Surface grinding machine

Amada MEISTER G3

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 550 mm, overall weight: 11,000 kg, total height: 2,500 mm, table load: 1,200 kg, number of axes: 2, This AMADA MEISTER G3 surface grinding machine was manufactured in 2013 and is a robust solution for precision surface grinding applications. Itsdpoyz Scgjfx Apijn The machine is currently not in working condition due to an electronic/control issue. The FANUC controller was replaced; however, the machine did not return to operation after the replacement. A repair was proposed by the manufacturer’s service at an estimated cost of €15,000–€20,000, which was not carried out. As a result, the machine has been out of service and switched off for several years. Please contact us for further information. Machine Benefits Technical Machine Benefits • Suitable for heavy-duty operations. Extra Information The machine is currently not under power Dimensions Machine Depth 6400 mm

Condition: excellent (used), Year of construction: 2015, grinding length 500 mm grinding width 250 mm Iedpfx Apjxy S Dxeijtn

Condition: good (used), Year of construction: 2008, operating hours: 4,198 h, functionality: fully functional, machine/vehicle number: 5070-0016, grinding length: 600 mm, grinding width: 300 mm, grinding wheel diameter: 300 mm, distance table to spindle center: 575 mm, grinding wheel width: 50 mm, overall weight: 3,000 kg, space requirement height: 2,300 mm, space requirement length: 2,960 mm, space requirement width: 3,200 mm, Used surface grinding machine Itjdpfx Apjy Ry Dqjien Very well-maintained condition

Condition: refurbished (used), Year of construction: 2016, operating hours: 2,100 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 270 mm, workpiece weight (max.): 500 kg, total height: 2,670 mm, total width: 2,040 mm, total length: 1,600 mm, table width: 350 mm, quill stroke: 430 mm, type of input current: three-phase, distance table to quill: 430 mm, table length: 550 mm, warranty duration: 6 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 1,600 kg, year of last overhaul: 2025, table load: 1,500 kg, input frequency: 50 Hz, working range: 770 mm, space requirement width: 2,040 mm, space requirement height: 2,670 mm, space requirement length: 1,600 mm, Equipment: documentation/manual, EDM 310MF30 Year of manufacture: 2016, Complete overhaul: 2025 Technical specifications: Travel paths X x Y x Z: 360 x 270 x 270 mm Worktable: 550 x 350 mm Work tank: 770 x 520 mm Distance table/quill min./max.: 160/430 mm Electrode weight: 25 kg Workpiece weight: 500 kg Filling height work tank: 300 mm Power supply: 400V 3-phase 50/60 Hz Power consumption: 7 KVA Machine dimensions (W x D x H): 2040 x 1600 x 2670 mm Equipment: MF30 operating interface Touchscreen display Exopuls+ 60A EDM generator Handheld control unit with enabling button Integrated chiller C-axis 30 rpm, holding brake Flushing/suction table and head New cartridge filter system Work pump Steel table with T-slots CO² fire extinguishing system, TÜV certified 4-position tool changer Itedswz H U Ropfx Apisn Automatic quick-change chuck Erowa/Hirschmann/3R Automatic central lubrication Automatic tank adjustment Geometry and length compensation Performance certification 6 months warranty Transport, commissioning on site, training

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: EB1507, grinding length: 600 mm, grinding width: 350 mm, total height: 1,900 mm, total length: 1,900 mm, total width: 1,900 mm, workpiece weight (max.): 320 kg, grinding height: 312 mm, grinding wheel diameter: 355 mm, distance table to spindle center: 490 mm, table speed: 25,000 mm/min, table load: 320 kg, type of input current: three-phase, grinding wheel width: 25 mm, overall weight: 1,700 kg, grinding spindle motor power: 2,200 W, travel distance X-axis: 700 mm, travel distance Y-axis: 490 mm, travel distance Z-axis: 340 mm, rotational speed (max.): 1,500 rpm, grinding spindle speed: 1,500 rpm, input voltage: 400 V, Equipment: documentation/manual, - Factory number: EB 1507 - Automatic vertical feed - Headstock adjustment - Belt filter system - Coolant system - Machine light Grinding length 600 mm Grinding width 300 mm Workpiece height 312 mm Table size 600 x 300 mm Maximum workpiece weight 320 kg Itsdpozrinlefx Apisn Distance grinding spindle center - table 490 mm Table travel, longitudinal 700 mm Table travel, transverse 340 mm Table feed rate 1 - 25 m/min Speed range - grinding wheel 1500 rpm Drive power - grinding motor 2.2 kW Grinding wheel dimensions 355 x 25 x 127 mm Magnetic chuck 610 x 305 mm Headstock adjustment device Operating voltage 400 V Total power consumption 3.0 kW Machine weight approx. 1.7 t Space requirement approx. 1.90 x 1.90 x 1.90 m Hydraulic unit 0.60 x 0.35 x 0.75 m Coolant system 0.70 x 0.40 x 0.80 m

Condition: good (used), Year of construction: 1998, Surface sanding machine Fabr.ABA Type: ECOLINE 1006 Bj.1998 with Abamatic 1 N.D. Sanding area max : length 1000 mm width 600 mm height 500 mm Magnetic table size : 1000 mm X 500 mm . Paper belt filter, various accessories Further data see data sheet . Complete machine documentation available. Iedpfx Aevbb Iyopijtn Machine in good condition

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, workpiece weight (max.): 1,000 kg, grinding height: 430 mm, grinding wheel diameter: 405 mm, table load: 1,000 kg, grinding wheel width: 50 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 500 rpm, grinding spindle motor power: 7,500 W, warranty duration: 12 months, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, First commissioning: 2024 Operating hours "grinding wheel in use": approx. 100 hours The machine will be completely inspected by the manufacturer OKAMOTO and delivered with an acceptance protocol for the geometry. Manufacturer's warranty: 12 months for delivery within the European Union and commissioning by T-Rade Service GmbH (commissioning optional in Germany: EUR 7,900, EU EUR 9,800) Design: Column feed Control: Fanuc Screen: Touchscreen Workshop programming: for flat, groove, and step grinding (optional) Conventional operation of the machine possible (manual operation) Ijdpfxoz Hc Sdj Apistn Automatic multiple plunge cuts Teach-in functions: vertical, dressing, and reversing points Folding dresser with 3 diamonds next to the magnetic clamping plate Automatic compensation of dressing amount Longitudinal guides: double prism, hand-scraped with thermally symmetrical behavior, PTFE coated Maximum table load: 1,000 kg Hydraulic table drive X-axis Electric servo table drive Z-axis Electric servo grinding spindle drive Y-axis Travel in longitudinal direction: 950 mm Travel in transverse direction: 440 mm Travel table-new wheel (Ø 355 mm): 522 mm Grinding wheel standard: Ø355x38 mm Grinding wheel Ø max.: 405 mm Grinding wheel width max.: 50 mm Grinding wheel bore: Ø 127 mm Grinding spindle drive power: 7.5 kW Grinding spindle speed, infinitely variable: 500-2500 rpm Leveling screws and support plates Operating/programming/maintenance manual, operating tool LED lamp Machine paint: Dark gray/silver structure Machine dimensions approx. L x W x H: 3,560 x 2,900 x 2,210 mm Weight approx.: 4,950 kg Connection value: 15 kVA Accessories: Folding dresser with automatic compensation Coolant flushing gun Flanges 1 piece Grinding wheels 1 piece Commissioning and training by OKAMOTO is mandatory for the warranty. Optionally available: Electro-permanent magnet, transverse pole: 800x400 mm, p=13 mm, extra charge EUR 9,000.00 Band filter tank: 180 liters, extra charge: EUR 9,000.00 All information is non-binding, subject to prior sale. The machines remain our property until full payment. Our general terms and conditions apply. Delivery: ex works Delivery date: upon agreement (approx. 8 weeks) Prices: plus VAT Payment terms: strictly net, 10% with order, 90% before shipment The price for the machine as stated is valid only in Germany. Other EU countries at an extra charge upon request. No export of the machine.

Condition: used, Year of construction: 1993, operating hours: 6,700 h, functionality: fully functional, grinding length: 1,000 mm, grinding width: 600 mm, total height: 2,660 mm, total length: 3,550 mm, total width: 3,150 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, table length: 1,000 mm, type of input current: three-phase, table width: 550 mm, grinding wheel width: 100 mm, overall weight: 6,100 kg, grinding spindle motor power: 11,000 W, input voltage: 400 V, disc diameter: 400 mm, We are offering this used ELB-Schliff BD10 Perfekt NC surface grinding machine, manufactured in 1993. Operating voltage: 3 x 400 V Frequency: 50 Hz Rated current: 37 A Fuse: 50 A Control voltage: DC 24 V DC voltage: 215/320 V Retrofit and conversion to NC with modern control Scraped X and Z axes, control cabinet completely new Overhead and table dresser Magnetic clamping plate 1000x550 High productivity due to max. grinding wheel width of 100 mm (400x100x127) Itedpfxszzlxxe Apisn Unused, attractive accessories available on request CBN & Dia grinding wheels, 1 additional flange, vacuum table 600x400 If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 1996, Technical details: grinding length: 1370 mm grinding width: 560 mm workpiece height: 800 mm total power requirement: 50 kW dimensions of the machine ca.: 9 m Iodpfx Apjw S Hy Hsijtn ABA Z&B 2000, profile grinding machine with swivel dresser Mounting fixtures: magnet, dividing head E-axis dresser B-axis dividing head *

Condition: refurbished (used), Year of construction: 2009, TECHNICAL SPECIFICATIONS, MODEL T 60.35 CN Rawable length mm: 600 Rawable width with grinding wheel width mm: 390 Rawable height with new grinding wheel (on magnetic chuck) mm: 400 Magnetic chuck surface mm: 600x300 Longitudinal travel mm: 750 Transverse travel of the carriage under the table mm: 350 Adjustable table speed m/min: 1-30 Gripping wheel dimensions mm: 400x40x127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power: 7.5 kW Hydraulic pump motor power: 2.2 kW Net machine weight: 3,000 kg - Vertical movement of the grinding wheel headstock The vertical movement is performed on linear needle slides and is controlled by a precision ball screw and a YASKAWA brushless motor. Vertical axis resolution: 0.001 mm. Optical scale with 0.001 mm resolution. Dimension readout on the display. Display resolution: 0.001 mm. Electronic handwheel for manual movement. - Transverse movement The transverse movement is performed on hydrostatic slides and is controlled by a precision ball screw and a YASKAWA brushless motor. Dimension readout on the display. Display resolution: 0.001 mm. Optical scale with 0.001 mm resolution. Electronic handwheel for manual movement. - Longitudinal table movement Two hydraulic cylinders and a hydraulic unit located outside the machine control the table movement. Rotation speed is continuously adjustable from 1 to 30 m/min. - Lubrication Located outside the machine, this system controls the table movement and the lubrication of all moving parts. ACCESSORIES - LODI CNC type T 2020W with 12.1" graphic display (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, and polishing Itodpfx Aox N I Aropion - Visualization to the thousandth of a millimeter of vertical and transverse axis movements - Electronic handwheel for manual axis movement - Coolant system with paper filter and high-pressure pump - Mist extractor (capacity 2,400 m³/h) - Electro-permanent magnetic plate, dimensions 600 x 300 mm - Hydraulic dressing device above the head with CNC-programmable automatic dressing operation and automatic grinding wheel wear compensation. - YASKAWA frequency converter for continuous adjustment of grinding wheel speed and for accelerating braking at rest. - Grinding wheel flange with balancing shaft - Complete work area enclosure - Work light