Used debarkers for sale (78)

Condition: used, Bark remover Cambio 500 in good condition Hodewi Iz Ispfx Afzeh

Condition: used, Year of construction: 1997, VK 550 Combi 3R Debarker-Reducer Combination Hodpfsw Hy E Tjx Afzeh VK 550 frame with one ring reducer rotor and two counter-rotating debarker rotors. Debarker rotor opening: 620 mm. Service-friendly pull-out rotors for quick and safe maintenance. Ring changer for reducer ring.

Condition: reconditioned (used), B., VK26M (1974 series) with motorized discharge table: - Main engine - Feeding table ( driven ) - Output table - Control cabinet Including infeed and outfeed table, workshop inspected * - debarking capacity: 10cm - 61cm diameter - 4 main decision makers - 4 cutting blades - Rotor speed =235 rpm / min - Rotor öppning=65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( length of wood ) Hedjfn Iu Ijpfx Afzeh Dimension ( without infeed and outfeed table ) L= 9840mm Entry table: 3540mm x 1000mm x 1900 Main engine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Item 1 1 Content: Disassembly of machinery, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material of blade shafts on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: Piece V-belt for rotor drive Pos 4 1 Gear oil Pos 5 1 Material: Abrasive + Colours Pos 6 4 Valonkone piece peeling knife Pos 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : with 3-phase delta-start for 30 kw main motor with 3-phase delta start for 11 kW geared motor with start for 4 kw gear motor supply with start for 4 kw gear motor output Main Starter Emergency STOP

Condition: refurbished (used), Complete set of debarking knives for Valonkone VK26M consisting of: 4 pre-cutters 4 main cutters Hjdpfjq A Ic Ajx Afzjh *Incl. metal box

Condition: reconditioned (used), Year of construction: 1974, Valonkone VK26M (1974 series) with outfeed table: - Main machine - Feeding table ( driven ) - outfeed table - switch cabinet IMMEDIATELY available from stock Including infeed and outfeed table, workshop inspected * - Debarking capacity: 10cm - 61cm diameter - 4 main cutters - 4 cutting knives - Rotor speed =235 rpm / min - Rotor opening = 65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( wood length ) Dimension ( without infeed and outfeed table ) L= 9840mm infeed table: 3540mm x 1000mm x 1900 Main machine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Pos 1 1 Content: Machine disassembly, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material blade axles on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: piece of V-belt for rotor drive Item 4 1 Gear oil Item 5 1 Material: Abrasive + paints Item 6 4 Valonkone piece peeling blade Item 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : with 3-phase delta start for 30 kw main motor with 3-phase delta start for 11 kw geared motor with start for 4 kw geared motor infeed with start for 4 kw geared motor output Hsdpfx Afetwrp Dozsh Main starter Emergency STOP

Condition: used, Year of construction: 2013, EngineCAT C18; 600 hp / CAT C18; Hsdpfx Afswhw Smezoh 447kW Machine Length 42' 8" / 13.02m Weight 80,000 f/ 36,287kg Capacity up 175 t/h Drum Configuration Flail Drum - Width: 60" Diameter: 40" / Flail Drum: Width: 1.5m Diameter: 1.01m

Condition: new, functionality: fully functional, - New ball slewing ring - Outer diameter 1100 mm Hsdpfx Afswt Ry Ujzoh - Inner diameter 878 mm - Height 50 mm - 8 x M16 mounting holes - Renowned German manufacturer - Suitable for VK 26 models - Available immediately

Condition: new, Year of construction: 2025, - Dimensions 600 x 3,000 mm - M 56 conveyor chain with protective rollers and MS flights - 2.2 KW SEW gear motor for the feed chain drive - Automatic centering of the logs to the center of the rotor - Dimensions 1,500 x 4,500 mm - Machine for 6 - 35 cm logs Hsdpfx Afou Rpibozjh - 18.5 KW drive motor for the rotor - 4 pre-cutters - 4 main cutters - each with hydraulic pressure system - 1 pair of centering rollers in front of the rotor - 1 centered pair of rollers after the rotor - 4 KW SEW geared motor for driving the rollers - 30 m/min feed speed - 1 pair of non-driven rollers in the pull-out

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, round log debarker Valon Kone VK-820-C-3R, Type 820-RE/480/480-12/9-79-RHP-RS/3 Complete with a feed conveyor, feed speed up to 110 m/min Hedpsxg Tthsfx Afzoh Manufactured in 2005 Serviced in 2023, not in use since

Condition: refurbished (used), Debarking machine Valon Kone VK - 450 2RE Hodpfx Afjxhdtzszjh Debarker with infeed conveyor, for log size either up to 450 mm, reducer rotor and debarking rotor. The debarking rotor bearing is new.. The machine has been overhauled. 6-month warranty

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, For sale on behalf of a customer is a Segem ERT 100. The machine was operational until removal. The rotor bearing was replaced in September 2023 (approx. 2000 hours). Hodpfx Aoxhf N Dsfzeh

Condition: as good as new (ex-display), functionality: fully functional, Debarking machine Valon Kone 26 MX - About 6000m3 debarked with the machine - Built as a prototype - Frame extended and additional support rollers added for debarking longer material - Debarking input automatic - Equipped with two frequency converters to adjust the speed - Ready for OmronSysac or other measuring device - Platform/undercarriage built in 1991 - Crane Epsilon 21TM/year -91 - Renovated in summer -23 Hodouhcf Iepfx Afzoh - Machine/plant weight: 27 tons - Length: 15 m - Combination length 22m when transported. Also included: Scania 143 - Year 1991 - Air suspension on rear axles - Robson - Registered as a work machine Aggregate: Stamford 250 kw/Perkins 2000 series 340 hp - Hours of use, about 4000h - Perfect condition

Condition: reconditioned (used), functionality: fully functional, The VK550 two-rotor machine can be equipped with 480 mm or 620 mm rotors (alternatively, one rotor can be a reducer). It comes complete with a feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Hsdowfp Saepfx Afzoh

Condition: ready for operation (used), Cambio 75 feed conveyor, infeed conveyor wheels Hjdpfx Afjv Irvuezeh

Condition: reconditioned (used), VK 450 The debarker has been completely refurbished Hjdpfsq Hr N Iex Afzoh

Condition: excellent (used), Gearbox 71-75 Log diameter 750 mm Hsdsw Syn Ropfx Afzsh weight 10 t

Condition: good (used), Year of construction: 2000, functionality: fully functional, Cambio 500 debarking line consisting of: Infeed centering. Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. 80 m/min. Hydraulic rotor and feed rollers. Hodpfx Afjwxdimszeh Outfeed control unit. Tilting trough for long timber. Spare parts.

Condition: used, Valon Kone VK450 with infeed conveyor. Hodpfx Aevt S R Aefzoh

Condition: used, Valon Kone VK26M With infeed and outfeed conveyors. Hedpovgtz Nsfx Afzjh

Condition: used, Year of construction: 1999, functionality: fully functional, feed rate X-axis: 75 m/min, Min. log diameter: 11 cm Max. log diameter: 75 cm Feed speed: 75 m/min Rotor speed: 222 rpm Rotor motor: 75 kW Feed motor: 2.2 kW Hydraulic unit: 1.5 kW Infeed (to conveyor) and outfeed (wheel set) are included. In 2021, the rotor was completely replaced with a factory-overhauled rotor (invoice available). Control cabinets are not included! Year of manufacture is estimated to be the late 1990s. Hodpfxow Emhfj Afzeh Videos of the machine can be sent.

Condition: new, Year of construction: 2023, Debarker reducer disc with 5 or 6 knives, diam range 200, 300, 400 mm Hodpfx Afekhcx Sszeh

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Hjdpfjtk N Dksx Afzjh

Condition: used, Year of construction: 1992, functionality: unexamined, For sale a round log sorting line by Holtec. Equipped with a feeder for logs up to 16 meters long, a Cambio 66 debarker, a system for cutting logs into short logs, a Bruks feed reducer and 20 boxes for logs from 2.5 to 8 meters long. The line was dismantled about two months ago and transported to our site. Possibility of assembling and starting the line at the customer's - all elements are numbered. Very attractive price! Interested parties are invited to contact me Hjdsv Iv T Dopfx Afzeh

Condition: good (used), log diameter 100-660mm Hedev Ap Siepfx Afzeh transverse and longitudinal feeder included

Condition: new, Year of construction: 2025, functionality: fully functional, For sale: NEW debarker with reducer for root swellings. Year of manufacture: 2025 Technical specifications: Log diameters: 15-60 cm Log length: 100-300 cm Installed power: 60 kW Additionally: Hjdpfxewxvv Se Afzeh -> Log handling on the roller conveyor, -> Hydraulic ejection of debarked logs, -> Hydraulic centering pressure system. -> Horizontal bark conveyor included. -> All-season operator's cabin.