Used mills for sale (32)

Condition: used, Used Oliver & Batlle model HM-15 stainless steel bead mill. Nsdpfx Abjyw Tbvj Eokw Has stainless steel jacketed chamber which measures approximately 450mm long x 250mm diameter. Approximate total capacity 15 litre (product dependent). This equipment has a stainless steel rotor belt driven by 18.5kw, 415volt, 3/50, 1460rpm motor. Click on the link below to see a video of the machine running.

Condition: like new (used), Year of construction: 2019, Vibratory Mill / Ball Mill (Laboratory) The MM 500 control is a laboratory device for dry, wet, and cryogenic grinding. It is suitable for hard, brittle, soft, elastic, and fibrous materials and is used in a wide range of fields – from materials research and pharmaceuticals to geology as well as food and environmental analysis. The samples (up to 10 mm particle size) and grinding balls are placed in the grinding jars. These jars are inserted and positioned on the cooling plates. Oscillating movements of up to 30 Hz reduce the sample size through impact and friction forces. Optional cooling can be achieved using various media (LN², water, etc.). Final particle sizes as small as 0.1 µm can be achieved. The typical grinding process takes between 30 seconds and 30 minutes. Grinding balls are available in various materials (steel, stainless steel, tungsten carbide, zirconium oxide) and sizes (available from the manufacturer). Nsdpfx Aboywkqzs Eekw The machine offer includes two 125 ml grinding jars (material as shown in illustration). 10 mm hardened steel grinding balls are also included.

Condition: used, Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotation. Mill is equipped with electric cabinet, belt cover and set of screens (6 pcs). Specifications: Horsepower: 75 kW Nodpoyhc N Asfx Ab Ejkw Material Of Construction: Stainless steel Number Of Hammers/Row: 96 hammers / 24 rows Type: "U" type hammers

Condition: excellent (used), The product to be processed is fed into the screening chamber via a feed hopper. The built-in screen assembly consists of a conical stationary screen – Ø 200 mm, height 120 mm – and a two-blade rotor. The finished product then falls into a container to be provided. The discharge height is 1,100 mm. The screen chamber is mounted to the frame using quick-release fasteners. Nkjdpfx Abeytp T Eo Ejw The scope of delivery of the screening system includes 10 screen inserts. The drive is provided by an infinitely variable 5 kW Stoeber drive MNT 132S; EEX II; T3 via frequency converter, with a speed range of 0 – 1,400 rpm. Product throughput depends on screen size and product characteristics and ranges from 100 to 1,500 kg/h.

Year of construction: 1993, condition: used, Manufacturer: Forplex Model : FL 0 Type : Hammer mill Year : 1993 Capacity : 5 - 200 Kg / h Materials: Stainless steel Rotor type: hammer blades (result: fine and very fine) Particle size selection: Screening crown Rotor diameter: 145 mm Nedpfoyfw Ihox Ab Eekw Grid inner diameter: 150 mm Motor power: 2.2 kW Product feed: vibrating hopper Door security: key to start -> door locked Mobile frame on 4 wheels Support for filter

Year of construction: 1995, condition: used, Manufacturer: Forplex Model : F00 Year : 1995 Type : Hammer mill Material : stainless steel Capacity: a few kg/h. Rotor type: hammers (result: fine and medium-fine) Stator type: fixed hammers Nsdsyfw Ibopfx Ab Eokw Rotor diameter: 85 mm Inner diameter of grid: 100 mm Rotor type: hammer blades (result: fine and very fine) Particle size selection: Screening crown Vibrating feed hopper Motor power: 0.55 kW (3000 rpm) Door security Mobile frame on wheels    

Year of construction: 2015, condition: good (used), ATEX pin mill manufactured by Lleal in 2015, model K160D. Equipped with hopper and PTS filter prepared for pneumatic loading. It has a control panel but does not include a power distribution cabinet. Nkedpjym U Uhjfx Ab Eew

Condition: used, Used Buhler horizontal hammer mill. - Carbon steel rotor has diameter approximately 980 mm. Nsdpfx Ajygvnvsb Ejkw - Rotor is divided into 3 section. - Rotor has (8) shafts, each shaft is equipped with (10) swing hammers. - Rotor is driven by 75 kW, 380/660 V, 1480 rpm, 50 Hz electrical motor. - Includes number of spare screens and switchboard.

Condition: used, Used pin mill by Jehmlich (Germany) model Rekord D, designed in carbon steel. Mill body made of cast iron. Unit has milling discs with a diameter of 610 mm made of carbon steel. Mill has one fixed and one rotating milling disc driven by a belts driven with an ex proof electric motor with a power of 20 kW, 2940 rpm, 380 V, 50 Hz. Machine is equipped with a stainless steel feeding hopper and bottom unloading. Under the mill outlet is installed a screw conveyor constructed as follows: stainless steel chamber and a galvanized carbon steel screw driven by a gearbox and electric motor with power of 0,75 kW, 3-phase, 50 Hz with an operating speed of 125 rpm. Whole thing is mounted on a frame made of carbon steel. Specifications: Horsepower: 20 kW Material Of Construction: Cast iron and carbon steel Type Of Mill: Pin mill Nedpfxoygvpae Ab Eskw

Year of construction: 2003, condition: used, Manufacturer: Zanchetta Nsdpfx Abjx R Dk Is Eskw Model: Piraña Year: 2003   Type : Calibrator for granulated or wet products Applications: pharmaceutical, food, chemical, cosmetics …   Installed electrical power: 3 kW Power supply : 380V – 3 phases – 50 Hz Motor speed : 1440 rpm Dry air consumption: 15 L/min at 2.5 bars Available basket diameters: min Ø 800µ – max 4500µ Treated product moisture content: max. 10 %. 10 % Noise level: < 85 dBA Dimensions: 700 x 1500 x 1400 mm Height to drum axis: 900 mm Product infeed diameter : 150 mm Product outlet diameter : 150 mm Control panel with speed variation Paper documentation available

Year of construction: 2002, condition: used, Manufacturer : Comec Model: Micronet-25-COSM Year : 2002 Type : DISPERSION & MILLING MACHINE   Useful volume : 3 - 22 L Motor power : 4 kW Material : stainless steel Electrical cabinet with variable speed drive. Nkedpex R Dgpsfx Ab Ejw Work cycle timer for automatic stop. Double jacket Top loading of liquids Dispersion by deflocculating turbine + sand milling Continuous recirculation between the upper dispersion basket and the lower grinding chamber until the desired fineness is achieved. Cosmetic applications: Particularly suitable for the stable dispersion of oils in water, the addition of pigments and glues, and the mixing of colourants in products such as nail varnishes.

Year of construction: 1990, condition: used, Manufacturer : Fryma Model: MSM-18 Year: 1990   Type : Ball mill type Co-Ball Application: fine grinding of suspensions and highly viscous products. Nksdpfx Ajx R Dd Ieb Ejw Grinding chamber volume: 1.1 litres Internal overpressure: 2.5 bars Jacketed: 2 bars Motor power: 5.5 kW   Capacity: 20 – 80 l/h depending on product.   Examples: food: chocolate coatings / fillings cosmetics: lipsticks, pigment pastes pharmaceutiques : additifs chimiques : laquage pour les pigments, les peintures et les céramiques.  

Year of construction: 1998, condition: used, Manufacturer : Buhler Machine model: K60 Number: SRB 220 Year: 1998 Type: Bead mill / grinder with conical slot agitator. Nkedpfx Aex R A Daeb Esw   Dynamic pressure compensation in the mixer Cooling system for stator, rotor and separation ring. Grinding chamber volume: 4.8 dm3 / 4.8 liters Grinding chamber filling volume: 6.4 dm3 / 6.4 Litres Pressure system swept volume: 2.5 dm3 / 2.5 Litres Power rating: 30 kW Variable speed drive   Sold with progressive cavity pump PCM 2.6L10 Documentation available Product example : paints, pastes, …  

Year of construction: 2017, condition: used, Manufacturer: Tietjen Type: NDK 5.2-S Year: 2017 Type : Hammer mill Nkodjx R Aw Tspfx Ab Eow Applications : Designed for wet shredding of bulk food and agricultural products, Motor type : hydraulic Frame and rotor in stainless steel 304, 1.4301. Weight (excluding motor): 1250 kg Injection nozzles for liquids Bearing temperature monitoring Pneumatically operated inlet flap

Year of construction: 2014, condition: used, Manufacturer: Hosokawa Hosokawa Alpine Model: Contraplex 160 C Year : 2014 Type : pin mill + associated equipment Documentation : Hosokawa Alpine Contraplex 160 C Fine impact mill with two driven pin discs Motor power (frame side) : 7,5 KW Pin speed (frame side) : 16 500 rpm Number of rows of spindles (frame side) : 3 Motor power (door side) : 5,5 KW Pin speed (door side) : 12 000 rpm Number of rows of spindles (door side) : 2   Powder transfer Bohle MCL 300 container + stand Forced convection vacuum system Unloading hopper Nkedpfx Aex R Avvjb Eow Handling trolley  

Condition: excellent (used), Year of construction: 2004, overall weight: 500 kg, ATEX air micronizer mill manufactured by BACHILLER in stainless steel, model JET-MILL MSB305. High-efficiency equipment, highly suitable for the micronization of all types of powder products. Includes bag filter reference C9905. Njdpfxoxpx Age Ab Ejkw

Condition: excellent (used), Skid with pin mill made of stainless steel, with a plate diameter of 160 mm, a bag filter, and a hopper. Nksdpfx Aboxpx Dwe Ejw

Condition: excellent (used), Knife mill manufactured by COMITROL, model 1700. Motor power: 22 kW. Motor pulley diameter: 100 mm. Mill pulley diameter: 70 mm. Mill rotation speed: 4200 rpm. Nedpfx Abjxpx Dko Ejkw

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) Nkjdpfsx Tdyzsx Ab Eew • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: like new (used), Year of construction: 2015, Double-jacketed mobile tank with top agitation. 2 interchangeable agitators Supplied with lifting jib to change agitator. Nksdpst Iwf Defx Ab Ejw Model: LMX 500 Year:2015 Max. capacity: 500 Kg Agitation control by SIEMENS Panel

Year of construction: 2008, condition: good (used), Double-shell tank, temperature maintenance with electric resistance Capacity: 1000 liters (max. weight 1100kg) Max. permissible pressure: -1/ 1 bar Nodpfxot Iup He Ab Eokw Test pressure 1.5 bar Max. time allowed: 50 °C Minimum time: 20 °C

Condition: used, Year of construction: 1986, functionality: fully functional, Dry-ball mill – including new electric motor Nodpfx Abjxixiyo Eskw

Condition: refurbished (used), FREWITT MF 8 Granulator / Oscillating Mill This granulator with adjustable sieve/support tray device (thereby preventing excessive sieve and rotor wear) can be used universally for dry granulation, sieving, crushing, wet granulation, etc. with a capacity of 2,000 kg/hour depending on the product properties. Infinitely adjustable gear motor (43-248 oscillations/min) Opening of the granulating chamber: 380 x 490 mm Active sieve area: 775 cm² Nodpfx Ajxvzf Deb Ejkw Outlet height above floor: approx. 100 cm Drive motor: 2.2 kW Manufacturer: Frewitt Year of construction: 2002 Floor Space: 110 x 120 x 190 cm

Year of construction: 2021, condition: new, Hosokawa Alpine Mikropul ACM and ZPS spare parts for your mills ACM 2 - ACM 150 or ZPS 100 to ZPS 630. Other manufacture or types on request. We are able to deliver spare parts like: Classifier wheels, Liner, complete Bearing Assembly ( new or overhaul ), hammer with carbide face, shroud ring Nkjdpjgn Edlefx Ab Eow

Condition: used, Used Hosokawa Alpine ZPS 315 for sale. Nkjdpfx Abowdvt Us Esw Was used for powder coatings. Includes filter, cyclone, rotary valves, control cabinet, air intake cooler, and much more.