Injection molding machine

Arburg 820s

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Fpjdpfx Aozc N U Ijdloh Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2005, clamping force: 4,000 kN, overall weight: 22,500 kg, Hydraulic injection moulding machine manufactured in 2005. This Arburg SELECTA 820 S 4000 - 3200 features a clamping force of 4000 kN and an opening stroke of 700 mm. The machine has a platen size of 1171 x 1171 mm and a maximum moving platen weight of 4500 kg. If you are looking to get high-quality injection moulding capabilities, consider the Arburg SELECTA 820 S 4000 - 3200 machine we have for sale. Contact us for further details. • Quantity available: 4 • Clamping unit: • Opening force: 100 kN • Opening stroke: 700 mm • Minimum mould height: 350 mm • Maximum daylight: 1550 mm • Tie bar spacing: 820 x 820 mm • Platen size: 1171 x 1171 mm • Max. moving platen weight: 4500 kg Fedpfxjy A Ny Ee Adloph • Ejector force: 100 kN • Ejector stroke: 250 mm • Injection unit: • Screw diameter: 70 mm • Screw L/D ratio: 23 / 20 / 18 • Max. screw stroke: 320 mm • Shot volume: 1323 / 1608 / 2036 cm³ • Max. shot weight (PS): 1215 / 1469 / 1860 g • Injection pressure: 2500 / 2000 / 1530 bar • Injection rate: 304 / 396 / 502 cm³/s • Screw speed: 350 rpm • Screw peripheral speed: 65 / 75 / 80 m/min • Screw torque: 2247 Nm • Nozzle contact force: 110 kN • Nozzle stroke: 600 mm • Drive and power: • Hydraulic pump motor: 55 kW • Total installed power: 96.2 kW • Heating: • Cylinder heating capacity: 6 zones (5500 + 4300 W) • Nozzle heating: 1250 W • Oil tank capacity: 590 l

Condition: ready for operation (used), Year of construction: 2016, operating hours: 33,255 h, clamping force: 4,000 kN, screw diameter: 70 mm, total width: 2,300 mm, overall weight: 22,700 kg, product length (max.): 8,000 mm, This 3-axis Arburg 820 S 4000-2100 hydraulic injection moulding machine was manufactured in 2016. It features a clamping force of 4000 kN, a platen size of 1171 x 1171 mm, and a maximum mould installation height of 850 mm. With a screw diameter of 70 mm and an injection unit of 2100, this machine is well-equipped for high-quality moulding capabilities. Consider the opportunity to buy this Arburg 820 S 4000-2100 hydraulic injection moulding machine. Contact us for further details. • Control system: SELOGICA direct • Distance between tie bars: 820 x 820 mm • Platen size: 1171 x 1171 mm • Max. mould installation height: 850 mm • Max. opening stroke: 700 mm • Max. daylight: 1550 mm • Ejector force: 100 kN • Ejector stroke: 250 mm • Max. weight of movable mould half: 4500 kg • Injection unit: 2100 • Heating zones: 6 + nozzle • Drive power (hydraulic pump): approx. 55 kW • Total installed power: 88.9–96.2 kW • Total connected load: 124 kW • Operating voltage: 400 V 3~ 50 Hz • Machine cycles: 4,157,591 • Pump hours: 69,800 h • Automatic operation hours: 58,556 h • working hours 33,255h • Machine options: 2x core pulls, AES Energy Saving System Additional equipment Fjdpfx Adjyzrddjljph • ARBURG Multilift Select 15 kg robot (2016, transverse) • Load capacity: 15 kg • Y-axis stroke extension: 1400 mm • C-axis: pneumatic 0/90°, 28 Nm torque • Vacuum equipment: 2 circuits (23 l/min each) • Gripper interface: 8 inputs / 4 outputs (programmable) • Valve equipment: 5/3-way valve • Safety: monitored adjustable workspace • Conveyor belt: 800 x 2500 mm • Air blow unit • Srew diamter 70mm

Condition: good (used), Year of construction: 2004, On request and for an additional charge, loading and transport (throughout Europe) can be arranged. All prices include VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange is possible! Phone: Mobile: (also via WhatsApp) Web: Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Fjdpfx Asxirqqodleph Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2004, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 80 mm, injection pressure: 2,500 bar, For sale: Injection moulding machine Arburg 820S 4000-2100, serial no. 195746. The item is in good condition. Technical specifications: Year of manufacture: 2004 Injection unit: 2100 Screw diameter: 80 mm Shot volume: 1407 cm³ Clamping force: 4000 kN Tie bar spacing: 820×820 mm Platen size: 1171×1171 mm Maximum mould height: 850 mm Maximum opening stroke: 700 mm Maximum distance between platens: 1550 mm Ejector force: 100 kN Ejector stroke: 250 mm Maximum weight of moving mould half: 4500 kg Hydraulic pump drive power: approx. 55 kW Total installed power: approx. 88.9–96.2 kW Number of heating zones: 6 + nozzles Net weight of machine: 22,700 kg Dimensions (L × W × H): approx. 8.0 × 2.3 m Control system: SELOGICA Machine cycles: 4,157,591 Pump hours: 69,800 Auto mode: 58,556 Transport and loading can be organised Europe-wide on request, at an additional cost. Prices excl. VAT Fpodpfxjxxi Nvs Adleh Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine purchase & sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing business? Or do you want to sell yours? For further information or contact options, please visit our website.