Used Hurlimann H-355 for sale (56,459)

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Iisdpfxjzt Ih Tj Ad Njh Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: not inspected (used), Year of construction: 2001, operating hours: 108,293 h, functionality: unexamined, machine/vehicle number: 45069, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling costs are included in the price. Automation is not included in the system. For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. Iisdpfx Adszrd Tpe Noh The machine has not been inspected but was operational until the end.

Year of construction: 2018, operating hours: 3,550 h, condition: good (used), fuel type: diesel, Kubota RTVX900 UTV Gator 4X4 Diesel with hydraulic tipper bed, 2018, 3550 hours Video available via WhatsApp. Ongoing stock, see website. Prices ex Nuland. Van de Wert Trading B.V. offers a changing inventory of machines, trucks, trailers and attachments. All our supplies are at trade prices and sold AS-IS without any guarantees. (see our general terms and conditions) For a viewing and/or test drive, you can schedule a non-binding appointment. Ijdpfxsyt Nr Ue Ad Neih Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45719, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling including linear robot. Automation is not included but can be purchased separately upon request. Automation is integrated; programming work may be required. For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. Ijdpezrd Ugefx Ad Noih The machine has not been tested but was operational until the end.

Condition: used, Year of construction: 1994, material width 2000 mm coil weight 35,0 t material thickness 0,6 - 2,5 mm coil internal diameter - 610 mm coil external diameter 900 - 1900 mm material cross-cut 1600 x 2,5 mm² no. of straightening rolls 13 straightening roll diameter 50 mm Iedozrpu Espfx Ad Nsih speed 0 - 60 m/min power requirement 81,0 + kW weight of straightening machine 14,5 t coil line consisting of: - decoiler make Schleicher, Type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, Type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, Type WV-SYS-A 160-2000, yom 1994

Condition: ready for operation (used), Year of construction: 1998, operating hours: 29,598 h, clamping force: 5,500 kN, screw diameter: 80 mm, total height: 2,230 mm, overall weight: 20,000 kg, product length (max.): 8,840 mm, This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information. • Maximum injection volume: 1,960 cm³ Ijdpfx Aox Nr H Isd Neih • Minimum mould height: 310 mm • Maximum mould height: 800 mm • Platen opening stroke: 850 mm • Platen dimensions (W x L): 1,345 x 1,280 mm • Tie-bar distance (H x V): 915 x 860 mm • Motor power: 55 kW • Heater power: 47.5 kW • Injection nozzle radius (at tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 • Operating hours: 29,598 h • Condition: Excellent Additional equipment • Robot: Not equipped • Robot interface: None • Other accessories: None reported

Condition: ready for operation (used), Year of construction: 2016, operating hours: 33,793 h, clamping force: 4,000 kN, screw diameter: 80 mm, overall weight: 31,000 kg, product length (max.): 10,259 mm, Hydraulic injection moulding machine manufactured in 2016. This Engel Victory 3550/400 tech features a clamping force of 4000 kN and an injection unit with a screw diameter of 80 mm. It includes a fully hydraulic tiebarless clamping system and advanced automation with conveyor belts. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 3550/400 tech machine we have for sale. Contact us for further details. • Injection unit: 3550 • L/D ratio: 25 • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Drive system: ECODRIVE SHV3-HSI, 2 pump systems, accumulator • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 282 kW • Clamping system: Tiebarless, fully hydraulic ENGEL clamping system • Centering: 160 mm • Ejector stroke: 250 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 4 on moving platen with Venturi nozzle and pressure switch • Pneumatic valve: 2/2-way valve R 1/4" on stationary platen Isdpfxsz Dgpbs Ad Noih • Pneumatic mold valve control: 4-fold FESTO, up to 16 bar • Mold heating: 32 control zones, max heating power 43 kW • Screw drive: Electromotoric, speed-controlled, max 150 rpm, rated power 47 kW, torque 3700 Nm • Nozzle radius: 15 mm • Nozzle bore: 6 mm • Nozzle contact force: approx. 150 kN • Metering stroke: 390 mm • MuCell equipment: MuCell Advanced Package; cylinder L/D 24/25; MuCell G25 screw Ø 80 mm; gas injector bore; melt pressure sensor; RS-485 interface to SCF gas plant; emergency stop connection • Mold temperature control: 3 ENGEL flomo distributors with 8 zones each (24 monitored circuits total) • Hydraulic tank capacity: Main tank approx. 690 l; suction tank approx. 290 l • Robot interface: Euromap 67 / AN-146 • Languages: Czech and German Additional equipment • Including GEKU robot

Condition: used, Year of construction: 1993, operating hours: 57,000 h, functionality: fully functional, rotational speed (min.): 1,413 rpm, input voltage: 400 V, Industrial DC Electric Motors 481 kW – IEG / Ansaldo Available: 2 high-power industrial direct current (DC) electric motors, manufactured by IEG Trieste – Ansaldo Industria, designed for heavy-duty industrial applications. The motors have been dismantled from an industrial plant and are in excellent condition, complete with dedicated ventilation systems and control panels. Ideal for the revamping of existing plants, rolling mills, extruders, large fans, hoisting installations, or other industrial high-torque applications. Main technical data: Manufacturer: IEG Trieste – Ansaldo Industria Type: Direct current (DC) motor Power: 481 kW Voltage: 400 V Rated current: 1530 A Speed: 1413 rpm Duty: S1 continuous Excitation: 220 V Year of manufacture: 1993 Operating hours: approx. 57,000 Equipment included: - Dedicated ventilation system - Electrical control and command panels - Technical documentation available On-site inspection possible Iijdpfxoytgk Ij Ad Njh

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z Iisdpfotqmvzox Ad Njh - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Condition: ready for operation (used), X-axis: 600mm, y-axis: 600mm, z-axis: 450mm, infinitely variable speed range (vertical and horizontal): 10-6,300rpm, AC main spindle drive power at 44% duty cycle: 9kW, drive power at 100% duty cycle: 6kW, max. torque: 800Nm, braking: electrical, number of gearbox stages: 4, max. spindle torque at 44% duty cycle: 800Nm, tool holder: SK40/ DIN69871, retention knob: DIN69872 B, min. clamping force: 12,000N, min. unclamping force: 3,000N, clamping surface of angle table: 530x900mm, number of T-slots: 8, T-slot width: 14H7, T-slot spacing: 63mm, max. workpiece weight: 400kg, coolant tank capacity: 150l, flow rate: 20l/min, connected load: 15kW, with tool holders and documentation. An on-site inspection is possible. Iodezavyrjpfx Ad Nsih

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, power: 720 kW (978.93 HP), color: black, output voltage: 400 V, continuous power (apparent): 800 kVA, output frequency: 50 Hz, Containerized Rotary UPS System Featuring Marelli Generator MJB 400 LB4 B2 & Rotabloc Flywheel Technology Model: MJB 355 MB4 B2 Rated Power: 900 kVA, 400V / 920 kVA, 440V Active Power: 720 kW Voltage: 400 V / 440 V Frequency: 50 Hz / 60 Hz Rated Current: 1155 A, 400V / 1207 A, 440V Speed: 1500 / 1800 rpm Power Factor: 0.8 Insulation Class: H Weight: 1950 kg Protection class: IP23 Bearings: 6317 C3 Lubrication: Mobil Polyrex EM Rotabloc RBT Alternator (Flywheel-Based UPS) Model Type: MJB-355 UPS Power Limitation:500 kVA Voltage Range: 400 V ±12.5% Iiodpowx H Hzofx Ad Nsh Current: 722 A Frequency: 50 Hz Speed: 1500 rpm Weight: 1950 kg Manufactured in Belgium Features & Benefits Rotary UPS – No batteries required. Compact footprint with integrated cooling Ideal for grid stability and critical systems Reliable European engineering (Belgium & Italy) CE marked, ready for international use

Condition: good (used), Year of construction: 1983, Reversible clamping device, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, dividing head, rotary indexing table -Model: AWH 355 -can be opened on one side -without hydraulic unit -with hydraulic valves -without control Iijdjb A Nn Tepfx Ad Nsh -controlled via cam switches -supported by clamping brackets for heavy machining -Clamping surface: Ø 350 mm -Peak height: 350 mm -braked: hydraulically -driven: hydraulically -Hydraulic motor speed: 10-1500 rpm -Swallowing volume: 20 cm³/rev -Dimensions: 680/360/H620 mm -Empty weight: 290 kg

Year of construction: 2023, condition: new, Unused item! Variable displacement pump, axial piston with swash plate design, for hydrostatic drives in open circuit. The new price was EUR 14,000.00 net. Mannesmann Rexroth replica, new part. The flow rate is proportional to the drive speed and displacement and can be infinitely adjusted at constant drive speed. Manufacturer: Zhen Yuan Model: A7VO355DR/63R-VPH02 Year of manufacture: 2023 Nominal size: 0-355 cm³ Control device: pressure regulator Displacement: 355 cm³ Max. speed: 1320 Isdpozt Iq Uofx Ad Nsih

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, sandwich panel construction Equipment: - Lashing rails - 6x lashing eyes - 30mm insulated wall Net price: €6,008.40 / Gross price: €7,150.00 Article number: TKC227351820.01 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 355 x 184 x 205 cm • External dimensions (LxWxH): 521 x 237 x 267 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Unladen weight: 775 kg • Payload: 1,925 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, robust, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust design • Floor made of Finnish plywood • Many cross members, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • 2-wing rear door with stainless steel locking mechanism • Continuous interior height: approx. 200cm • Continuous interior width: approx. 184cm • 2x maneuvering handles at the front • Doors with special sealing profiles made of hard/soft plastic • Rear frame made of hot-dip galvanized steel, welded • 6 lashing points embedded in the floor (750 DaN/kg) • Slot-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection around the interior Iiedpfx Asyivbzod Njh • Maintenance-free rubber spring axles from ALKO • Reverse automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door-ramp combination, side door, sandwich construction Equipment: - 6 lashing eyes - Lashing rails - 30mm insulated wall Net price: €8,983.19 / Gross price: €10,690.00 Article number: TKC227351820.09 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 355 x 184 x 205 cm • External dimensions (LxWxH): 521 x 237 x 267 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Tare weight: 810 kg • Payload: 1,890 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, robust, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust construction • Floor made of Finnish plywood • Many crossmembers, resulting in high point load capacity • Body made of very strong steel sheet sandwich, insulated, 50mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • Doors with special sealing profiles, made of hard/soft plastic • Side door, standard on the right front, approx. 70cm, with three-bolt safe locking system, can be locked from the inside and outside • Ramp & door combination • Aluminum loading ramps can be switched to wing doors • Loading possible via ramp or also with a forklift from the rear • Non-slip with gas struts • With 4 crossbars, hot-dip galvanized • Instead of 2 rear doors • With swivel latch, lockable • Load capacity max: 800 kg • Continuous interior height: approx. 200cm • Continuous interior width: approx. 180cm • 2x maneuvering handles at the front • Rear frame on hot-dip galvanized steel, massively welded • 6 lashing brackets embedded in the floor (750DaN/kg) • Slotted-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection around the interior • Maintenance-free rubber spring axles from ALKO • Reversing aid automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Isdpjzy Dkdofx Ad Njih Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: good (used), mileage: 533,634 km, power: 353 kW (479.95 HP), first registration: 03/2010, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, Equipment: ABS, AdBlue, air conditioning, central locking, crane, electric window regulation, power assisted steering, = Further options and accessories = - Brake booster - Speed limiter - Cab - Air horn - PTO (power take-off) - Sun visor flap - Toolbox = Further information = Technical information Transmission: I-Shift, automatic Front axle 1: Steered Front axle 2: Steered Weights Unladen weight: 28,080 kg Payload: 3,920 kg Gross vehicle weight: 32,000 kg Functional Boom: Telescopic (8 sections) Boom length: 19.65 m Lifting capacity: 20,350 kg Body brand: EFFER 1355/8S CROS-STAB Iijdpfjyiulrox Ad Noh CE marking: yes Condition Technical condition: good Optical condition: good VOLVO FH 480 8x4 Tractor unit + EFFER 1355/8S crane EURO 5 L PACKAGE 480 HP DRIVE 8x4 WHEELBASE 510 cm AIR SUSPENDED FH SLEEPER CAB WITH AIR CONDITIONING REFRIGERATOR I-SHIFT AUTOMATIC TRANSMISSION WITH ENGINE BRAKE ADJUSTABLE FIFTH WHEEL TOOLBOXES EFFER 1355/8S OIL COOLER FOR CRANE HYDRAULICS TOTAL 8X HYDRAULICALLY EXTENDABLE MAX WORKING HEIGHT 23 METERS!! MAX LIFTING CAPACITY 20350 KG MAX LIFTING CAPACITY AT 19.65 METERS 4080 KG LARGE HYDRAULIC WINCH WITH HOOK AND ROLLERS TOTAL 4X OUTRIGGERS CRANE CAN OPERATE 100% IN FRONT OF THE CAB THANKS TO CROSSTAB OUTRIGGER RADIO REMOTE CONTROL FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Year of construction: 2007, condition: excellent (used), vertical, centrifugal pump vertical centrifugal pump 30m3/h chemical pump FIP ALPHA VCM 50-33 Year of construction: 2007 DN: 50 Nominal flow rate 30 m³/h Nominal head 25 m p [track]: 16 T [°C]: -25 ÷ + 140 RPM: 1450 electrical power 11KW 400V 50Hz engine speed: 1450 length: 1550 mm width: 550 mm Implementation: Iodpfxjh T Dwfe Ad Neih vertical, radially split scroll casing pumps sump pump or channel impeller Applications: treatment of paints, aggressive and technological fluids, even in the presence of solid particles, in the chemical and petrochemical industries If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2021, operating hours: 998 h, Sennebogen 355 E, telehandler, year of manufacture: 2021, operating hours: only 998h!, incl. 2,500L grab bucket, additional hydraulics, hydraulic quick coupler, engine: Cummins B4.5-C165 [140 hp/103 kW], all-wheel drive and all-wheel steering (4x4x4) – crab steering, lifting capacity: 5,500kg, lifting height: 8,450mm, automatic level control, elevating cab to 4,250mm, operating weight: 11,800kg, very good condition, immediately ready for use. Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ... ). We are happy to assist you. Further information is available on our website. Subject to prior sale and errors excepted. Rental possible = More information = Iedpfxeyfq Tde Ad Njih Please contact Tobias Ebert for further details.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Iedpfozgq Szex Ad Neih Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: new, cutting diameter 355 mm dimensions of saw-band 3770 x 34 x 1,1 mm cutting speed 20 - 80 m/min cutting width 490 x 280 mm 290 mm Impact energy 250 mm 230 mm 180 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,7 t dimensions 1,43 x 0,72 x 1,7 m Isdpfxjmhm Aqs Ad Neih Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling

Condition: new, Extraction capacity of filter unit at spigot*: 3550 m³/h (free-eye) Total power consumption*: 0.88 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 73 db(A) Dimensions L/W/H in mm: L 1283 / W 1020 /H 595 Colour: RAL 7035 Weight: 170 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms (oil mist separator). Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard Isdpfx Ajh Rdypsd Nsih - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: used, gearing type: automatic, lifting height: 8,450 mm, Year of construction: 2021, operating hours: 998 h, Sennebogen 355 E, telehandler, year of manufacture: 2021, operating hours: only 998h!, incl. 2,500 l grab bucket, additional hydraulics, hydraulic quick coupler, engine: Cummins B4.5-C165 [140 hp/103 kW], all-wheel drive and all-wheel steering (4x4x4) – crab steering, lifting capacity: 5,500 kg, lifting height: 8,450 mm, self-levelling, lifting cab 4,250 mm, operating weight: 11,800 kg, very good condition, ready for immediate use. On request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. For more information, please visit our website. Subject to prior sale and errors. Iijdpfx Adsyfq Nrj Neh Cab, rental possible = More information = Engine brand: Diesel Lifting capacity: 5,500 kg Please contact Tobias Ebert for further information.

Condition: excellent (used), High-end hydraulic tool from the renowned manufacturer CEMBRE. This device delivers high clamping force and convenient operation thanks to battery power. Robust construction and reliability – equipment used in professional applications. 📊 Technical specifications: Manufacturer: CEMBRE Iiodpfjz Smyrex Ad Njh Model: B35-50D Clamping force: 35 kN (approx. 4 tons) Max. cross-section: up to 150 mm² (Cu) Power supply: battery-powered Year of manufacture: 2010 📦 Included: CEMBRE hydraulic press Battery Charger Transport case Documentation Additional items as shown in the photos 📦 Condition: Very good technical condition Fully functional Normal signs of use Ready for work

Year of construction: 2022, condition: used, New: No Field of application: Construction General condition: good Technical condition: good Iodpfxjz H Rzto Ad Nsih Visual appearance: good Serial number: 355.0.1417 Please contact Christopher Oldenburg for more information

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Matsuura G-tech (Fanuc), controller model: 16i, workpiece height (max.): 750 mm, workpiece diameter (max.): 650 mm, workpiece weight (max.): 400 kg, total height: 2,635 mm, total length: 5,870 mm, total width: 3,440 mm, table width: 500 mm, table length: 500 mm, table load: 400 kg, overall weight: 13,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained Matsuura H-Plus 405 with pallet pool. This is a highly compact machine with extensive machining capabilities and 240 tool positions in the magazine. The machine was manufactured in 2004 and is equipped with the Matsuura G-Tech 16i (Fanuc 16i) control system. Iisdez Rmk Topfx Ad Nsh Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 6 Table load capacity: 400 kg X-axis travel: 600 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table indexing: 0.001° Spindle mount: Mas BT40 Big Plus Spindle speed: 50 – 15,0001 rpm Spindle motor: 22/18.5 kW Magazine capacity: 240 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!