Used Hydraulic presses single column for sale (61)

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm Bs Ia Unjvc Ax Nexiewl total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: new, Year of construction: 2021, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Hydraulic 17 T single column press Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec. Bo Isgrki Soa Unxiowl d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by knob ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 170 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Dimensions Max. Opening width 250 mm Stroke and min. opening 100 mm Table height above floor 850 mm Height above floor (headroom) approx. 2200 mm Hall height min. 2.500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of press without operating materials approx. 1 to Speeds Fast closing with 10 mmSec. Press speed 10 - 0 mmSec Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pcs. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 100 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage hydraulic pumps 24 24 V DC V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Design The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively. Hydraulic unit The hydraulic system is mounted on the top of the press. Safety devices For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version. Electrical system / control system The control cabinet with control, power and safety components is located on the right side of the press. The press is operated by a hand lever control.

Condition: good (used), Pressure 63to Stroke -400mm Distance ram-table 700mm Table size 1800x500mm MARCELS MASCHINEN CH Bs Ioch Dacja Unxiewl

Year of construction: 1979, Condition: used, machine/vehicle number: 3534, Pressing force: 630 kN Return force: 100 kN max. ram stroke: 200 mm Installation height: 400 mm Be Iob Hk Dzsa Unxiowl Projection approx.: 350 mm table size: 610 x 800 mm drop-through hole in the table: 100 mm Drill hole for stool: 40 mm speed of the pusher: 350 mm/s Pressing speed: 18 mm/s Boiler speed return: 380 mm/s Hydraulic drive: 380 V, 15 kW space requirement: 1800 x 920 x 2440 mm Weight: 3,94 t

Condition: used, AGOSTINO COLOMBO G250 Bs Ia Ujv Sya Aenxijwl

Condition: new, Year of construction: 2025, throat depth: 375 mm, pressing force: 200 t, table width: 750 mm, table length: 1,000 mm, table height above floor: 850 mm, Equipment: safety light barrier, STANDARD FEATURES - Vibration method stress / welding tension relieved steel construction body and parts - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system Bwj Iajvzkvgo Unxiel TECHNICAL SPECIFICATIONS MODEL CHCP 200 PRESSURE (TONS) 200 STROKE (MM) 800 THROAT DEPTH (MM) 375 TABLE – RAM DISTANCE (MM) 900 TABLE DIMENSION (MM) 750X1000 PRESS DEPTH (MM) 1500 PRESS WIDTH (MM) 850 TABLE HEIGHY FROM FLOOR (MM) 850 PRESS HEIGHT (MM) 2900 MAIN CYLINDER DIAMETER (MM) 320 ENGINE POWER (KW) 22 WEIGHT (KG) 11500 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 2 (TWO) MONTHS DEPENDING ON ORDER PRODUCTION FROM 40 TONS TO 200 TONS IS AVAILABLE.

Condition: used, Year of construction: 1983, Technical details: Bj Iaju Nfvuj Unxiswl Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: new, Year of construction: 2022, Estimated Equipment Weight 3500 Kg Equipment Dimensions (front x depth x height) (Ca. Aussenmasse) 1354 x 2005 x 2595 mm Table Dimensions (Useful Area) front x depth (Tischgroesse) Ø1050 mm Opening between table and hammer (Daylight) 350 mm Hammer stroke (Stoessel-Verfahrweg) 300 mm Drive power (Leistung in KW) 14,24 Kw Motor Rotation 1500,00 RPM Pump Flow 44,50 LPM Bwj Ia Unshmi T Usxijl Pump Motor Ratio 27,59 cm³/Rot Working Force (Zylinderleistung) 100,00 Ton Return Force (Rückzugskraft) 10 Ton Forward Speed 250 mm/s Working Speed with Pressure (Arbeitsgeschwindigkeit) 3~15 mm/s Return speed (Hebegeschwindigkeit) 150 mm/s Working Pressure (Maximaler Arbeitsdruck) 210,00 Bar Cylinder quantity 2 pc Stem Diameter 41,76 mm Cylinder Diameter 250,97 mm Cylinder stroke (Stoessel-Verfahrweg) 300,00 mm Reservoir Capacity (Volumen des Oeltanks) 350,00 Liters Extractor Cylinder 5,00 T Cylinder travel (Stoessel-Verfahrweg) 150,00 mm

Condition: excellent (used), total height: 3,950 mm, Hydraulic press single column PHY 160 C with die cushion, year of manufacture 2007 - latest UVV - machine can be repainted on request Pressing force: 160 t Installation height: 800 mm Stroke: 600 mm Table size: 1000 x 700 mm Drawing cushion: 40 t; stroke: 300 mm Weight: 11 t Connection: 22 KW - path - pressure - time - dependent ram setting - light curtain (single-stroke, two-stroke, protective operation) - vibration feet Bo Ijvy U Eioa Unxiewl

Condition: ready for operation (used), Year of construction: 1965, Available immediately from location : Hydraulic single column press WMW Zeulenroda Type PYE 160 S Year of construction 1965 General overhaul in 2006 Pressure capacity 160 tons Table 900 x 620 mm Distance table - ram 800 mm ram stroke 500 mm ram from rapid traverse 200 mm/s ram to 125 mm/s Bj Iasvxig Eo Unxijwl Drive 17.5 kw Weight 8.5 tons At a price of Euro 4,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 2000, Pressing force: 1250kN, closing speed: 450mm/s, working speed: 21mm/s, stroke length: 590mm, dry weight: 15000kg. The hydraulic press has a defect in the tool holder, they must be fixated with clamping claws. Documentation available. On-site inspection is possible. Bwe Ia Unetqu Uxoxiel

Condition: new, Year of construction: 2025, throat depth: 350 mm, pressing force: 150 t, table width: 700 mm, table length: 1,000 mm, table height above floor: 850 mm, Equipment: safety light barrier, STANDARD FEATURES - Vibration method stress / welding tension relieved steel construction body and parts - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS MODEL CHCP 150 PRESSURE (TONE) 150 STROKE (MM) 700 Bj Ia Unovzkvaexiowl THROAT DEPTH (MM) 350 TABLE – RAM DISTANCE (MM) 800 TABLE DIMENSION (MM) 700X1000 PRESS DEPTH (MM) 1400 PRESS WIDTH (MM) 800 TABLE HEIGHY FROM FLOOR (MM) 850 PRESS HEIGHT (MM) 2800 MAIN CYLINDER DIAMETER (MM) 280 ENGINE POWER (KW) 18.5 WEIGHT (KG) 10500 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 2 (TWO) MONTHS DEPENDING ON ORDER PRODUCTION FROM 40 TONS TO 200 TONS IS AVAILABLE.

Condition: used, Year of construction: 1999, machine/vehicle number: 042-036/4, Press capacity: 100 ton Throat depth: 360 mm Stroke: 500 mm Daylight: 800 mm Slide area: 530 x 400 mm Table surface area : 750 x 560 mm Hole in table: 200 mm Table height over floor: 710 mm Bwj Ievakd Usa Unxiol Working speed: 10 mm / sec Approach speed: 150 mm / sec Return speed: 150 mm / sec Required power: 17 kW Dimensions L x W x H: 1.400 x 2.000 x 3.200 mm Weight of machine approx.: 5,1 ton

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: DF0195 - Rev.00, pressure:40 t passage width:850 mm stroke:500 mm Weight of machine approx.:ca. 3,8 t Bwj Iajfhcc Ho Unxiel dimensions:ca.1300 x 1800 x 3200 mm return capacity:4 t pestle plate:600 x 450 mm table plate:750 x 720 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) max. working heidht:700 mm motor capacity:12,7 kW Approaching Speed max. :140 mm/sec pressure speed:15 mm/sec Return Speed:140 mm/sec Oil Tank Capacity:160 l Monitor:WEG - 10 Zoll Siemens Control System:S7 1200

Condition: used, Year of construction: 1990, pressure 25 t throat 250 mm Be Ia Ujt Hw Ezjnxiowl stroke 100 mm total power requirement 7,5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 1000 x 1700 x 2600 m

Condition: ready for operation (used), Functionality: limited functionality, machine/vehicle number: 088-030 | 159, pressing force: 3 t, table width: 280 mm, table length: 280 mm, operating speed: 100 mm/s, overall weight: 370 kg, reverse speed: 300 mm/s, ram stroke: 280 mm, retraction force: 1 t, input voltage: 380 V, Manufacturer: VEB Wema Zeulenroda Type: PYTE 3.15 Bo Ia Unsuclhnoxiowl Maximum pressing force: 3.15 tons Lower table: 280 x 280 mm Cylinder stroke: 280 mm Downward speed: 100 mm/sec Upward speed: 300 mm/sec Power requirement: 1.5 kW Weight: 370 kg Hydraulic press with mechanical two-hand operation or switchable to mechanical foot operation. Both operating variants act directly on the hydraulic control valve. The design is very robust and durable. The press is ready for immediate use and in good condition. With mechanical two-hand operation, both levers must be pulled in exactly the same way (see video), otherwise the press will not lower. This is why we mainly worked with the foot operation. The pressure indicator is defective and would have to be replaced if necessary.

Condition: new, Year of construction: 2024, Capacity: 1000 kN (100 tons - at 245 Bar) Main Motor: 11 kW - / 1500 rpm Main Pump: 18 cc = 27 L/min Speed: Forward: 110 mm/s – Pressure: 12 – 5 mm – Return: 140 mm/s Installation Height: 500 mm Stroke Length: 400 mm Table Plate: 600 x 800 x 100 mm / with 14 mm T-slots Ram Plate: 600 x 800 x 100 mm / with 14 mm T-slots - HYDRAULIC Accessories: Complete hydraulic accessories on top of the press. Block & Valves: REXROTH Pressure adjustment via PLC for ram Speed adjustment via PLC for ram Diagonal guidance 2 Air cooler (Temperature adjustable via screen) - CONTROL Accessories: SECOMEA - ETHERNET Connection for remote maintenance – SIEMENS Safety PLC: SICK Light sensors on the front & back of the working area (SICK – 900 mm) Movable two-hand operation Linear scale: 450 mm NOVOTECHNIK (Stroke adjustment via PLC for ram) SIEMENS S7 - 1200 PLC PLC Screen - Beijer Comfort 7" 2-fold workspace lighting - Table Height: 900 mm (floor to top edge of the table plate) Overall Dimensions: 1500 x 1750 x 2850 mm Total Weight: approx. 4,000 kg Bwe Iajttrdge Unxiol Warranty: 12 months - CUSTOMER SERVICE: Direct from manufacturer to customer 24/7

Condition: used, Year of construction: 1991, machine/vehicle number: 041-024/39, Press capacity: 63 ton Throat depth: 360 mm Stroke: 500 mm Daylight: 800 mm Table surface area : 750 x 560 mm Slide area: 630 x 400 Working speed: 60 mm / sec Return speed: 380 mm / sec Electrical connected load: 12,6 kW Bwe Iaevai R Tj Unxisl Dimensions L x W x H: 1.200 x 1.950 x 2.800 mm Weight of machine approx.: 4,3 ton

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: DF0151 - Rev.00, pressure:110 t passage width:800 mm stroke:500 mm Approx. weight (w/o operational materials):5 t Measurements L x W x H:ca. 1950 x 1510 x 3145 mm Return Capacity:11 t Engine Output:20 kW Cylinder diameter:200 mm Max Working height:700 mm Approaching Speed max. :195 mm/sec Pressure Speed:1 - 15 mm/sec. Return Speed:5 - 140 mm/sec Travel:500 mm Ram plate:800 x 600 mm Thickness of ram plaet:6 Zoll Table size:800 x 700 mm Table height above ground level (approx.):900 mm Oil Tank Capacity:400 l Program Memory:200 prgms Monitor Siemens:10 Zoll Siemens Control System:S7 1200 Lightcurtains by Schmersal:700 mm Bws Ia Uedxrqwenxiol Speed controlled via proportional valve for speeds between 5 to 195 mm/sec on approach, 1 to 15 mm/sec during pressure phase and 5 to 140 mm/sec during return. HMI - pressure regulation for capacity of hydraulic cylinder from 20 to 110 tons Siemens remote access for maintenance purposes Motor with energy efficiency level IE3 according to CE

Condition: used, Year of construction: 1971, pressure 200 t passage width NA mm stroke 180 mm table length 690 mm table width 530 mm Be Iot Hw Dwsa Unxiewl distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration

Condition: new, Year of construction: 2024, Capacity: 2500 kN (250 tons - at 245 Bar) Control Type: Two-hand operation -- Main Motor: 11 kW (IE-3) Main Pump: 45 cc = 65 L REXROTH - Axial piston pump Speed: Forward: 100 mm/s – Pressure: 10 – 3 mm – Return: 140 mm/s Installation Height ( Daylight ): 600 mm Stroke Length: 500 mm Table Plate: 1000 x 1200 x 120 mm / with T-slots Ram Plate: 1000 x 1200 x 800 mm / with T-slots -- HYDRAULIC Accessories: Complete hydraulic accessories on top of the press. Block & Valves: REXROTH Pressure adjustment via PLC for ram Speed adjustment via PLC for ram Auxiliary Motor: 2.2 kW Auxiliary Pump: 22 cc Sides of the working area enclosed with sheet metal wall 8-fold guideways for parallelism Air & circulation cooler (Temperature regulation adjustable via screen) Hydraulic ram safety Mechanical ram safety for top dead center position -- CONTROL Accessories: Main control cabinet Foldable control panel SECOMEA - ETERNET connection for remote maintenance – SIEMENS Safety PLC: SICK Light sensors on the front & back of the working area (SICK – 900 + 300 mm) Movable two-hand operation Linear scale: 650 + 450 mm NOVOTECHNIK for ram PLC screen - Beijer 10" Comfort 2-fold workspace lighting of the working area -- The press is manufactured according to CE standards (automation panel, hydraulic control, and safety standards). Automation according to CE standards - Safety PLC - Hydraulic design according to CE standards - Feedback valves. -- Table Height: 900 mm (floor to top edge of the table plate) Overall Dimensions: 2700 x 1600 x 2800 mm Total Weight: approx. 10.000 kg Warranty: 12 months -- Bo Ia Unxottrhvoiswl 24/7 CUSTOMER SERVICE (BEFORE & AFTER SALES) - from manufacturer to customer

Condition: used, machine/vehicle number: H84 - 1331, Press capacity: 16 ton Throat depth: 250 mm Stroke: 300 mm Daylight: 600 mm Be Ia Unou Iuk Eoxiewl Table surface area : 553 x 368 mm Approach speed: 121 mm / sec Return speed: 450 mm / sec Working speed: 45 mm / sec Required power: 7,5 kW

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: DF0150, pressure:63 t passage width:700 mm Bs Ia Unofhcc Uoxijwl stroke:500 mm Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: used, Year of construction: 1992, pressure 75 t throat 280 mm Bwo Ia Ust Hwrzsnxiol stroke 303 mm total power requirement 15 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 2007, machine/vehicle number: 51254-07, Press capacity: 40 ton Daylight: 550 mm Stroke: 150 mm Ram speed down: 50 mm / sec Ram speed up: 85 mm / sec Throat depth: 250 mm Table surface area: 1.400 - 4.900 x 280 mm mm Table height over floor: 900 mm Oil volume: 250 l Driving motor: 5,5 kW Dimensions L x W x H: 1.400 x 1.800 x 2.400 mm Weight of machine approx.: 2.300 kg Bwe Iaouqd Rls Unxisl Standard configuration - Press uprights in C-frame design in rigid and low-stress welded construction with integrated straightening bed- Oil tank welded into the press upright- Oil level indicator- Filling and ventilation filter- Press cylinder made of high-quality steel with honed cylinder running surface- Hardened, ground and hard chrome-plated piston rod with anti-rotation lock- Piston with DIN 810 bore for tool attachment- Modern and maintenance-friendly block design of the hydraulic system- Safety valve to protect the hydraulic system against overload- Infinitely adjustable limitation of the downward stroke with fixed upper stroke limitation- Infinitely variable adjustment of the ram return stroke (return stroke limiter)- Directional stroke control for preselection and exact reproducibility of stroke depths- Sensitive and targeted adjustment of the straightening stroke depth over the entire stroke, even at full press force- Ergonomically designed hand lever with rotary handle as central operating element for ram movement, straightening stroke setting and straightening stroke adjustment- Numerical stroke depth display for controlled setting, repetition and adjustment of the straightening stroke depth Extended machine accessories - Total press bed extension: 3,500 mm- Extension right: 1 x 500 mm and 1 x 1,250 mm- Extension left: 1 x 500 mm and 1 x 1,250 mm- Number of supports: 2 each on the right and left- Workpiece holders for centers- Rotating center punch tips MK3- Pneumatic clamping of the right quill, actuation by manual valve- Spring package for workpiece holders, 2 each for load capacity up to 20 kg and 100 kg- Straightening hammer- Pressure pieces for straightening hammer- Straightening anvils, attached to the straightening carriage- Alignment anvils, can be moved to the rear while traveling- Supports for straightening anvil