Used Edge sanders & profile sanders for sale (164)

Condition: good (used), Year of construction: 2014, operating hours: 50,000 h, Functionality: fully functional, machine/vehicle number: 2014.03.23, total length: 8,000 mm, total width: 2,200 mm, total height: 1,700 mm, type of input current: AC, input voltage: 400 V, space requirement length: 800 mm, power: 40 kW (54.38 HP), working width: 60 mm, material thickness: 60 mm, 2 machines availible for narrow, longitudinal piece sanding Bwjlqzajv T U A Ue Rxol construction: 3x left & 3x right - horisontal, paper sanding 360' vertical radius corner sanding 1x left & 1x right brushing speed approx 5m/min

Condition: used, Year of construction: 2013, Functionality: fully functional, From the liquidation of the company: Langzauner LZK4 edge sander Year of manufacture: 2013 Technical specifications: Table size 1250x400mm Side support table 400x250mm Sanding belt 200x3000mm Beljv Sd Svjqza Rxowl Pneumatic sanding belt tension Oscillation Sanding beam swivel range 0-45° Sanding table height adjustable Machine weight approx. 500kg Extraction connection 140mm With veneer sanding device Table extension and widening Roller stands

Condition: good (used), High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Handover: in current condition as viewed Bslqzsvzxlija Rxjwl -Condition: without grinding spindle -Grinding spindle for: Lathe -electric: operated -Motor: VEM 0.75 kW -Bracket: Ø 80 mm -Dimensions: see photos -Total dimensions: 600/370/H350 mm -Weight: 60 kg

Condition: used, Year of construction: 2002, machine/vehicle number: 02062, The right and left edges are sanded in one pass. Two brush sanding heads are installed on the left and right. Sequence: 1. the parts are conveyed via cross belts installed at 90 degrees to the feed direction Bolqzsuyln Soa Rxewl to the right side as seen in the feed direction. 2. the right edge is sanded, 2 sanding brush heads are installed, which are adjustable in height and inclination. 3. the parts are conveyed to the left side at 90 degrees to the feed direction The parts are conveyed to the left side as seen in the feed direction. 4. the left edge is sanded, 2 sanding brush heads are installed, which are adjustable in height and inclination. - Manufacturer: Supferfici, Delle Vedove - Part width: approx. 1,400mm - Height of the sanding head: 80mm - Sanding height: approx. 60mm - Length: approx. 8,800mm - Working height: 880mm - Year of construction: 2002 - For the control of the material a new Siemens S7-1200 is installed. - Location: at the warehouse

Condition: good (used), two milling units two motors 1,5kW pneumatic movement of heads sanding unit pneumatic pad band width 80mm motor power 1,5kW pneumatic oscillation two axes units regulation variable regulated feeder Bwslqzaohvzqao Rxjl

Condition: excellent (used), Comec chair component cross grinder Bwslqzjrrdv Toa Rxol 5.5kw main motor Grinding belt width 100mm Extraction nozzle 110mm Dimensions of the machine 233x60x140cm

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Volpato LVO 120 edge grinder SN 1929112 Year of manufacture 1999 Manufacturer: LASM Volpato Italy Bwslqzaovwdqco Rxol Small single-sided grinding center VOLPATO offers the LVO 120 grinding machine, with combined function that can make life easier for many professionals in the industry. It was developed under the direction of experienced company staff, who work with passion to achieve the best possible result. Vertical oscillating grinder 2.2 kW motor (3 HP) Swivel table 0-90 degrees Work table dim. 880 x 370 mm. Mechanically swiveling Additional support and "round" grinding wheels Belt dimensions 150 x 2580 mm. Suction device Weight 250 kg Overall dimensions: 700 x 1000 x 1150 mm. CE marking Technical data may change

Condition: refurbished (used), Dear customers currently we offer a reconditioned profile belt grinder for model and mold making of the brand Zimmermann. Here are the technical data of a machine type PS1: Table length: 650 mm table width: 600 mm rail width: 15 / 30 / 40 / 50 mm belt length: 2.700 mm grinding height: 350 mm Table tilting: 45 / 20 Voltage: 400V power: 1,4 / 1,85 kW speed: 1.500 / 3.000 rpm belt speed: 12 / 25 m/s suction nozzle diameter: 80 mm dimensions: 1.200 x 2.450 x 1.500 mm weight: 320 kg After the overhaul, the machines have a revised electrical system including motor brake, are painted in RAL 7035 light gray, have overhauled deflection and drive rollers installed and have a full range of accessories. Bwelqzjg Ewxdoa Rxel We are looking forward to your questions and inquiries.

Condition: excellent (used), Technical data: Working width: 960 MM 1 Combination unit Boljt Iv Azeqza Rxjwl Shaft diameter: 160 MM Height of processed material: 160 MM Grinding belt dimensions: 990x1800 mm Extraction spigot(s) diameter: 140 mm Electric lifting Digital display Safety switch Main motor power: 11 kW Voltage: 380V Overall dimensions: Length: 1550 mm Width: 1680 mm Height: 2200 mm

Condition: new, Bernardo edge sanding machine KSM 3000 C with veneer sanding device Technical specifications working table 960 x 350 mm table height adjustment 210 mm belt length 3000 mm belt width 150 mm sanding belt back 1060 x 200 mm sanding unit swivelling 90° - 45° Bjlqza Rod N Tdmexswl belt speed 20 m/sec. additional table 330 x 330 mm Oscillation stroke 20 mm Oscillation motor 0,25 kW (0,34 PS) suction connection Ø 120 mm Motor output power S1 100% 3,0 kW (4,0 PS) Motor input power S6 40% 4,5 kW (6,0 PS) Voltage 400 V Machine dimensions (W x D x H) 1910 x 840 x 1020 mm Weight approx. 330 kg Scope of delivery Sanding belt 3000 x 150 mm - K100 Sanding belt oscillation Veneer sanding device additional table Graphite coating Mitre fence Sanding shoe Suction hose Features - Heavy machine stand in torsion- and vibration-free construction, extremely stable - Grooved infeed fence, ideal for sanding veneer overhangs - Suction connection 80 / 100 mm on both sides for optimum chip removal - Oscillating sanding belt ensures high stock removal and a clean sanding pattern - Maintenance-free sanding belt oscillation with separate gear motor, optionally switchable - Height-adjustable sanding table for utilisation of the entire sanding belt - Standard veneer edge sanding device with fine adjustment - Quick changeover from veneer to solid wood sanding possible - Height adjustment of the working table or swivelling of the sanding unit via handwheels - spring

Condition: like new (used), - Belt width: 150 mm - Grinding possible on the platen or flat surface - Table angle adjustment - Capability to grind curved elements - Manual table height adjustment Bwjlqza Revz U Ugjxjl - Motor: 3.4 kW - 380 V - Year: 1992

Condition: new, machine/vehicle number: M1-KS2260, Holzprofi Maker oscillating edge belt sander, a solid sanding machine for craft and business Technical data: Band dimensions 2260 x 150 mm Engine power S1: 2,2 KW , 400 V Table length 750 mm Tabhle width 250 mm Bwjlqzaovw Ed Do Rxsl Belt speed 16 m/sec Space required 1325 x 570 mm Extraction connection 100 mm Weight 156 kg

Condition: ready for operation (used), Year of construction: 1989, grinding belt length: 2,600 mm, grinding belt width: 150 mm, space requirement width: 900 mm, space requirement length: 1,650 mm, Langzauner LZK 3/2 edge sanding machine motor power 2,2kW Belt dimension 2600 x 150 mm Belt speed 20m /sec Bwelqorgpw Aeza Rxjl Table dimensions 1000 x 350 mm Height adjustment 200 mm Weight 300 kg Space requirement 1650 x 900 mm Sanding unit 45° tiltable Veneer sanding unit Oscillation Feed console year of construction 1989 Condition: fully functional

Condition: refurbished (used), Dear customers currently we offer a reconditioned profile belt grinder for model and mold making of the brand Zimmermann. Here are the technical data of a machine type PS1/2: Table length: 650 mm table width: 600 mm rail width: 15 / 30 / 40 / 50 mm belt length: 2.700 / 3.200 mm grinding height: 350 mm Table tilting: 45 / 20 Voltage: 400V power: 1,4 / 1,85 kW Bwslqza Rof Eivljxol speed: 1.500 / 3.000 rpm belt speed: 12 / 25 m/s suction nozzle diameter: 80 mm dimensions: 1.200 x 2.450 x 2.100 mm Weight: 390 kg After the overhaul, the machines have a revised electrical system incl. motor brake, are painted in RAL 7035 light gray, have overhauled deflection and drive rollers installed and have full accessory equipment. We are looking forward to your questions and inquiries.

Condition: good (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: A050694, total length: 4,500 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 850 kg, height adjustment type: mechanical, input voltage: 400 V, extraction connection diameter: 160 mm, frequency: 50 Hz, grinding width: 140 mm, Grinder for narrow surfaces with the possibility of milling edges and grinding them. At the beginning there are two sanding units with oscillation and 160 mm wide belts, i.e. pre-sanding followed by smoothing, then two units milling the edges from above and below, equipped with cutters for rounding edges r-6 mm and further two units sanding with narrow belts after milling at the end, also with oscillation, and the last seventh unit with a brush wheel for smoothing. The machine is suitable for sanding wooden parts of solid wood and MDF boards, such as countertops of various types, shelves , elements of stairs, doors, windows and other various types of furniture and wooden construction elements. Ready to work possibility to check and start on site. Equipped with several sanding tapes and some parts. Bwslqouynnujza Rxjl

Condition: new, Edge sanding machine Bernardo HV 80 OSZI work table: 850 x 300 mmTable height adjustment: 90 mmBelt length: 2510 mmBelt width: 150 mmSanding belt rear wall: 950 x 200 mmSanding unit lockable: 90° / 0°Belt speed: 16 m/sec.Additional table: 300 x 250 mmSuction connection: Ø100 mmRoller diameter: 110 mmMotor output power: S1 1005 kW (2.0 PS)Motor input power: S6 401 kW (2.8 PS)Voltage: 400 VMachine dimensions (W x D x H)1400 x 680 x 1220 mmWeight approx. 148 kg Bwelqzasd Tb U So Rxel

Condition: like new (used), - Manual table adjustment - Manual belt angle adjustment - Belt width: 15 cm - Table width: 45 cm - Table length: 92 cm Bwelqza Rjvz Uwzoxjl - Feed speed: 3.7/22 m/min - Motor power: 2.2 kW - 400 V - Year: 2002

Condition: new, Equipped with a belt grinding tool it enables the clean, ready-to-cut finish of eight different, quickly adjustable radii by means of an oscillating sanding belt. The universal machine type RFM 320 S SET, equipped with an extra-­long machine table ensures time-saving complete machining of curved or chamfered edges in one operation. Belqof E Nqdsza Rxjwl Base version RFM 320 S SET: › Adjustable grinding tool for 8 radii (2, 3, 4, 5, 6, 8, 10 and 12.5 mm) › Chamfering equipment up to 16 mm depth (continuously) › Grinding belt oscillation with pneumatic belt cleaning › Integrated base for feed unit › 16A socket for feed unit › Suction connections Ø 80 mm inkl. premiling aggregate incl. wheels incl. pull- out table elongation Set-up dimensions approx. L x B x H in mm 1.300 x 690 x 1.010 Weight 145 kg

Condition: new, Type MM2617 Sand Pad Size 3120*170mm Sanding belt line speed 18m/s Working table angle 45  Working table size 1200*240mm*2 Bwoled N S Nzeqza Rxol Motor 4 kW

Condition: like new (used), Year of construction: 2015, Functionality: fully functional, Edge sanding machine Wesetlindner Type: KSM OIS-FK Belqzsv Avr Aja Rxswl - including veneer sanding device Motor power: 3.0 kW Ozillation Belt length: 3000 mm Belt width: 200 mm Suction nozzle: 140 mm including chassis and miter stop

Year of construction: 2005, Condition: good (used), machine/vehicle number: C9 15840, Profile brushing machine Tagliabue LB 2 Model: LB 2 TECHNICAL DATA: Year of manufacture: 2005 Bslqzaog Rn Iae Rxswl Tagliabue edge sander with 4 oscillanting sanding units. Two vertical rollers and 2 inner transversal rollers, for transversal brushing.

Year of construction: 2001, Condition: like new (used), flader brushing machine CMC futura bold x 2 6 agergate WIDE UP AGGREGATE, WIDE DOWN AGGREGATE, LEFT AND RIGHT NARROW AGGREGATE X 4 brushing machine flader CMC futura bold x 2 6 agergate Bjlqoi A Ivyeza Rxswl WIDE UP AGGREGATE, WIDE DOWN AGGREGATE, LEFT AND RIGHT NARROW AGGREGATE X 4 WIDTH 1200 mm smooth feed adjustment inverters

Condition: as good as new (ex-display), Kanten- und Profilschleifmaschine Endlosbandsystem KBA Um das Kantenbearbeiten von Massivholz, MDF und anderen Plattenwerkstoffen noch wirtschaftlicher und effektiver zu gestalten, wurde der Kantenbearbeitungsautomat der Maschinenbau Rehnen GmbH noch weiter entwickelt. Durch den modularen Maschinenaufbau kann der KBA mit verschiedenen Kantenschleifaggregaten, Fräsaggregaten, Profilschleifaggregaten und Bürstenaggregaten ausgerüstet werden. Somit können die Bearbeitungsaggregate mit unterschiedlichen Werkzeugen bestückt werden, was wiederum die Rüstzeiten der Maschine senkt. 1. Aggregat Schleifaggregat: - oszillierend Schleifen und Bolqzjh Dbdqja Rxjwl Feinschleifen über wendelgenutete Kontaktwalze und Schleifschuh - Oszillationshub: 30 bis 130 mm 2. Aggregat Fräsaggregat: - Radius bzw. Profil oder Fase oben und unten mit 12.000 1/min. - gesteuert über Frequenzumrichter - Aggregat ist tastend gelagert 3. Aggregat Fräsaggregat: - Radius bzw. Profil oder Fase oben und unten mit 12.000 1/min. - gesteuert über Frequenzumrichter - Aggregat ist tastend gelagert 4. Aggregat Profilschleifaggregat: - Schleifen der Profile, z.B. Radien oben und unten über Endlosbänder - Elektropneumatisch einsetzbarer und luftgekühlter Profilstahlschuh 5. Aggregat Profilschleifaggregat: - Schleifen der Profile, z.B. Radien oben und unten über Endlosbänder - Elektropneumatisch einsetzbarer und luftgekühlter Profilstahlschuh Technische Daten der Maschine: Materialstärke: 10-90mm Materiallänge: mind. 200 mm Materialbreite: mind. 50 mm (im Durchlauf) Schleifbandmaße (Kante): 2000x150 mm Schleifbandmaße (Profil): 1960 x 30 mm Vorschubgeschwindigkeit: 6 m/min 6,5 kW ca. 900 kg Gesamtleistung: Gewicht: Abmessungen: Absauganschlüsse: 1 x d =160 mm 20 1010-190080 pneumatische Bandspannung am Kantenschleifaggregat für KBA 30 1010-190050 Pneumatisch höhenverstellbare Oszillation, des Kantenschleifaggregates 40 1010-190060 Stufenlos regelbare Vorschubgeschwindigkeit für KBA 50 658-000005 HM-Kantenfräser D= 60 x 12 Z4, R=3 mm 60 658-000006 HM-Kantenfräser D= 60 x 12 Z4, R=5 mm 70 658-000009 HM-Kantenfräser D= 60 x 12 Z4, Fase 45° 80 652-000083 Profilschleifschuh 110° R=3 90 652-000081 Profilschleifschuh 110° R=5 100 652-000084 Profilschleifschuh 110° R = 45

Condition: new, edge sanding machine - made in AUSTRIA motor 2,2 kW, 400 V, 50 Hz oszillation 0,18 kW, 400 V, 50 Hz sanding belt length 3000 mm sanding belt width 200 mm work table seize 1000/ 300 mm weight 300 kg roller DM 120 mm sanding roller DM, exchangeable 65/ 115 mm small sanding table for round sanding 350/ 250 mm mitre fence Belqzae Dxrgs Rxswl suction DM 140 mm

Condition: new, - new -- The edge sanding machine type SK-1 is perfect for sandinglarge, curved and straight workpiece edges.- The main application area of the SK 1 is the sanding of radii andshaped parts.- The sanding unit with its radii of 80 mm, 300 mm and1000 mm also has a straight sanding surface available.- The pneumatic, infinitely height-adjustable oscillation andthe heavy cast iron sanding unit ensure completesanding belt utilization and precise sanding results.- The generously designed revolving work table with itsintegrated extraction system enables the user to work easily andergonomically.- The SK-1 is equipped with pneumatic unit oscillationand pneumatic belt tensioningTechnical data:Motor power: 4 kWBelt speed: 15 m/illation stroke: 30-150 mmBelt length: 2700 mmBelt width: 150 mmTable size: 2000 × 1000 mmSpace requirement: 3000 × 1500 mmSuction: 1 x 140 mmWeight: approx. 560 kgArt. 1020-200000 Bwjlqjvyupujza Rxel