Used veneer cutters for sale (34)

Condition: good (used), Code: 0541 Brand: CAGLIO Model: TO 3200 Hydraulic veneer guillotine Technical data: Very strong construction Cutting length mm 3200 Cutting height mm 100 Motorized rear register Max cut depth mm 800 Fpsdpfxsyiufrs Af Dsc Min cut depth mm 25 Pump unit motor Kw 7,5 Photocell Overall dimensions: mm 3900 x 1000 x 1650 h Weight kg 4300

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Maximum insertion height: 80 mm FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Fpedpfxsxgbwzj Af Dsc Ex-works: - available immediately -

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 3,550 mm, cutting width (max.): 530 mm, overall weight: 9,000 kg, stroke length: 100 mm, TECHNICAL DETAILS Usable cutting length (as double guillotine): 3,200 mm Usable cutting length (as single plate shear): 3,550 mm Press stroke: 100 mm Press width: 550 mm Min. cutting width: 18 mm Max. cutting width: 530 mm Scrap setting range: 0/50 mm Operating pressure: 6/7 bar MACHINE DETAILS Installed total power: 13.9 kW Fpodpfeyf Eucjx Af Djc Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,700 x 1,800 mm Weight: 9,000 kg EQUIPMENT Robust steel construction Blade beam made of cast iron Self-lubricating prismatic guides Adjustable rear support Press for holding the veneer package during cutting Photoelectric cells Electronic programming device Perimeter safety guards

Condition: used, Stack cutting machine, guillotine cutter, guillotine SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Guillotine for paper, cardboard, rubber, wood, and veneer Paper shear, rubber shear, plastic shear, paper and veneer shear Machine no. 60178 Year of manufacture: 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge: max. 1550 mm Motor power (blade drive): 5.5 kW Fpsdpfx Ajdzqnyof Dec Power supply: 380 Volt, 50 Hz - Two-hand operation for blade activation - Automatic pressing device holds the paper stack on the table - Manual clamp and blade activation via foot switch (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electric control not functional, without wiring diagrams, without user manual - Back gauge adjustment via servo motor (servo motor, controller, and control present, not functioning) Required space (L x W x H): 325 x 270 x 165 cm Space requirement for transport without disassembly: Length 330 cm x Width 270 cm x Height 175 cm Space requirement for transport with disassembly: Length 550 cm x Width 220 cm x Height 175 cm (machine + table separately) Machine dimensions: Length 270 cm x Width 190 cm x Height 175 cm Back gauge table: Length 240 cm x Width 170 cm x Height 120 cm Weight of assembled machine: approx. 5000 kg (without transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sales price does not include the 20 mm steel plate on which the machine is placed in storage. (Price for the steel plate: EUR 900 net)

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 241 143, cutting length (max.): 3,600 mm, Veneer shears with one blade; length: 3.60 m Fedpfx Afjwql N Se Dspc

Condition: good (used), Generally in good condition Fjdpfx Ajyakytof Dspc 2600 mm cutting length Up to 3 mm veneer thickness Including scale for adjustment Overall, a very nice machine for processing veneer. If you have any questions or are interested, please feel free to contact us!

Condition: excellent (used), Year of construction: 1988, I sell the cross veneer guillotine Josting QFS 800. Year 1988 (2pcs. available on stock). Fedpfjyc Nilsx Af Dspc Cutting length 800mm. Cutting height 60mm. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 1967, I sell the veneer guillotine Josting PFS 2100. Year 1963 and 1967 (2pcs. available on stock). Cutting length 2100mm. Cutting height 60mm. Cutting width 20-680mm. Fedpfx Afsyc Nh Us Djpc Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 1992, I sell the double knife veneer guillotine Josting ZFS 2800. Year 1992 / fully reconditioned 2007. Cutting length 2810mm. Fsdpfxevxli Aj Af Depc Cutting height 80mm. Cutting width 20-470mm. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 1987, I sell the double knife veneer guillotine OMPEC OA 3200/400. Year 1987. Cutting length 3200mm. Fodpoyc I Tvjfx Af Depc Cutting height 80mm. Cutting width 20-450mm. Very good condition. Available immediately.

Condition: good (used), Year of construction: 1988, functionality: fully functional, Clipper Babcock BSH - STC 28 - 1988 Fpodpfx Afst D Dg To Dec To be disassembled by the buyer

Condition: good (used), Code: 0263 Brand: MONGUZZI Model: TRC - MP 4200 - CE Standard Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy base structure Large heavy presser for ideal clamping of all types of veneer High-quality steel blade with high wear resistance Can be operated in both automatic and manual modes Hydraulic control unit Second control panel for end trimming Automatic rear register with electronic programmer 1500 mm Cutting length 4300 mm Max register depth 1500 mm Min register depth 25 mm Useful presser opening 80 mm Presser width 360 mm Cutting time 4 sec Safety photocell barriers Power 10 Kw Work surface height 910 mm Fpjdpex Hfr Sefx Af Dec Overall dimensions : machine mm 5700 x 1300 x 1800 h - Rear register mm 3500 x 2000 x 300 h Weight kg 6500

Condition: excellent (used), Veneer Guillotine Casati Macchine CIM31 Working length: 3,100 mm Max working height: 45 mm Manual fence adjustment Maximum cutting width: 500 mm Fedsxu E Ruepfx Af Djpc Safety light barriers

Condition: excellent (used), functionality: fully functional, cutting length (max.): 2,600 mm, AUTOMATIC HYDRAULIC GUILLOTINE fo veneer model MONGUZZI TRA 2600 second hand machine volt. 380/50 working conditions : good technical details : max. useful cutting length mm. 2650 max. useful cutting heigth mm. 100 max. useful cutting width mm. 1000 Fpsdpfxjfftuws Af Doc min. useful cutting width mm. 40 hydraulic motor power Hp 5,5 net weigth kgs. 2600 CE mark : NO

Condition: good (used), cutting length (max.): 3,600 mm, overall weight: 4,000 kg, Cutting length (max.) 3600 mm Fpsdjwv Eiijpfx Af Doc

Condition: like new (used), Working width 3600 mm Maximum height 70 mm Hydraulic cutting Photoelectric safety guard Motor power 7.5 kW Fedpfx Aoxz Rmzof Dspc CE certification 400 V Year of manufacture 2022 Weight 6200 kg

Condition: good (used), Code: 0063 Brand: MONGUZZI Model: TRA-OLM 2600 - Norme CE Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy structure essential to guarantee a precise and quality cut Pressure and lowering speed of the presser and blade holder independently adjustable via hydraulic valves Cutting length mm 2650 Presser opening mm 80 Cutting execution time 4 sec Presser width mm 340 ideal for blocking any type of veneer Cutting display light Photocells and safety barriers Installed power Kw 10 Work surface height mm 930 Fsdpfx Aov Igtbsf Dopc Automatic numerically controlled rear register with programs Sliding on quality linear guides Side button panel for processing the end cutting side Rear safety nets Overall dimensions of assembled machine mm 4100 x 2450 x 1750 h Machine dimensions for transport mm 4100 x 1800 x 1750 h Weight kg 4000

Condition: good (used), functionality: fully functional, cutting length: 2800 mm Fodpfx Afew D Nq Hj Dopc rear guide

Condition: reconditioned (used), Year of construction: 1985, cutting length (max.): 3,200 mm, cutting width (max.): 450 mm, cutting height (max.): 65 mm, overall weight: 4,800 kg, total length: 5,200 mm, equipped with protective photocell barrier Fpsdpfx Aowy Ukqjf Djc

Condition: repair required (used), Year of construction: 1997, Brand: Casati Model: Z1000 Machine no: 9709021 Fpodpfevw Tnksx Af Doc Year of manufacture: 1997

Condition: good (used), Year of construction: 1981, functionality: fully functional, JOSTING EFS 2600 Veneer Shear Year of manufacture: 1981 S/N 9443 Manufacturer: JOSTING Maschinenfabrik GmbH & Co. KG Model: EFS 2600 Good condition Purpose: Precise cutting and trimming of veneer sheets and veneer bundles Technical specifications: Cutting length: 2,600 mm (effective cutting width) Material thickness: up to approx. 3 mm (depending on veneer type and condition) Drive: Electric motor drive via belt and eccentric shaft Cutting principle: Upper blade moves vertically against a fixed lower blade (guillotine cut) Blades: High-quality high-speed steel (HSS), ground and replaceable Feed mechanism: Manual or optionally pneumatic/hydraulic, depending on the model Table height: approx. 850 mm (ergonomic for Operator) Backgauge: Manually adjustable with scale; Optionally available with digital display or motorized adjustment Operation: Two-hand safety control with emergency stop button Foot pedal for the clamp on certain models Clamp: Mechanical or pneumatic, ensures precise fixation of the veneer stack Safety features: Two-hand operation Emergency stop Protective covers Electrical connection: 400 V / 3 Ph / 50 Hz Fpjdowmxmvepfx Af Dec Power rating: approx. 4–5 kW Weight: approx. 1,800–2,000 kg Dimensions (L x W x H): approx. 3,400 x 1,300 x 1,700 mm Special features: Solid, torsion-resistant welded construction High repeatability for serial cuts Suitable for all common veneer types (beech, oak, maple, exotic woods, etc.) Areas of application: Veneer processing in joineries and Furniture factories Veneer production and sorting Interior and vehicle fittings (e.g., for yachts)

Condition: used, functionality: fully functional, cutting length (max.): 1,000 mm, This manual veneer shear is in very good condition and fully functional. It is currently located in Plankstadt near Heidelberg, but will be relocated to Bisperode near Hameln on 19.07.25, unless sold earlier. Fsdpswylhgefx Af Dspc

Condition: good (used), Year of construction: 1994, functionality: fully functional, cutting length (max.): 3,100 mm, cutting height (max.): 45 mm, overall weight: 2,300 kg, Veneer shears with a maximum cutting length of 3100 mm Maximum thickness 45 mm Fedpfx Aov Nzpmef Dspc Built in 1994 With spare blade

Condition: used, Savi cutter working width mm. 700 Fpjdpfxeq Tx R Ns Af Dec

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 209070, CASATI BIT 900/2000 veneer cross-cutting machine. Fully functional. Fedpfx Ajuna E Hof Dopc