Used Master Bv77E Indirecte Diesel Heater for sale (13,634)

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 2 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors Nwedoqvlw Iepfx Aahjb operated with biodiesel or diesel/red diesel low noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 2.5 l per day Nwedpfoqvlu Ejx Aaheb Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Nwodpfsqvlvmjx Aahjb Clean combustion - no chimney required very economical - fuel consumption approx. 4 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low-noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Year of construction: 2014, operating hours: 1,700 h, condition: good (used), fuel type: diesel, Toro Z Master 7000 Zero-Turn Mower / Park Mower / Lawn Mower, 152CM Width, Kubota Diesel, 2014 Ongoing stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a rotating stock of machines, trucks, trailers, and attachments. All of our deliveries are at trade prices in AS-IS condition without warranties. (see our terms and conditions) For a viewing and/or test drive you can make a non-binding appointment. Please call ahead as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 Nsdpfx Aex Hir Ajahswb 5391 LR Nuland

Condition: new, ELMAG oil/diesel heating gun with chimney flue TURBOHEAT ODK 32 ADVANTAGES Heating guns with indirect combustion through chimney flue for closed rooms/halls or also for tent heating etc. Combustion with very high efficiency Stainless steel combustion chamber Safety switch-off in the event of flame/fan failure and overheating Desired temperature easily adjustable via rotary knob incl. 10 meter temperature sensor for measuring the room temperature TECHNICAL DATA Output 30 kW Air output 1100 m³/h Fuel consumption (heating) 3 l/h Tank capacity 50 l Mains voltage 230 V Nedpfx Aet Hvw Neahewb Flue gas connection Ø 110 mm Air outlet Ø 23 cm Dimensions LxWxH 1080x445x495 mm Weight 26.2 kg

Condition: good (used), Year of construction: 1993, operating hours: 604 h, Generator is in good condition, located on stock. Technical specification shown on plate. Nsdevkvvqopfx Aahjwb

Condition: used, Tires, solid rubber tires, forklift tires, complete wheels -Handover: in current condition as viewed -Tire condition: see photos -Manufacturer: Master Solid, solid rubber tires type Super Elastic 2 pieces -Tire size: 6.50-10 RIM 5.00F-10 -Bolt circle: Ø 150 x 13 mm -Recess: Ø 120 mm -Price/Delivery: complete -Dimensions each: Ø 570 x 160 mm Nwjdpfx Aajututcjhob -Weight: 48 kg/piece

Condition: good (used), For sale: PWB Swiss measuring device, model TOOL MASTER 310 Very good condition, complete, ready for operation Package includes: • TMA 21 control panel • LED displays • Dial gauge • Measuring socket for holders Nwjdpfx Aasw Humlshsb Features: • X and Z axis measurement • Tool setting and calibration for CNC tools • Easy operation • Length and diameter measurement Original user manual included Brand: PWB Swiss Model: Tool Master 310

Condition: good (used), Year of construction: 2004, operating hours: 500 h, functionality: fully functional, type of input current: AC, input voltage: 400 V, type of cooling: water, fuel: diesel, overall weight: 2,440 kg, continuous power (apparent): 178 kVA, continuous power: 160 kW (217.54 HP), rotational speed (max.): 1,500 rpm, Brand: SISU Model: G160S Year of manufacture: 2004 Serial number: 144871 Operating hours (read): Low hours Nedpfx Asxzplijahswb Capacity (kVA): 178 Capacity (kW): 160 Engine brand: SISU diesel Engine model: 634DSRAG Fuel: Diesel Alternator brand: Stamford Alternator model: UC 274H Voltage: 231-400 V Frequency (Hz): 50 RPM: 1500 Amperes (A): 257 Dimensions LxWxH (mm): 2550 x 1400 x 1870 Weight (kg) approx.: 2440 Quantity in stock: 1 Manufactured in: Finland / Netherlands Comments: >x emergency generator set, without electric panel

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2025701, total width: 2,600 mm, total length: 9,500 mm, total height: 1,900 mm, cutting length (max.): 530 mm, type of input current: three-phase, compressed air connection: 8 bar, power of the servo motor: 4,000 W, power: 4 kW (5.44 HP), overall weight: 8,000 kg, inner diameter: 76 mm, feed rate X-axis: 160 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 35 m/min, feed length X-axis: 530 mm, feed length Y-axis: 130 mm, feed length Z-axis: 800 mm, working width: 1,050 mm, input voltage: 380 V, installation height: 2,500 mm, The Master Bag 300X is a high-speed, roll-fed square bottom paper bag machine, built for industrial-scale production of paper bags without handles. Ideal for packaging flour, grains, sugar, bakery products, and dry foods, it supports bag widths from 150–330 mm and lengths up to 530 mm, offering outstanding flexibility for manufacturers focused on efficiency and sustainability. Equipped with YASKAWA servo motors and managed via a user-friendly HMI touchscreen, this machine automates the entire process—paper feeding, tube forming, cutting, and bottom forming—ensuring smooth operation and consistent production speeds of up to 220 bags per minute. Technical Specifications: Bag Length: 280–530 mm Bag Width: 150–330 mm Bottom Width (Gusset): 70–180 mm Paper Thickness: 60–150 gsm Max Speed: Up to 220 bags/min Paper Roll Width: 470–1050 mm Max Roll Diameter: 1500 mm Core Diameter: 76 mm Nwjdpewzm I Rsfx Aahsb Power Supply: 380V / 3-phase / 50Hz Installed Power: 8 kW Compressed Air: 6–8 bar Machine Weight: 8,000 kg Dimensions (L×W×H): 9500 × 2600 × 1900 mm Features: Fully servo-driven system (YASKAWA) Roll-fed operation with automatic tension control Photoelectric cutting length control for precision Multilingual HMI touchscreen interface Inline gluing, folding, bottom forming, and stacking Supports unprinted, printed, and PE-coated papers Optional inline printer available CE-certified for European and global compliance Application Sectors: The Master Bag 300X is engineered for a wide range of industries: Flour & Grain Packaging: 2- 5 kg kraft bags Dry Food & Sugar: Pasta, lentils, rice, baking mixes Bakery & Confectionery: Bread bags, pastries, cookies Retail & Grocery: Boutique, organic store, takeaway Pharma & Herbal: Powders, teas, supplements Pet Food: Eco-friendly packaging for dry goods Agricultural: Seeds, fertilizer, animal feed Fast Food & Deli: Leak-proof kraft bags DIY & Hardware: Screws, parts, and tools Eco Brands: Sustainable retail and e-commerce packaging The Master Bag 300X is a next-generation Square Bottom Paper Bag Machine, combining speed, precision, and eco-conscious technology. As a fully automatic Kraft Paper Bag Machine, it’s ideal for modern manufacturers looking to reduce plastic use while scaling up production. This 2025 Model is CE certified and built to meet strict international standards, making it a top choice in paper packaging machinery.

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 6,619 h, load capacity: 2,000 kg, lifting height: 6,000 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 2 = 1,000 – 2,500 kg Mast type: Triplex Nwjdpfeycahrox Aahob Condition: Ready for operation and fully functional Technical condition: good Battery voltage: 48V Battery year: 2025 Description: Narrow aisle forklift Sideshift,

Condition: used, Year of construction: 1994, The emergency power generator was rarely used; it was connected to the heating system, which is why it does not have a water cooler. There are a total of 2 units available; the price is for 1 unit. Nodpfxsxdc Eho Aahswb

Condition: good (used), Year of construction: 2001, 4 electric chain hoists, Fanr. CHAIN MASTER STAGE CONSTRUCTION Nwedpowd Tgfefx Aahob Type: VBG 70 LIFTKET, built in 2001. Lifting height: 20 m. Load capacity: 1000 kg without control block.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,256 h, load capacity: 2,000 kg, lifting height: 8,050 mm, free lift: 2,700 mm, fuel type: electric, mast type: triplex, construction height: 3,750 mm, battery capacity: 930 Ah, battery voltage: 48 V, fork length: 1,150 mm, overall weight: 7,810 kg, empty load weight: 7,810 kg, total height: 3,750 mm, total length: 2,800 mm, total width: 1,450 mm, maximum load weight: 2,000 kg, fuel: electricity, Equipment: lighting, pallet forks, sideshift, Very good condition Nwedpfx Aasx Rc Hhjhob We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: repair required (used), functionality: limited functionality, fuel type: diesel, maximum load weight: 7,000 kg, tire size: 6,5-20 Super, fuel: diesel, fuel consumption (combined): 16.1 l/100km, driver cabin: day cab, gearing type: mechanical, Year of construction: 1966, A classic vehicle is for sale. Ideal as a showpiece. It has been parked on the premises for several years; it is uncertain whether it will start. Water-cooled 6-cylinder inline 4-stroke engine featuring the low-noise M.A.N. Mittenkugel combustion process with direct jet injection 126 hp at 2,700 rpm Maximum torque 38 mkg at 1,400 rpm Bore 100 mm Nedox Hx Imspfx Aahswb

Condition: new, Year of construction: 2025, functionality: fully functional, center height: 180 mm, turning diameter over cross slide: 212 mm, spindle bore: 52 mm, turning length: 1,000 mm, quill stroke: 152 mm, quill diameter: 52 mm, turning diameter: 360 mm, spindle nose: ASA D1-6, spindle speed (max.): 2,500 rpm, spindle speed (min.): 20 rpm, overall weight: 1,470 kg, Equipment: rotational speed infinitely variable, The SUN MASTER RML-1440V is a high-speed precision universal engine lathe designed for accurate turning, threading and general metalworking. It features a rigid cast-iron bed, hardened and ground ways, a powerful variable-speed spindle with two-range gear head (20–400 / 400–2500 RPM), and a D1-6 spindle nose. The lathe includes a full quick-change gearbox, power feeds for both carriage and cross-slide, a 4-way tool post, tailstock with MT4 quill, foot brake, constant-surface-speed (CSS) function, coolant system and an integrated lubrication system. Nsdpfoxyh Nqjx Aahowb The RML-1440V provides stable performance, precise control, and versatility for both production and workshop applications. The lathe is locate in our warehouse and ready for shipment and any time.

Condition: used, Year of construction: 2011, functionality: limited functionality, We are offering for sale a used, automatic creasing and folding machine "Multigraf Touchline CF375" at a competitive price. The machine is operational, but the folding is not entirely precise and requires adjustment. Replacement motor with sensor included. Once adjusted, the machine can function properly, or you can use it for spare parts. Creasing and folding machine 6 standard folding types Easy operation via touchscreen Automatic job changeover without tools Piled feeder and suction belt feed Flexible delivery system Technical specifications: Feeder capacity: 180 mm Max. sheet format: 375 x 1,050 mm (with extension table) Nwodpfx Aaoxxb T Tehob Min. sheet format: 105 x 148 mm Double sheet detection: Yes Paper weight: 80–400 gsm or max. 0.4 mm Power supply: 100–240 V, 50/60 Hz Double sheet detection

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 6,500 kg, fuel type: diesel, tank capacity: 800 l, color: grey-black, power: 520 kW (707.00 HP), output current: 1,250 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 520 kW (707.00 HP), nominal power (apparent): 650 kVA, continuous power: 553 kW (751.87 HP), continuous power (apparent): 442 kVA, total length: 5,000 mm, total width: 1,650 mm, total height: 2,370 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU 12V1600G70F, type of cooling: water, Equipment: CE marking, ESP: 520 kW / 650 kVA PRP: 442 kW / 553 kVA Engine: MTU 12V1600G70F Emission level: not regulated Speed: 1,500 rpm Nsdoxy Izmopfx Aahowb Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (800 L) and vibration dampers •Coolant preheating •Voltage and frequency regulation according to ISO 8528-5

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5102, overall weight: 1,600 kg, fuel type: diesel, tank capacity: 190 l, color: grey-black, power: 88 kW (119.65 HP), output current: 160 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, total length: 2,675 mm, total width: 1,125 mm, total height: 1,645 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: FPT Iveco NEF45TM2A, type of cooling: water, Equipment: CE marking, ESP: 88 kW / 110 kVA PRP: 80 kW / 100 kVA Engine: FPT Iveco NEF45TM2A Emission level: stage II Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof Nwodpfx Aoxy Iqzeahjb •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (190 L) and vibration dampers •Coolant preheating •Voltage and frequency regulation according to ISO 8528-5

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 4877, overall weight: 1,050 kg, fuel type: diesel, tank capacity: 130 l, color: grey-black, power: 30.4 kW (41.33 HP), output current: 63 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 28 kW (38.07 HP), nominal power (apparent): 35 kVA, total length: 2,370 mm, total width: 1,120 mm, total height: 1,570 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins X3.3G1, type of cooling: water, Equipment: CE marking, PRP power: 28 kW / 35 kVA ESP power: 30,4 kW / 38 kVA Engine: Cummins X3.3G1 Emission level: non emmison Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof Nedsxyxvzepfx Aahewb •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (130 L) and vibration dampers •Coolant preheating •With integrated ATS switch •Voltage and frequency regulation according to ISO 8528-5

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5027, overall weight: 5,540 kg, fuel type: diesel, tank capacity: 800 l, color: grey-black, power: 528 kW (717.88 HP), output current: 1,000 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 480 kW (652.62 HP), nominal power (apparent): 600 kVA, total length: 5,015 mm, total width: 1,710 mm, total height: 2,725 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Baudouin 8M21G660/5, type of cooling: water, Equipment: CE marking, PRP power: 480 kW / 600 kVA ESP power: 528 kW / 660 kVA Engine: Baudouin 8M21G660/5 Emission level: not regulated Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (800 L) and vibration dampers •Coolant preheating Nsdpfx Aasxyxcnshowb •Voltage and frequency regulation according to ISO 8528-5

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5091, overall weight: 6,390 kg, fuel type: diesel, tank capacity: 990 l, color: grey, power: 660 kW (897.35 HP), output current: 1,250 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 600 kW (815.77 HP), nominal power (apparent): 750 kVA, total length: 5,240 mm, total width: 1,700 mm, total height: 2,720 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Baudouin 6M33G825/5, type of cooling: water, Equipment: CE marking, PRP power: 600 kW / 750 kVA ESP power: 660 kW / 825 kVA Engine: Baudouin 6M33G825/5 Emission level: non emmison Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Nodjxywtfopfx Aahjwb Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (990 L) and vibration dampers •Coolant preheating •Voltage and frequency regulation according to ISO 8528-5

Condition: repair required (used), Year of construction: 2008, Manufacturer: BECS Master Chiyoda Kogyo Co Tip: HWP 501 Year of manufacture: 2007 Max. Tube size 19 mm (1.5 mm wall thickness) Nwsdpfx Aaerigaiehjb The device is currently not working. PLC error

Condition: used, Drilling capacity: 35/40 mm Spindle mount: MK 4 throat: 230 mm Table size: 1050 x 625 mm Table height above floor: 560 mm small / large distance between table and drilling sleeve: 549/960 mm quill stroke: 170 mm Njdpfxjb N Ahls Aahjwb spindle speed infinitely variable: 50 - 800 rpm space requirement: 1050 x 1000 x 2170 mm Weight: 250 kg

Condition: excellent (used), functionality: fully functional, power: 115 kW (156.36 HP), gearing type: other, overall weight: 19,500 kg, Year of construction: 2020, operating hours: 1,928 h, For sale due to restructuring Nsdexp U Skepfx Aahswb The crusher is in very good condition Upgrades in November 2024 New crawler chassis with new chain New main discharge belt New wear plate (tile) on the outer rotor renewed Vibruine shock absorbers (feed hopper) Does not require Ad Blue AUWR badge 4-cylinder John Deere Total weight 20 tons Delivery possible