Used Gas engines for sale (4)

Condition: ready for operation (used), Year of construction: 2009, operating hours: 63,000 h, Functionality: fully functional, machine/vehicle number: TCG 2020 V12K, power: 1,080 kW (1,468.39 HP), number of cylinders: 12, cubic capacity: 5 cm³, nominal power: 1,080 kW (1,468.39 HP), rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, overall weight: 13,000 kg, total length: 7,000 mm, total width: 2,000 mm, total height: 2,300 mm, type of cooling: water, protection type (IP code): IP44, For sale are 3 CHP engines of the MWM brand of the type TCG 2020 V12K. The CHP system (3 modules) are for sale both individually and with the associated peripherals (auxiliary drive cabinets, central system control, exhaust gas heat boiler of 800 kg/hour, 3-pass chimney, table cooler, emergency cooler, water-based cooling register for intake air, fresh oil tank, used oil tank and all pumps and units). Kjljvtqc Dehcdwvelr For island operation, 1 x 20 KVA low-voltage supply is available for each CHP. Various spare parts available.

Condition: as good as new (ex-display), Sold are pistons complete for Scania DC13 gas. These are original components from Scania. The pistons were removed from new engines. Included are: Piston Kolhcdweivzv Iovolr Piston pin Circlips Piston ring set The piston set is ready to use. Price per piece: 550,00€ net VB There are a total of 540 pieces available Europe-wide shipping is possible against payment of costs. Sale exclusively to traders under the express exclusion of warranty and liability for material defects.

Condition: new, Functionality: fully functional, fuel type: gas, Year of construction: 2024, We offer a choice of natural gas or biogas engines from the manufacturer Liebherr. Type G9512 Standard scope of delivery -starter -Cylinder heads -Exhaust manifolds and elbows -Turbocharger -Intercooler -Control valve (without actuator) -without gas mixer Klslhcstpw Ecjdwver -without engine control and ignition system -without charge air line The engines are equipped with the following sensors: -single cylinder temperature monitoring -engine oil temperature sensor -engine oil pressure sensor -RPM sensor (2 pieces) -ignition signal transmitter -Mixture temperature sensor -mixture pressure sensor -Coolant temperature sensor -coolant pressure sensor

Condition: new, Year of construction: 2024, Functionality: fully functional, Standard scope of delivery • Four-stroke gas engine based on MAN Individual cylinder heads with 4V technology, bottom-mounted camshaft and roller pushrods - Engine width: 1,243mm - Engine length: 1,748mm - Engine height: 1,500mm Klslhcdjtpw Dfjwver - Compression ratio 14:1, special gas - Speed 1500rpm - Oil module consisting of radiator, filter and crankcase ventilation One oil module per cylinder bank Crankcase ventilation is integrated at the factory • Oil pump in rotor pump design One oil pump per cylinder bank - Flywheel housing SAE 1 flywheel I = 2.49 kgm2 with ring gear - Starter 24 V / 7.0 kW • Camshaft with encoder disk for electric ignition system • Dry exhaust pipe with contact protection - Exhaust gas turbocharger with water-cooled turbine housing, water-cooled bearing bracket and pressure oil lubrication • Two-stage mixture cooler • Mechanical throttle valve without actuator upstream of mixture cooler - Lubricating oil pan with 102 l volume and filler neck • without thermostat housing • Cover for front crankshaft end - 2x exhaust gas temperature sensor - 1x coolant temperature sensor - inlet - 1x coolant temperature sensor - outlet - 2x oil pressure sensor - 2x oil temperature sensor - 2x connecting cable for exhaust gas temperature sensor, length 5 m - 4x connecting cable for temperature sensor, length 5 m - 2x connecting cable for oil pressure sensor, length 5 m • engine feet GS • Standard MAN factory approval with natural gas “H” • without Oil filling • engine openings with sealing cap • Type plate German / English • Paint, light gray RAL 7035 1x combined charge air sensor for pressure and temperature 2x exhaust gas temperature sensor 1x coolant temperature sensor - inlet 1x coolant temperature sensor - outlet 2x oil pressure sensor 2x oil temperature sensor