Condition: used, Year of construction: 1985, Capacity 220/120mm 4 positions Delrfiaet Ilnyj Rjut Digital positioning 380V Sold as is

Condition: used, Year of construction: 1965, Functionality: fully functional, machine/vehicle number: 8650, planing width: 605 mm, height adjustment type: electric, Kupfermühle 4-Sided Planer Delrfiov Rfpmsa Rsut -Type VUIN -Machine number: 8650 -Top and bottom cutter blocks -2 milling units (left, right) -1 additional milling unit -Long table and ruler extension -Moving scale for reading the working width -Loading possible -Price ex works

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 6, power: 46 kW (62.54 HP), frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Profimat 23 E 260 Working width: 260 mm, Working height: 170 mm, 5 spindles, Spindle diameter: 40 mm, Spindle arrangement: 1- Bottom - 7.5 kW 2- Right + 3- Left - 11 kW Delrfisvugg Ija Reut 4- Top - 11 kW 5- Bottom - 5.5 kW 6- Chamfering unit, mounted at a 45° angle on the upper horizontal spindle, 1.5 kW, 12,000 rpm Feed rate: 6 – 24 m/min - 4 kW Air cushion in the table One driven roller in the table at the exit. With tool

Condition: good (used), Year of construction: 1998, Functionality: fully functional, spindle diameter: 40 mm, working width: 230 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 36 m/min, planing width: 20 mm, height adjustment type: electric, planing height: 160 mm, working height: 8 mm, Equipment: cabin, motor brake, Weinig Unimat 23 E 6 Head planer moulder. Bottom head - 10hp Fence + near head -15hp (common motor) 1st top head - 15hp 2nd top head - 15hp 2nd bottom head - 10hp Spindle speed - 6000rpm Feed speed - min/5 + max/36 meters per minute Working width - min 20mm + max 230mm Working height - min 8 mm + max 160mm Delrfsv A Rpcoia Rout Spindle diameter - 40mm The machine is currently still in use and viewing is more than welcome.

Condition: excellent (used), Year of construction: 1995, Planer - Moulder Manufacturer: Weinig Type: Profimat 23 Year of manufacture: 1995 Working width: 230 mm Working height: 120 mm Planing table length: 2,000 mm Speeds: 6,000 rpm Spindle diameter: 40 mm Feed speed: 4 - 24 m/min Number of shafts: 6 Grooving saw: Yes Arrangement: U-R-L-R-O-U-grooving saw 1st shaft, bottom, 7.5 kW 2/3rd Shaft, right, left, 7.5 kW 4th shaft right, 7.5 kW 5th shaft top, 7.5 kW 6th shaft, bottom, 4.6 kW Groove saw: 2.2 kW Dimensions: approx. 4,500 - 2,000 - 1,800 mm Dujlsv Id Ngsrfia Rot Weight: approx. 3.5 tons

Condition: used, Year of construction: 1993, machine/vehicle number: AB/70595, max. Arbeitsbreite : 180 mm max. Arbeitshöhe : 105 mm Spindelanzahl : 4 Stk 1. Spindel : unten 2. Spindel : rechts 3. Spindel : links Duslrjvfilhofia Rst 4. Spindel : oben Hoch- Tiefverstellung der oberen Spindel : manuell Vorschubgeschwindigkeit : 6/12 m/min

Condition: ready for operation (used), Year of construction: 1991, The machine is in perfect working condition. Demonstration on site or live video are possible Delsv T U Rrorfia Reut

Condition: like new (used), Year of construction: 2024, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been inspected by our specialist staff and is in mint condition. Technical specifications: - Planing thickness width 410 mm - 3 knife blocks (reversible knives) - Dual folding planing tables - Planer stop pivots 90-45° - Thicknessing height 4-225 mm - 5.5 HP (4 kW) motor / 400 volts - Year of manufacture 2024 Dolrev Scx Ujfia Reut - Machine number 52.02.285.24 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: planer, thicknesser, planer, planing, thicknessing Reference: R-L0J2U

Condition: used, machine/vehicle number: G-ADHM115775cP, AD planing machine Holzprofi STÖ410, 410 mm planing width, 4 blade shaft Djlrfsvw Ebijia Reut Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), POWERMAT 400 MOULDER WITH 7 IN. Serial number: 114741 / M Motor power: 76 kw Capacity ( mm ): 230 mm x 120 mm Work groups: 7 1st group jointer 2nd right-hand spindle moulder group 3rd group left-hand spindle moulder 4th group 2nd right-hand spindle moulder 5th group planer 6th group 2nd upper horizontal shaft 7th group lower horizontal spindle Dimension of infeed table: 2000 mm Numerical control on swivelling console WEINIG EASYCOM digital control INTEL ATOM processor 8'' TFT screen With mouse - Inverter speeds - Electrical and digital downfeed Digital counter - Cutting tools: 4 tool holders with 4 sharpenable blades Special features: Workpiece feedback to operator - Bruchless motors with digital positioning Grooved table ( better guidance of short wood ) Profiling hood ( max. diameter 180 mm ) Independent pneumatic pressure on 6 motorized drive units Pneumatic pressure of 3 lower motorized drive groups Front motorized drive unit with 3 retractable rollers Pneumatic pressure of the input pressure shoes of the 2 upper horizontal shafts Automatic speed variator - Hydraulic spindle clamping nut Centralized axis lubrication - Automatic table lubrication Automatic lubrication of grooved guides Suction diameter: 7 of 140 mm Machine dimensions 4300 mm x 1800 mm with workpiece return 6500 mm x 2500 mm Motorized movement of all axes with digital display on the front of the frame with operator action On-screen visualization of all axis positions for control and data recording data, straight planing or moulding profile Digitizing of working width and height (2 axes) Power supply: 5 G Duelrfiaou U Dx Ne Ret

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Automatic profiling planer - Weinig Powermat 700 with window production package Powerlock, CNC, 8000 rpm (except the first spindle) Powercom Plus Machine manufactured in 2017. Purchased new from Weinig Polska. The machine is in continuous operation until June 2025 - interested parties are invited to inspect it during operation. Throughout the period of operation, the machine is under the care of an authorized Weinig service. For those interested, I will send a full portfolio of the machine with additional photos by email. The price for which we want to sell this machine is approximately 50% of the value of a new machine with the same configuration. Duslrev Rx Upofia Ret

Condition: excellent (used), Year of construction: 1999, Four Side Planer Weinig Unimat 23 Technical Data: - Planing width: 230 mm - Planing height: 160 mm Spindle Configuration: 1. Bottom 2. Right 3. Left 4. Right 5. Left 6. Top 7. Bottom 8. Top 9. Bottom 10. Universal Dsljt Dc Iiorfia Rjut

Condition: good (used), planing width: 600 mm, table length: 2,500 mm, Bäuerle Surface Planer -Planing width 600 mm -Table length 2500 mm -Year of manufacture unknown -Price ex works Dujlrfisv Nv Dxea Rjt -Loading available

Condition: used, Probably a set for making special tongue and groove connections for hand feed. knife: Various Dslrfiasvxgf Ee Rout flight circle (ø): 250 – 284 mm drilling: 40 mm material: steel

Condition: excellent (used), First lower head: 5.5 kW motor Second side head: 5.5 kW motor Third side head: 7.5 kW motor Fourth side head: 4 kW motor Fifth upper head: 7.5 kW motor Sixth lower head: 5.5 kW motor Seventh universal head: 7.5 kW motor Eighth universal head: 7.5 kW motor Working width: 26 cm Working height: 12 cm Feed speed 40 m/min max Dujlrfioup Ac Dsa Ret 3 low-speed rollers in the table

Condition: excellent (used), Technical data: Max planing width: 400 mm Max planing height: 240 mm Knife shaft diameter: 120 mm Number of knives: 4 Feed speed: 6-12 m/min Manual lifting Extraction port: 110 mm Power supply: 400 V Motor power: 10 kW Overall dimensions: Length: 2200 mm Dslrfev Rv Dbeia Rjut Width: 860 mm Height: 1250 mm

Condition: ready for operation (used), Year of construction: 1985, The machine is in good technical condition. Planing width 600 mm. Planing height on 4 sides 110 mm. 180 mm on 2 sides. Duelrfovrll Deia Rst

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Weinig Unimat 23 EL Four-Sided Planer (7 Heads) Year of Manufacture: 2005 Technical Condition: Very good Technical Specifications: - Working width: up to 230 mm - Working height: up to 140 mm - Number of spindles: 7 - Spindle arrangement: - Bottom horizontal - Right vertical - Left vertical - Top horizontal - Bottom horizontal - Top horizontal - Bottom horizontal - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm - Feed speed: stepless adjustment, from 5 to 24 m/min - Infeed table length: 1,970 mm Spindle motor power: - Bottom horizontal: 5.5 kW - Right and left vertical: 7.5 kW - Top horizontal: 7.5 kW - Total installed power: 67 kW For an additional fee, installation, commissioning, and training on machine operation are available. We also offer ongoing maintenance services. Duelrfiasv Nvr Nj Rst

Condition: repair required (used), Functionality: limited functionality, total width: 1,000 mm, total height: 1,100 mm, total length: 1,300 mm, planing width: 510 mm, height adjustment type: electric, number of blades: 4, * working width - 510 mm * working height - 220 mm * 4-knife roller for conventional knives Dujlottbccerfia Rjt * electronic thickness indicator * infinitely adjustable feed speed in the range of 4-16 m/min * one outfeed of steel rollers behind the planer shaft * electric up/down adjustment * table top on 4 screws * original painting * Output for sawdust extraction fi 160 mm. * overall dimensions 100 x 130 x 110 cm ( W x L x H ). * the machine works, works, but falls into vibration.

Condition: new, Compact planer and moulder SCM Profiset 40 for four-sided planing, special price including planing heads. * Complete set of planing heads and rebate cutters * CE version * New machine with guarantee * Immediately from stock: Tauberbischofsheim. spindle: 4 working width: 180 mm working height: 105 mm spindle 1: Bottom / 7.5 kW / 35 mm spindle 2: Right / 7.5 kW / 35 mm spindle 3: Left / 7.5 kW / 35 mm spindle 4: Top / 7.5 kW / 35 mm control: electronic Control: electronic Automatic positioning: with 99 storable programs feed: max.: 12 m/min. Dolrfievw Uyhea Rout Dressing table length: 2.300 mm More technical data: see PDF Further technical data: see PDF

Condition: new, Main features of the machine: Thicknesser TH 530 is a simple, solid construction intended for everyday work in the workshop, with a planer shaft width of 530 mm. It is characterized by a large massive ribbed cast iron table, which eliminates any vibrations during operation. The machine has an extremely powerful motor that drives the cutter heads (notched knives), which make the process of planing the most difficult wooden elements an easy task. Each knife is easy to replace if worn or damaged. Moving the table up and down is automatic after entering the appropriate dimensions. The sum of these many advantages gives the possibility of very precise machining settings. Advantages: Worktable mounted on 4 bolts Controller for automatic table height adjustment Planer shaft o120, 4 knives The possibility of cutting large dimensions Max planing width: 530 mm Max planing height: 300 mm Min length of the planed element: 400 mm Knife shaft diameter: 120 mm 2 rolls in the table top Number of knives: 4 The dimensions of the knives: 530x30x3 mm Knife shaft speed: 5000 rpm Power supply: 400V Total power: 5.8 kW 2 feed speed Electric Lifting Extraction port: 150 mm The machine is available immediately! Machine dimensions Length: 1000 mm Width: 1000 mm Duolrfishhnfwea Rot Height: 1160 mm

Condition: ready for operation (used), Functionality: fully functional, planing width: 630 mm, total length: 1,000 mm, total height: 1,150 mm, total width: 1,350 mm, overall weight: 900 kg, table length: 1,000 mm, chip removal for surfacing (max.): 130 mm, STETON R630 thicknesser Specifications: - condition - used - manufacturer - STETON - model - r630 i - max working width - 630 mm - max working height - 240 mm - length of worktop - 950 mm - main motor power - 7,5 kW - star-delta start-up - shaft for 4 traditional knives - thin - one sliding roller in the lower worktop - top pulling roller - spiral - two steel rollers behind planer shaft - electric up/down adjustment - analogue planing thickness indicator - table top supported on four screws - diameter of planer shaft - 120 mm - rotational speed of the planer shaft - 5000 rpm - feed speed continuously adjustable by variator - diameter of the exhaust stub - 130 mm - weight - approx. 900 kg - overall dimensions - 100 x 135 x 115 cm ( W x L x H ) Additional information: - the machine is in good technical condition, ready for immediate use - the pictures show the actual state of the object of sale Duslrfieurlbusa Rst - possibility to turn on and check the machine on site. - the price given in the auction does not include VAT and transportation costs

Condition: used, knife: planer blade Z4 flight circle (ø): 125 mm drilling: 35 mm length: 170 mm material: steel Duelsvw Uv Aerfia Rst

Condition: new, The durable planer from the SR series is a machine thanks to which we can adjust the thickness workpiece from the bottom side, the maximum workpiece width is 330/430/530 mm. The high-performance 4 kW motor and the cutting block with four blades ensure high performance quality work and obtaining perfectly straight surfaces. Duslrfslqwwheia Rot Technical data: Planing width: 530 mm Knife shaft diameter: 120 mm Number of knives: 4 Knife shaft speed: 4700 rpm Tilting guide: 0-45° Total length of the table: 2700 mm Max thickness of the workpiece: 5 mm Extraction port diameter: 150 mm Motor power: 4 kW Engine speed: 2880 rpm NEW machine Overall dimensions: Length: 2760mm Width: 920mm Height: 1130mm

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, total width: 900 mm, total height: 1,100 mm, total length: 2,615 mm, total length of planing tables: 2,615 mm, overall weight: 562 kg, extraction nozzle diameter: 120 mm, planing height: 8 mm, type of input current: three-phase, number of planer blades: 4, Equipment: motor brake, MDD is a rapidly growing company specializing in the sale of used woodworking machinery and wood products, lumber and logs. With years of experience and extensive technical knowledge, MDD offers its customers top-quality equipment that combines performance with reliability. Our product range includes a wide selection of machines such as saws, milling machines, planers and many others, meeting the needs of both small workshops and large manufacturing plants. We care about the satisfaction of our customers, providing them not only with proven equipment, but also with expert advice and comprehensive service. Trust the professionals and choose MDD - your partner in the woodworking industry. SCM f410 nova planing machine Specifications: - condition - used - manufacturer - SCM - model - f410 - working width - 410 mm - length of worktops - 2615 mm - culaga adjustable at an angle - engine power - 5.0 kW - spindle speed - 5000 rpm - chip thickness indicator Duolreuu R I Ssfia Rot - max thickness of collection - 8 mm - manually adjustable tops - silencing combs at the shaft - brake on the motor - safety guard over the shaft - 4 knife shaft with diameter 120 mm for Tersa system knives - start-up - 0-1 - outlet for sawdust extraction - fi 120 mm - 2022 year of production - weight - 562 kg - sets of documents from the manufacturer - overall dimensions 261.5 x 90 x 110 cm ( L x W x H )