC15-2D CNC control and Amada Promecam tool clamping system, it ensures precision and ease of use. Located in Slovenia, it comes with a complete bending tool set and a 36-month warranty. Consider the opportunity to buy this Coastone Cone C9 press brake. Contact us for more information. Application Types Bending Hedpfx Asx I S Rwjmgjl

See details

Advertise here