Used veneer splicing machines for sale (35)

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Redpfxexgqmxe Afzen Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: used, Year of construction: 2000, total height: 1,300 mm, total length: 1,350 mm, total width: 500 mm, Empty weight: 200 kg - Year: 2000 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Opening width [mm]: 1000 Rodsychxfjpfx Afzsn - Min. veneer thickness [mm]: 0.4 - Max. veneer thickness [mm]: 2 - Min. feed speed [m/min]: 8 - Max. feed speed [m/min]: 15 - Transport dimensions: 1350mm x 500mm x 1300mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Code: 0487 Brand: KUPER Model: 630 Thread splicer for veneer with base Rodpfsxtat Uex Afzen Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Condition: ready for operation (used), Year of construction: 2004, This Josting ZFS 2800 veneer guillotine was manufactured in 2004. It features a cutting length of 2810 mm and an insertion height of 80 mm, suitable for a cutting range of 20 - 470 mm. Equipped with a light barrier safety device, swing-up protective gratings, and a telescreen positioning control for enhanced operational safety and precision. Consider the opportunity to buy this Josting ZFS 2800 veneer guillotine. Contact us for more information about this machine. Additional equipment • Light barrier safety device • Safety-oriented electric control • Swing-up protective gratings • Guide light as cut indicator • Telescreen positioning control • Fast table drive with swinging and drawing motion of knives • Simultaneous cuts of top and bottom knife • Automatic course of table, pressure bar, and knife movement • Intermittent operation of low noise drives precision hydraulic with 2 pressure stages and high-quality valves Machine Benefits Technical Machine Benefits • Cutting length: 2810 mm • Insertion height: 80 mm • Cutting range: 20 - 470 mm • Drawing motion of knives: approximately 20° Rjdpfsyap Snox Afzjn • Operating voltage: 400 v • Frequency: 50 cycles Extra Information Supplied with operating instructions Complete and ready for connection

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Redpfx Asx Upgcjfzjn

Condition: used, Storage location: Supplier Redpex Upflsfx Afzon

Condition: used, functionality: fully functional, Arm reach: 630 mm Veneer thickness: 0.4 - 2 mm Feed speed: 7 m/min Voltage: 220 V, single-phase Overall dimensions: 950 x 500 x 1180 mm (H) Weight: 95 kg Redpex U Tggefx Afzsn

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 2,400 mm, space requirement length: 9,000 mm, working width: 1,600 mm, Crosswise Veneer Splicing Machine / Cross Splicing Machine Manufacturer: Kuper Model: ACR CrossRunner 1600 Year of manufacture: 2007 Narrow cross splicing machines for pre-glued veneer strips with a small working width. The machine operates significantly faster in cross-feed mode compared to longitudinal machines and is thus an economical alternative, for example, for cross-veneered interior doors or smaller furniture parts. Working width: 1600 mm (along the grain) Veneer strip width: from approx. 60 mm Veneer thickness: approx. 0.3 - 2.5 mm Feed speed: approx. 30 m/min Suitable glues: PVAc or urea glue With automatic stacking Control: Siemens Simatic with touch display Redpfx Afsyayumszen Voltage: 400 V, 50 Hz, 3 Ph Rated current: 16 A Overall dimensions (W x L): approx. 2400 x 9000 mm

Condition: used, Year of construction: 2006, functionality: fully functional, Fisher+Rueckle EM-28 Edge strengthening and trimming device edgemaster, year 2006 for sale! Veneer strip length 420 - 2800 mm Veneer sheet width (cross grain) 400 - 4200 mm Veneer strip thickness (incl. trimming) 0,3 - 1,5 mm Veneer strip thickness 0,3 - 2,0 mm Production speed (continuous) 15 - 35 m/min. Cut-off each side 10 - 350 mm Tape (paper) width 6 mm Rodpfxeumrgas Afzen Tape (paper) thickness 0,16 mm Type CP-99 Roll (core in- and outside) ∅ 75 mm, ∅ 325 mm Roll (width) 65 mm Tape running meter 3200 m Electric energy 1,1 kW Compressed air 6 bar Compressed air consumption 5 NL/min

Condition: good (used), functionality: fully functional, Outreach 420 mm Rodpjx Uphtofx Afzsn Feed rate 6 m/min Veneer thickness 0.4 - 2 mm Electrical connection 230 V Machine 'start' via foot switch Machine immediately available

Condition: ready for operation (used), Year of construction: 2006, This FISCHER & RÜCKLE Monguzzi AFD 35 / 2600 veneer guillotine was manufactured in 2006. It features a max cutting length of 2600 mm and widths from 45 to 350 mm. Equipped with a solid, heavy-duty build and a quality hydraulic system, it ensures high productivity and precise cuts. Ideal for preparing veneer strips for splicing. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max. Cutting length: 2600 mm • Cutting widths: 45 - 350 mm • Pressure beam opening: 100 mm • Pressure beam width: 350 mm • Parallel fence with digital read-out: 25 - 1000 mm • Cutting angle approx. : 45° • Movable laser lines: for optimizing veneer yield. The manually operated laser line for the position of the front blade is quickly set. The veneer width is transferred to the computer at the push of a button, and the cutting process starts automatically. Extra Information Features: Solid, heavy duty built with generously-dimensioned pressure beam and cutting table to absorb the high clamping and shearing forces. Unique system with fixed, solid cutting table and movable pressure beam. Laser lights for exact visual identification of cutting lines. Quality hydraulic system with large oil tank. Electric-motor-driven parallel stop with rapid adjustment. Rsdpox Nrmbofx Afzjn Industrial computer based on Windows operating system, wide screen and keyboard. Various modes of operation and storable program operations. Extensive collection of production data. Central lubrication unit.

Condition: like new (used), gluing machine for thread with adhesive Rsdpjx U Dhzjfx Afzon zigzag stitching air-blown heating element pedal control 380V power supply

Condition: good (used), Code: 0062 Brand: KUPER Model: FW / J 900 Thread splicer for veneer Technical Data Reach mmm 920 Feed 15 mt/min Motor power Kw 0,18 Electrical connection v. 380/50 Total installed power Kw 0,45 Heating 200 watt Compressed air 6 bar Overall dimensions mm 1350 x 580 x 1600 h Weight kg 185 Rodsx I Dwpopfx Afzen

Condition: used, Year of construction: 1966, functionality: fully functional, machine/vehicle number: 0371, Veneer splicing machine Manufacturer: Kuper Type: FW 100 Machine No: 0371 Year of manufacture: 1966 Stand projection: 1150 mm Throughput speed: approx. 10 - 30 m min. Rsdevk U Thepfx Afzon Drive: brake motor 0.55 kW 380 V, optionally 220 V three-phase current Total connected load: 1.8 kW Heating: 7 V 120 W Weight: 630 kg Space required: 2300 / 800 mm Box dimensions: 2450 / 1450 / 900 mm Ship space: 3.2 m³

Condition: used, Kuper Type FW/Mini veneer splicing machine for precise gluing and splicing of veneer sheets using glue threads. Ideal for smaller operations or flexible applications in the production of high-quality veneer surfaces. Includes a supply of glue threads. Redpfx Aswrfbdsfzsn Stand throat: 420 mm feed: approx. 6 m/min

Condition: excellent (used), Year of construction: 1996, goose neck 920 mm feed speed 20 m/min veneer thickness ca. 0,4 - 2,0 mm motor 400 V, 50 Hz,, 3 PH incl. manual incl. glue thread Redpfxjg Nn E Ne Afzsn Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Veneer splicing machine Model : KUPER FWJ 920 Rsdjtq Ey Tjpfx Afzsn In very good condition.

Condition: excellent (used), Year of construction: 1999, Proven veneer splicing machine, veneer stitching machine by Kuper FW/M 630 T Throat depth: 630 mm Power connection: 230V Foot pedal control 1 spool of glue thread Threader Separator The machine is set up and ready to use immediately. CE marking Operating manual Rsdpfx Afjq Umw Ejzjn The machine can be demonstrated on site by appointment. We only offer machines that are demonstration-ready in our warehouse; see also 'more offers from this supplier.'

Condition: used, No. 04482 Veneer splicing machine Haug FZZ 95 Used For joint-tight splicing of veneer from approx. 150 mm length, 35 mm width and 0.3 - 3 mm thickness The glue line comes from below Automatic thickness and tolerance compensation Infinitely variable throughput speed of 10 - 45 m/min Zig-zag or serpentine line of the glue line Electrical connection 0.8 kW, 240 V Stand projection 950 mm Infinitely variable material feed 5 - 15 m/min Transport dimensions approx. 1550 x 750 x 1340 mm LWH Weight approx. 265 kg Sale on behalf of the customer, ex location near 69124 Heidelberg, without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Rodpfx Afew Id S Sozen Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: like new (used), Year of construction: 2007, I sell the veneer splicing machine KUPER FLI. Redevxvc Hopfx Afzen Year 2007. Very good condition. Available immediately.

Condition: good (used), functionality: fully functional, Complete plywood manufacturing line including: 1 BUERKLE compounding line year 1991 with BUERKLE roller gluer length 3400 mm + 1 OLM long-wire sender + 1 OLM cross-wire sender + 1 assembly table. 1 press loading basket with 10 positions. 1 BVH 10-stage press with thermal oil heating platens. - Platen size: 3700 x 1900 - Platen thickness: 40 mm - Opening between platens: 75mm - 1 central cylinder D700 mm, max. hydraulic pressure 315 Kg/cm². Rodpjul Uizofx Afzjn 1 press unloading basket with lateral evacuation pushers on lifting table. Line currently in operation, available second half of 2025.

Year of construction: 1995, condition: good (used), Kuper veneer zig-zag splicer machine, type FW/ 1200-E Rodpehbp Ifsfx Afzjn year of manufacture 1995 S/N 3508 3179 Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device max. veneer thickness : 3,0 mm min. veneer thickness : 0,3 mm glue thread with hot air heating Compressed air discus for transporting the veneer over the veneer table control via foot pedal feed speed : 35-60m / min Volt: 400 V, 50 Hz Total power 1,35 kW working height 915mm weight approx. : 440 kg Dimension : 2,12m x 0,73m x 1,55m

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, OUR BESTSELLER – 1000 mm Throat Depth Veneer splicing machine for gluing veneer strips including glue application unit with nearly horizontal glue application disc. Perfect in combination with glue cooling system (optional). NEW INDUSTRY 4.0 All essential machine and performance parameters are recorded, transmitted and made available centrally for analysis (optional). Additional modules for monitoring power and compressed air consumption available (optional). SPECIFIC FEATURES - Innovative veneer feeding system with disc wheels and tolerance compensation mechanism for jointing without offset - Low-maintenance, energy-saving, and veneer-friendly high-performance plastic chains (excellent sliding properties, minimal heat conduction, and no discoloration) - 12 mm slim, chrome-plated heating rails ensure minimal stress on veneer due to shrinking, and significantly reduced energy consumption - Intelligent automatic energy management for standby and operating mode - Intuitive control panel with all key functions at a glance, parameter memory TECHNICAL DATA* Throat depth: 1,000 mm Veneer thickness: approx. 0.35 – 2.5 mm, optionally from approx. 0.25 mm, optionally up to approx. 5.0 mm Veneer lengths: from approx. 300 mm Veneer width: from approx. 35 mm Feed speed: steplessly adjustable from 12 – 55 m/min Operating voltage: 400 V, 50 Hz, 3 Ph + N + PE Redpfx Aoxdxktsfzen Total connected load: 4.1 kVA Air consumption: approx. 5 NL/min at 6 bar *Subject to material testing, depending on wood species and micro or thick veneer package (option) only without micro and thick veneer package (option) GLUES Suitable for urea resin adhesive Glue offer available on request! Item No. 0164700

Condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, empty load weight: 31 kg, For assembling veneers with thicknesses of approximately 0.4 – 2 mm. The KUPER glue thread, applied in a zigzag line by a heated thread guide, guarantees tightly sealed and robust joints. The thread side is positioned inward during pressing, eliminating the need for tedious sanding of adhesive residue. An ideal machine featuring all the advantages of KUPER zigzag gluing machines. Rjdpfx Asxdxh Esfzon Key features: * Durable PUR coating * Disc wheel system with tolerance compensation for various veneer thicknesses * Stainless steel worktable * Hard chrome-plated pressure roller * 8-step switch for adjusting the heating power * Start/stop foot switch Technical specifications: Throat depth: 630 mm Feed rate: approx. 7 m/min Veneer thickness: approx. 0.4 – 2 mm Drive: 200 V electric motor Voltage: 230 V, 50 Hz Net weight: 31 kg Gross weight: 40 kg Carton dimensions: 97 x 45 x 46 cm Standard accessories: 1 test spool of original KUPER glue thread Type K 12 10 threaders 103070 1 kg separating agent 105661 1 set of tools, 1 operating manual Glue thread supply available on request! Item No. 0115034

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, For assembling veneers with thicknesses of approx. 0.4 - 2.0 mm. The machine operates using a special glue thread, which is applied in a zig-zag pattern over the joint. High adhesion and tear resistance ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is positioned inward, eliminating the need for sanding off the adhesive medium. Key features: * Torsion-resistant C-frame construction made of steel * Durable PUR coating * Stainless steel worktable * Standard industrial machine heating system * Disc wheel system with tolerance compensation for varying veneer thicknesses Redpfx Ajxdxcpofzen * Adjustable heating output for stationary and running operation * Electrically controlled thread tearing roller * Fully automatic start/stop function via light sensor Technical specifications: Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 Volt, 50 Hz, 3-phase Total connected load: approx. 0.97 kVA Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg release agent 105661 1 set of tools, 1 operating manual Glue thread offer available on request! Item No. 0152300