Used other equipment for sawmills for sale (53)

Condition: like new (used), Used belt conveyor in good condition Islhccqsfh Inwjpoaw

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 380 V, input current: 32 A, cutting height (max.): 800 mm, cutting width (max.): 900 mm, This sawmill includes: 2 x clamping devices 4 x vertical stops 4 x leveling devices with clamps 3 x log lifting arms 1 x pre-cutter 1 x log roll with drive 1 x saw blade lubrication system 1 x water lubrication system 1 x electric positioning control Basic cutting length: 7.1 m Log passage width: approx. 90 cm Iaolozk Exdohccqpjw Hydraulic pump: 17 liters Motor power: 18 kW Saw blade width: 100 mm

Condition: excellent (used), For sale: FINSCAN moisture meter scan moisture meter, measures dried lumber. (these pictures are just as reference, the Finscan for sale is exact same) Available for delivery July 2026 Iaslhcozdq Nnecqpsw Located in Finland.

Condition: reconditioned (used), A completely refurbished infeed for Resaw in excellent condition Ielhcohpyakjcqpoaw

Year of construction: 1993, condition: ready for operation (used), Various old sawmill machines are available. 1) Costa Leonard twin-shaft saw, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Esterer WD step feeder, max. log length: 6000mm. 3) Esterer HD 30 saw frame, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Zeno drum chipper, drive power: 55kW. 5) Zimac board stacking machine, working length range: 800mm-3000mm. 6) Schicks steel chimney, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible. Ielhcceyw Sv Eoqpoaw

Condition: new, 2 new, two-part gang saw bottom rollers, 250 mm diameter, bore 105 mm, 685 mm long Islhccqjyctwtepjaw

Condition: excellent (used), HHydraulic drive variator with 3.0 kW motor, 1450 rpm, with reduction gear for speed reduction, electric adjustment via worm gear motor, output speed 0 to 25 rpm, output torque 1200 Nm at 14 rpm or approx. 3 kW at 14 to 25 rpm Ijlhccjx U Tfpeqpjaw

Condition: reconditioned (used), Total length 550 mm including 2 hydraulic side pressure registers and 2 adjustment registers for frame posts 70 mm, max. tensioning force per saw blade 6.5 tonnes If required: Ielhcsr Ezyxocqpjaw Magnetic gauges with 3 tubes, 2 magnets and 1 hole for insert sheets are in stock for the following wood dimensions: 18/20/24/25.5/38/40/45/48/50/58/60 and 75 mm, as well as inserts with 12 mm Ø fixing bolts in various widths from 2 to 12 mm

Condition: used, Wood sawmill 1/26 Ielhezkh N Soccqpjaw

Condition: used, Wood sawmill 2/26 Iaelozkh N Eohccqpsw

Condition: used, Wide selection of used spare parts in good to very good condition for EWD Esterer HDE 71. Overhang plates, adjustment gearboxes for overhang adjustment, complete feed unit, saw frame, roller shafts with sprockets, hydraulic cylinders for roller lifting, chain housing, etc. Islhccjzht Hwsqpeaw

Condition: used, heavy-duty gate tension car, manufactured by Linck, type Va, with auxiliary car Vy. Iolhec Ulvbsccqpeaw

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Iajlhcozf Nbxocqpjw

Condition: used, length in total ca. 3.270 mm material thickness 50 mm center distance ca. 3.020 mm Connecting rod / gate strut / connecting rod as a spare part for a Wurster & Dietz GXV 71 or EWD gate. D1: 190 mm D2: 150 mm. Iaslholf H Uzeccqpsw

Condition: used, Meassuring frame for logs and timber type Rema 9001 Maximum meassuring field 700 mm Iolhccozd Azveqpjaw

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 56 or SS 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56 Iaolhccqow Eu Akopjw

Condition: excellent (used), Hydraulic feed unit 2DA1F with 2.2 kW motor, 1430 rpm, with planetary reduction gearbox for speed reduction, electric adjustment via worm gear motor, Hydraulic feed unit 2D35ZK with 4 kW motor, with bevel gearbox, control lever with 2 sensors, e.g. for SCHULTE HB 12 band saw Ijlhccelxzhtsqpeaw

Condition: excellent (used), functionality: fully functional, Robust EWD reduction gearbox for gate drive. Shaft 100 mm. Pulleys 900 x 280 and 560 x 450 mm. Pulleys attached to the shaft with tensioning elements. Used for 2 years. Suitable for all EWD / Esterer gates. Ijlhcszdiq Secqpoaw

Condition: excellent (used), Year of construction: 2013, Chipper for producing cellulose or fuel chips manufactured by Heinola Finland. Drum diameter 900 mm Inlet width 700 mm Capacity up to 110 m3 per hour with max motor power Suitable motor powers: 70 to 160 kW Iaelhcjxxql Eecqpow

Condition: excellent (used), Finscan Nova and a CGV full trimmer Iolhcjwq A Edscqpeaw

Condition: reconditioned (used), Totally renovated Log Haul Conveyor 8 Meters long Iaolhcsncft Ujcqpsw

Condition: good (used), Saw frame, guide rails, connecting rods, feed rollers, new roller shafts, racks, new rack heads, roller lifting hydraulic unit, gang saw frame stand with overhang plates, gang saw flywheel assembly, tight pulley and free-running pulley with bushing and many more parts Iaslhcjwhv Rnecqpow

Condition: refurbished (used), 2 pieces 125 mm Ø x 170 mm Ø x 173 mm long 1 piece 140 mm Ø x 190 mm Ø x 173 mm long Iolhccqengz N Iepsaw

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, Chips and bark sorting screen, screening area 6,7 m2, el.motor 3 kW, capacity up to 150 m3/h, delivery includes metal frame. Iolhccqswktyfepsaw

Condition: ready for operation (used), Metaldetector with electric -operating cabinet, inner diam. 1000 mm Iolhcsx Agttjcqpoaw