Used Heat treatment equipment for sale (8)

Condition: used, Year of construction: 1997, General SKU: 356S861 Location: Barneveld Make: SBMSchoeller-BleckmannMedizintechnikGmbH Type: VakuthermADV13815/2F No.: 001431 Year of construction: 1997 Pressure Working pressure: 3.3Bar Vacuum possible: ✔ Working pressure jacket: 2.75Bar Main Features Njljvzpc Eohcdwuskw Material: Stainlesssteel Volume: 2000Ltr. Pressure: 3Bar Vacuum: ✔ Specified Features - Autoclave Vertical autoclave: ✔ Notified body: (Tuv) Capacity: 2000Ltr Internal width: 800mm Internal depth: 1550mm Internal height: 1500mm Inlet/Outlet: DN40,DN25,DN15 Max. temperature: 140degr.C. With jacket: (580Ltr) Max. temperature: 140degr.C. Material: Stainlesssteel1.4404(316L) Information Floorspace: 3,0x2,0M Total height: 3,0M Extra Specifications: Heattransferfromsterilisator6.5KW(2x)Fanwithmotor2,2KW380Volt What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: used, Year of construction: 2011, Technical details: temperature min.: 1 ° temperature max.: 199 ° electrics - voltage/frequency: 380 / 50 V/Hz heating capacity: 1,8 (1800 Watt) kW protection class: IP 54 total power requirement: 16,2 kW Nelhcdsu Nw E Uswuskw weight of the machine ca.: 0,93 t dimensions L x W x H: 2,85 x 2,0 x 1,4 m Pre-polymerization tunnel - Heat treatment tunnel Application: drying for washing and painting lines - pass through Sold as is and described! other features: -recommended temperature according to manufacturer max. 80°C; safety setting 90°C; heating 230V -with chain conveyor/feed line made of Teflon -chain width 200mm -max. workpiece width 150mm passage W: 150 x H: 110mm, running height 600mm; operation motor SEW Eurodrive (gear motor) power 0,18kW loading W x H: 500 x 800mm unloading door W x H: 600 x 1200mm access door W x H: 800 x 980mm with safety locking system room height 1400mm *

Condition: good (used), max. temperature 1150 Grad dimensions of the machine ca. 1000 x 860 x 1500 mm weight of the machine ca. 200 kg Nominal temperature 1150 degrees Chamber: 260 x 160 x 500 mm deep (18.7 liter volume) Exterior: 1000 x 700 x 1400 mm high, mounted on base frame 50 Hz Nkolhcou I Etksdwuew 380 V 3 KW - with circulating air and fresh air, hinged door with snap lock - Electronic 2-point controller with automatic heating and switch-off - 2 shelves, inner lining made of special steel

Condition: excellent (used), Year of construction: 2014, operating hours: 2,731 h, Functionality: fully functional, machine/vehicle number: 60501401, type of input current: three-phase, total width: 2,000 mm, total length: 4,100 mm, total height: 2,800 mm, protection type (IP code): IP54, power: 30 kW (40.79 HP), Mechanical vapour recompression vacuum evaporator with forced circulation for water treatment. Nominal production of distillate: 15000 l/24h Nolhcdetuklhewuekw Comissioned in 2014 and hardly used, fully functional.

Condition: excellent (used), Year of construction: 2007, 0 200 °C internal dimension 1,2 x 1,3 x 2,0 m 0 400 V / 50 Hz Nslsuu S A Rjhcdwuskw 0 3000 l current capacity 23 Kw weight of the machine ca. 2 t dimensions of the machine ca. 2,0 x 1,7 x 2,7 m

Condition: new, Year of construction: 2018, Unused and installed De Lema type DLST/L dry heat steriliser / depyrogenation unit with Hosokawa Micron dispensing isolator. De Lema unit designed at 250 deg.c. for the depyrogenation of dry aluminium canisters with cycle time of approximately 7 hours. Nolhjuafg Secdwuskw Tray capacity between 15 & 35 canisters per tray depending on size. The Hosokawa unit designed for filling canisters with powder including closure and bagging of canisters. Dispensing time is approximately 1.33kgs/min depending on product, number of operators, distribution of canister size and filling volume. Total makespan between 22.9 minutes to 29 minutes depending on product and canister size. The system was designed to handle the following size canisters: - 2.5 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 144mm - 6.25 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 309mm - 12.5 litre with neck diameter 116mm, body diameter 175mm, height (w/o closure) 383mm - 32 litre with neck diameter 116mm, body diameter 300mm, height (w/o closure) 539mm System installed and commissioned but has never been operated on any products. Further technical specifications, additional information and site inspections are available upon request.

Condition: used, Year of construction: 1997, General SKU: 256N198 Location: Barneveld Make: GMFGOUDA Type: DiscPastillatorDP20/2 No.: DP47-2-1 Year of construction: 1997 Main Features Material: Stainlesssteel/Coated Specified Features - Belt cooler Cooling belt: dia.2000mmrotatingdiscs(2x) Nkjlhsvzn Nkjcdwuew With motor: 1,5kW Belt can be cooled: ✔ Feeding drop dosing device: ✔ With scraper: ✔ Outlet: dia.150mm Material: Stainlesssteel Information With switch: ✔ Weight: 6000kg CE: ✔ Floorspace: 6,6x3,3m Total height: 3,3m What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: used, Year of construction: 2006, General SKU: 354T964 Location: Barneveld Make: SteriflowThermalProcessing Type: Steriflow1311EAT No.: S3200 Year of construction: 2006 Pressure Working pressure: 5Bar Main Features Material: Stainlesssteel Volume: 2150Ltr. Pressure: 5Bar Specified Features - Autoclave Horizontal autoclave: ✔ Capacity: 2150Ltr. Internal diameter: 1300mm Internal depth: 1600mm Inlet/Outlet: 160/130mm With trays: ✔ Tray sizes: 470x430x45mm Max. temperature: 150°C Insulated: ✔ With pump: ✔ Motor: 4kW With transport trolley: ✔ Material: Stainlesssteel1.4301(304) Information Mounted on stainless st. frame: ✔ With switchgear: ✔(asis) Total height: 4,15m Weight: 2500kg CE: ✔ Nkjlsunn S Iehcdwuow Floorspace: 2,03x3,45m Extra Specifications: With: -Horizontaltank,volume:1700liters-Centrifugalpump-2xheatexchange rsSampletrolleywith- 5trays(440x480mm)25positions60x60mm-8tr ays (440x480mm)20positions80x80mm -2trays(440x480mm)18p ositionsø85mm-2trays(630x830mm)20postionsø120mm-2trays(630x830mm) 10slots  What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.